[linux-sunxi,v2] ARM: sun6i: a31: Enable HDMI support on the Mele I7

Commit Message

Code Kipper Feb. 1, 2018, 8:37 a.m. UTC

From: Marcus Cooper <[e-mail]>

The Mele I7 has an HDMI connector wired to the HDMI pins
on the SoC. Enable the display pipeline and HDMI output.

Signed-off-by: Marcus Cooper <[e-mail]>
---
v2 changes compared to v1 are:
- Reordered nodes.
---
 arch/arm/boot/dts/sun6i-a31-i7.dts | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

Comments

Maxime Ripard Feb. 1, 2018, 3:19 p.m. UTC | #1

On Thu, Feb 01, 2018 at 09:37:37AM +0100, [e-mail] wrote:
> From: Marcus Cooper <[e-mail]>
> 
> The Mele I7 has an HDMI connector wired to the HDMI pins
> on the SoC. Enable the display pipeline and HDMI output.
> 
> Signed-off-by: Marcus Cooper <[e-mail]>

Applied, thanks!
Maxime

Patch

diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts
index 010a84c7c012..a3b70173c527 100644
--- a/arch/arm/boot/dts/sun6i-a31-i7.dts
+++ b/arch/arm/boot/dts/sun6i-a31-i7.dts
@@ -58,6 +58,17 @@ 
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -93,6 +104,10 @@ 
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -113,6 +128,16 @@ 
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
@@ -161,6 +186,10 @@ 
 	status = "okay";
 };
 
+&tcon0 {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;