@@ -5,3 +5,4 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb
new file mode 100644
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra194.dtsi"
+
+#include <dt-bindings/mfd/max77620.h>
+
+/ {
+ model = "NVIDIA Tegra194 P2888 Processor Module";
+ compatible = "nvidia,p2888", "nvidia,tegra194";
+
+ aliases {
+ sdhci0 = "/cbb/sdhci@3460000";
+ sdhci1 = "/cbb/sdhci@3400000";
+ serial0 = &uartb;
+ i2c0 = "/bpmp/i2c";
+ i2c1 = "/cbb/i2c@3160000";
+ i2c2 = "/cbb/i2c@c240000";
+ i2c3 = "/cbb/i2c@3180000";
+ i2c4 = "/cbb/i2c@3190000";
+ i2c5 = "/cbb/i2c@31c0000";
+ i2c6 = "/cbb/i2c@c250000";
+ i2c7 = "/cbb/i2c@31e0000";
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = "serial0:115200n8";
+ };
+
+ cbb {
+ serial@3110000 {
+ status = "okay";
+ };
+
+ /* SDMMC1 (SD/MMC) */
+ sdhci@3400000 {
+/*
+ cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>;
+*/
+ };
+
+ /* SDMMC4 (eMMC) */
+ sdhci@3460000 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+
+ vqmmc-supply = <&vdd_1v8ls>;
+ vmmc-supply = <&vdd_emmc_3v3>;
+ };
+
+ pmc@c360000 {
+ nvidia,invert-interrupt;
+ };
+ };
+
+ bpmp {
+ i2c {
+ status = "okay";
+
+ pmic: pmic@3c {
+ compatible = "maxim,max20024";
+ reg = <0x3c>;
+
+ interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&max20024_default>;
+
+ max20024_default: pinmux {
+ gpio0 {
+ pins = "gpio0";
+ function = "gpio";
+ };
+
+ gpio1 {
+ pins = "gpio1";
+ function = "fps-out";
+ maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+ };
+
+ gpio2 {
+ pins = "gpio2";
+ function = "fps-out";
+ maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+ };
+
+ gpio3 {
+ pins = "gpio3";
+ function = "fps-out";
+ maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+ };
+
+ gpio4 {
+ pins = "gpio4";
+ function = "32k-out1";
+ drive-push-pull = <1>;
+ };
+
+ gpio6 {
+ pins = "gpio6";
+ function = "gpio";
+ drive-push-pull = <1>;
+ };
+
+ gpio7 {
+ pins = "gpio7";
+ function = "gpio";
+ drive-push-pull = <0>;
+ };
+ };
+
+ fps {
+ fps0 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+ maxim,shutdown-fps-time-period-us = <640>;
+ };
+
+ fps1 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+ maxim,shutdown-fps-time-period-us = <640>;
+ maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
+ };
+
+ fps2 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+ maxim,shutdown-fps-time-period-us = <640>;
+ };
+ };
+
+ regulators {
+ in-sd0-supply = <&vdd_5v0_sys>;
+ in-sd1-supply = <&vdd_5v0_sys>;
+ in-sd2-supply = <&vdd_5v0_sys>;
+ in-sd3-supply = <&vdd_5v0_sys>;
+ in-sd4-supply = <&vdd_5v0_sys>;
+
+ in-ldo0-1-supply = <&vdd_5v0_sys>;
+ in-ldo2-supply = <&vdd_5v0_sys>;
+ in-ldo3-5-supply = <&vdd_5v0_sys>;
+ in-ldo4-6-supply = <&vdd_5v0_sys>;
+ in-ldo7-8-supply = <&vdd_1v8ls>;
+
+ sd0 {
+ regulator-name = "VDD_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sd1 {
+ regulator-name = "VDD_1V8HS";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v8ls: sd2 {
+ regulator-name = "VDD_1V8LS";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sd3 {
+ regulator-name = "VDD_1V8AO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sd4 {
+ regulator-name = "VDD_DDR_1V1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo0 {
+ regulator-name = "VDD_RTC";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo2 {
+ regulator-name = "VDD_AO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_emmc_3v3: ldo3 {
+ regulator-name = "VDD_EMMC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo5 {
+ regulator-name = "VDD_USB_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo6 {
+ regulator-name = "VDD_SDIO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo7 {
+ regulator-name = "VDD_CSI_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ };
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v0_sys: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+
+ regulator-name = "VIN_SYS_5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra194-p2888.dtsi"
+
+/ {
+ model = "NVIDIA Tegra194 P2972-0000 Development Board";
+ compatible = "nvidia,p2972-0000", "nvidia,tegra194";
+
+ cbb {
+ /* SDMMC1 (SD/MMC) */
+ sdhci@3400000 {
+ status = "okay";
+ };
+ };
+};
Add device tree files for the Tegra194 P2972-0000 development board. The board consists of the P2888 compute module and the P2822 baseboard. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> --- arch/arm64/boot/dts/nvidia/Makefile | 1 + arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 248 +++++++++++++++++++++ arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 16 ++ 3 files changed, 265 insertions(+) create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts