| Message ID | 20171220192702.32515-1-krzk@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Dear Krzysztof, On 2017년 12월 21일 04:27, Krzysztof Kozlowski wrote: > Convert all hex addresses in node unit addresses to lower case to > fix warnings like: > arch/arm64/boot/dts/exynos/exynos5433-tm2e.dtb: Warning (simple_bus_reg): > Node /soc/video-scaler@13C00000 simple-bus unit address format error, expected "13c00000" > > Conversion was done using sed: > $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm64/boot/dts/exynos/*.dts* > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > --- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 8 ++++---- > arch/arm64/boot/dts/exynos/exynos7.dtsi | 4 ++-- > 2 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > index 1962b8074349..0ba5df825eff 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > @@ -994,7 +994,7 @@ > reg = <0x145f0000 0x1038>; > }; > > - gsc_0: video-scaler@13C00000 { > + gsc_0: video-scaler@13c00000 { > compatible = "samsung,exynos5433-gsc"; > reg = <0x13c00000 0x1000>; > interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; > @@ -1008,7 +1008,7 @@ > power-domains = <&pd_gscl>; > }; > > - gsc_1: video-scaler@13C10000 { > + gsc_1: video-scaler@13c10000 { > compatible = "samsung,exynos5433-gsc"; > reg = <0x13c10000 0x1000>; > interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; > @@ -1022,7 +1022,7 @@ > power-domains = <&pd_gscl>; > }; > > - gsc_2: video-scaler@13C20000 { > + gsc_2: video-scaler@13c20000 { > compatible = "samsung,exynos5433-gsc"; > reg = <0x13c20000 0x1000>; > interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; > @@ -1049,7 +1049,7 @@ > power-domains = <&pd_mscl>; > }; > > - mfc: codec@152E0000 { > + mfc: codec@152e0000 { > compatible = "samsung,exynos5433-mfc"; > reg = <0x152E0000 0x10000>; > interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; > diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi > index 9a3fbed1765a..3504837b1d43 100644 > --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi > @@ -103,7 +103,7 @@ > #size-cells = <1>; > ranges; > > - pdma0: pdma@10E10000 { > + pdma0: pdma@10e10000 { > compatible = "arm,pl330", "arm,primecell"; > reg = <0x10E10000 0x1000>; > interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; > @@ -114,7 +114,7 @@ > #dma-requests = <32>; > }; > > - pdma1: pdma@10EB0000 { > + pdma1: pdma@10eb0000 { > compatible = "arm,pl330", "arm,primecell"; > reg = <0x10EB0000 0x1000>; > interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; > Looks good to me. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 1962b8074349..0ba5df825eff 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -994,7 +994,7 @@ reg = <0x145f0000 0x1038>; }; - gsc_0: video-scaler@13C00000 { + gsc_0: video-scaler@13c00000 { compatible = "samsung,exynos5433-gsc"; reg = <0x13c00000 0x1000>; interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; @@ -1008,7 +1008,7 @@ power-domains = <&pd_gscl>; }; - gsc_1: video-scaler@13C10000 { + gsc_1: video-scaler@13c10000 { compatible = "samsung,exynos5433-gsc"; reg = <0x13c10000 0x1000>; interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; @@ -1022,7 +1022,7 @@ power-domains = <&pd_gscl>; }; - gsc_2: video-scaler@13C20000 { + gsc_2: video-scaler@13c20000 { compatible = "samsung,exynos5433-gsc"; reg = <0x13c20000 0x1000>; interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; @@ -1049,7 +1049,7 @@ power-domains = <&pd_mscl>; }; - mfc: codec@152E0000 { + mfc: codec@152e0000 { compatible = "samsung,exynos5433-mfc"; reg = <0x152E0000 0x10000>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 9a3fbed1765a..3504837b1d43 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -103,7 +103,7 @@ #size-cells = <1>; ranges; - pdma0: pdma@10E10000 { + pdma0: pdma@10e10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10E10000 0x1000>; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; @@ -114,7 +114,7 @@ #dma-requests = <32>; }; - pdma1: pdma@10EB0000 { + pdma1: pdma@10eb0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10EB0000 0x1000>; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
Convert all hex addresses in node unit addresses to lower case to fix warnings like: arch/arm64/boot/dts/exynos/exynos5433-tm2e.dtb: Warning (simple_bus_reg): Node /soc/video-scaler@13C00000 simple-bus unit address format error, expected "13c00000" Conversion was done using sed: $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm64/boot/dts/exynos/*.dts* Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 8 ++++---- arch/arm64/boot/dts/exynos/exynos7.dtsi | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-)