diff mbox

[v5,07/11] thermal: armada: Add support for Armada CP110

Message ID 20171219135719.9531-8-miquel.raynal@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Miquel Raynal Dec. 19, 2017, 1:57 p.m. UTC
From: Baruch Siach <baruch@tkos.co.il>

The CP110 component is integrated in the Armada 8k and 7k lines of
processors.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[<miquel.raynal@free-electrons.com>: renamed the register pointers as
well as some definitions related to the new register names and
simplified the init sequence for Armada 380]
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/thermal/armada_thermal.c | 33 ++++++++++++++++++++++++++-------
 1 file changed, 26 insertions(+), 7 deletions(-)

Comments

Gregory CLEMENT Dec. 20, 2017, 10:56 a.m. UTC | #1
Hi Miquel,
 
 On mar., déc. 19 2017, Miquel Raynal <miquel.raynal@free-electrons.com> wrote:

> From: Baruch Siach <baruch@tkos.co.il>
>
> The CP110 component is integrated in the Armada 8k and 7k lines of
> processors.
>
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
> [<miquel.raynal@free-electrons.com>: renamed the register pointers as
> well as some definitions related to the new register names and
> simplified the init sequence for Armada 380]
> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Here again, on Armada 7040 DB and Machitobin, the temperature value
looks coherent:

Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Gregory


> ---
>  drivers/thermal/armada_thermal.c | 33 ++++++++++++++++++++++++++-------
>  1 file changed, 26 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
> index c7dcac39cbf9..3785b5248bf5 100644
> --- a/drivers/thermal/armada_thermal.c
> +++ b/drivers/thermal/armada_thermal.c
> @@ -37,7 +37,6 @@
>  #define A375_UNIT_CONTROL_MASK		0x7
>  #define A375_READOUT_INVERT		BIT(15)
>  #define A375_HW_RESETn			BIT(8)
> -#define A380_HW_RESET			BIT(8)
>  
>  /* Legacy bindings */
>  #define LEGACY_CONTROL_MEM_LEN		0x4
> @@ -52,6 +51,10 @@
>  #define CONTROL0_TSEN_RESET		BIT(1)
>  #define CONTROL0_TSEN_ENABLE		BIT(2)
>  
> +/* EXT_TSEN refers to the external temperature sensors, out of the AP */
> +#define CONTROL1_EXT_TSEN_SW_RESET	BIT(7)
> +#define CONTROL1_EXT_TSEN_HW_RESETn	BIT(8)
> +
>  struct armada_thermal_data;
>  
>  /* Marvell EBU Thermal Sensor Dev Structure */
> @@ -153,12 +156,11 @@ static void armada380_init_sensor(struct platform_device *pdev,
>  {
>  	u32 reg = readl_relaxed(priv->control1);
>  
> -	/* Reset hardware once */
> -	if (!(reg & A380_HW_RESET)) {
> -		reg |= A380_HW_RESET;
> -		writel(reg, priv->control1);
> -		msleep(10);
> -	}
> +	/* Disable the HW/SW reset */
> +	reg |= CONTROL1_EXT_TSEN_HW_RESETn;
> +	reg &= ~CONTROL1_EXT_TSEN_SW_RESET;
> +	writel(reg, priv->control1);
> +	msleep(10);
>  }
>  
>  static void armada_ap806_init_sensor(struct platform_device *pdev,
> @@ -279,6 +281,19 @@ static const struct armada_thermal_data armada_ap806_data = {
>  	.needs_control0 = true,
>  };
>  
> +static const struct armada_thermal_data armada_cp110_data = {
> +	.is_valid = armada_is_valid,
> +	.init_sensor = armada380_init_sensor,
> +	.is_valid_bit = BIT(10),
> +	.temp_shift = 0,
> +	.temp_mask = 0x3ff,
> +	.coef_b = 1172499100ULL,
> +	.coef_m = 2000096ULL,
> +	.coef_div = 4201,
> +	.inverted = true,
> +	.needs_control0 = true,
> +};
> +
>  static const struct of_device_id armada_thermal_id_table[] = {
>  	{
>  		.compatible = "marvell,armadaxp-thermal",
> @@ -301,6 +316,10 @@ static const struct of_device_id armada_thermal_id_table[] = {
>  		.data       = &armada_ap806_data,
>  	},
>  	{
> +		.compatible = "marvell,armada-cp110-thermal",
> +		.data       = &armada_cp110_data,
> +	},
> +	{
>  		/* sentinel */
>  	},
>  };
> -- 
> 2.11.0
>
diff mbox

Patch

diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index c7dcac39cbf9..3785b5248bf5 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c
@@ -37,7 +37,6 @@ 
 #define A375_UNIT_CONTROL_MASK		0x7
 #define A375_READOUT_INVERT		BIT(15)
 #define A375_HW_RESETn			BIT(8)
-#define A380_HW_RESET			BIT(8)
 
 /* Legacy bindings */
 #define LEGACY_CONTROL_MEM_LEN		0x4
@@ -52,6 +51,10 @@ 
 #define CONTROL0_TSEN_RESET		BIT(1)
 #define CONTROL0_TSEN_ENABLE		BIT(2)
 
+/* EXT_TSEN refers to the external temperature sensors, out of the AP */
+#define CONTROL1_EXT_TSEN_SW_RESET	BIT(7)
+#define CONTROL1_EXT_TSEN_HW_RESETn	BIT(8)
+
 struct armada_thermal_data;
 
 /* Marvell EBU Thermal Sensor Dev Structure */
@@ -153,12 +156,11 @@  static void armada380_init_sensor(struct platform_device *pdev,
 {
 	u32 reg = readl_relaxed(priv->control1);
 
-	/* Reset hardware once */
-	if (!(reg & A380_HW_RESET)) {
-		reg |= A380_HW_RESET;
-		writel(reg, priv->control1);
-		msleep(10);
-	}
+	/* Disable the HW/SW reset */
+	reg |= CONTROL1_EXT_TSEN_HW_RESETn;
+	reg &= ~CONTROL1_EXT_TSEN_SW_RESET;
+	writel(reg, priv->control1);
+	msleep(10);
 }
 
 static void armada_ap806_init_sensor(struct platform_device *pdev,
@@ -279,6 +281,19 @@  static const struct armada_thermal_data armada_ap806_data = {
 	.needs_control0 = true,
 };
 
+static const struct armada_thermal_data armada_cp110_data = {
+	.is_valid = armada_is_valid,
+	.init_sensor = armada380_init_sensor,
+	.is_valid_bit = BIT(10),
+	.temp_shift = 0,
+	.temp_mask = 0x3ff,
+	.coef_b = 1172499100ULL,
+	.coef_m = 2000096ULL,
+	.coef_div = 4201,
+	.inverted = true,
+	.needs_control0 = true,
+};
+
 static const struct of_device_id armada_thermal_id_table[] = {
 	{
 		.compatible = "marvell,armadaxp-thermal",
@@ -301,6 +316,10 @@  static const struct of_device_id armada_thermal_id_table[] = {
 		.data       = &armada_ap806_data,
 	},
 	{
+		.compatible = "marvell,armada-cp110-thermal",
+		.data       = &armada_cp110_data,
+	},
+	{
 		/* sentinel */
 	},
 };