From patchwork Wed Feb 21 16:00:35 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Manivannan Sadhasivam X-Patchwork-Id: 10233333 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 0F9D760392 for ; Wed, 21 Feb 2018 16:03:47 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id E980328A49 for ; Wed, 21 Feb 2018 16:03:46 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id DDF7428A5C; Wed, 21 Feb 2018 16:03:46 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-1.9 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID autolearn=unavailable version=3.3.1 Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id 6D6AE28A56 for ; Wed, 21 Feb 2018 16:03:44 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:MIME-Version:Cc:List-Subscribe: List-Help:List-Post:List-Archive:List-Unsubscribe:List-Id:References: In-Reply-To:Message-Id:Date:Subject:To:From:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Owner; bh=0EnGcDLEWgL2tsBYb0sVvjK/nikxNWH3Yr3hFdiq3C4=; b=UpCRVLdketNLypz3n0dhGwhhES 1g52zasiXyHoPMA5i41vXJopPVOCwu/+1tEeXhZI3OkBdAZnzgsClGtpVHVRobkw/9DlyS802Dsa4 az4JrQRgBt0GO6JFfTp6rH33puQRAxDNYeEaqjinP0GNnNVI9dt0AOdeSm6v4Ko94wT2uWQn21D/5 rACkqEF82/jI0OhOAT8AzX+tTuWoSxVk+YfkdxPl7JFJ+EFLON8WrPf1/+LS7yvOKJPbFfXkBjNoq iXjGfHmf+ZgM3MdYGTvIIzb8T6UZhm3YozsN2NSltZ0o+vTe2sAwjyvUUCgZ+fFlFh5lpm/ekpmRJ lSA4LENQ==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.89 #1 (Red Hat Linux)) id 1eoWre-0004Re-IL; Wed, 21 Feb 2018 16:03:26 +0000 Received: from mail-pg0-x244.google.com ([2607:f8b0:400e:c05::244]) by bombadil.infradead.org with esmtps (Exim 4.89 #1 (Red Hat Linux)) id 1eoWqu-00043c-NJ for linux-arm-kernel@lists.infradead.org; Wed, 21 Feb 2018 16:02:54 +0000 Received: by mail-pg0-x244.google.com with SMTP id g12so801504pgs.0 for ; Wed, 21 Feb 2018 08:02:30 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=BcLVe9TabYsjsbbXSY1lU4ItWWIS0uePrST8vWY4AVY=; b=OMWPan11zYN/nh8e/oq6L0ivizMnS4peXPV9h3U7TdjH0+0HGtAJLq13UPJWPm2DcJ MESLUqN8ExLumzDT9ghe1x/5wGNjKb9BrjYklcjGfqaiWQcsWF2HYKbGCMi3ll9SaPe+ 4trNphxcjc3Rz1bjPe3F06HP8hvqSD37Q8Jgk= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=BcLVe9TabYsjsbbXSY1lU4ItWWIS0uePrST8vWY4AVY=; b=Gj7Q3qp7zO1eOylgpskN7eV8CK/khmaxGv7dwV6xB407B5UsIgvyotji6+vKrfZ0iM tCDtXkfJY8+iq1jWvmS14X2+y8MzAj+LTphBClUV7QPBoi89oafOXzTriOmUA4SfzFgA kqnxnrhhKpeCs4GXWZUg0iffkDmbJ/fVWIUlTFZO1DK8rlv4cag8hDu7DcNQrxB7ceJc gT2yCVN1jIgf596bZFV8Prdk5H1Qq8WXjTCoGkMqS9nR6i7WAngGIAU8FoNVXZMnQbbA glGFrRIBx9zd9vu7bkVeS2GOQdCrvPSyxnqm26ea6DuiLftJ+rpzaEFz9rCQAs+6+Nzs hK1g== X-Gm-Message-State: APf1xPAMehav4QOH1JD6evOH/yDDWxnxB0mtqkoulDa4o4e/gVjx7a39 di8njZ+Fk1msGwVtGfcbeipn X-Google-Smtp-Source: AH8x227+o0FtMv9VZqNOuYGfAG7IzJAWmsamlyYVBG3eMHj5d7u7533rji6spymUYxbjyASiYZfYiA== X-Received: by 10.98.36.217 with SMTP id k86mr3761839pfk.137.1519228949766; Wed, 21 Feb 2018 08:02:29 -0800 (PST) Received: from localhost.localdomain ([2405:204:7346:6848:3cb8:23ad:d761:239e]) by smtp.gmail.com with ESMTPSA id s67sm43068910pfg.104.2018.02.21.08.02.22 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Wed, 21 Feb 2018 08:02:29 -0800 (PST) From: Manivannan Sadhasivam To: linus.walleij@linaro.org, robh+dt@kernel.org, afaerber@suse.de Subject: [PATCH v2 01/10] dt-bindings: pinctrl: Add bindings for Actions S900 SoC Date: Wed, 21 Feb 2018 21:30:35 +0530 Message-Id: <20180221160044.15089-2-manivannan.sadhasivam@linaro.org> X-Mailer: git-send-email 2.14.1 In-Reply-To: <20180221160044.15089-1-manivannan.sadhasivam@linaro.org> References: <20180221160044.15089-1-manivannan.sadhasivam@linaro.org> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20180221_080241_114155_E6CAB2BD X-CRM114-Status: GOOD ( 17.23 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, daniel.thompson@linaro.org, hzhang@ucrobotics.com, bdong@ucrobotics.com, liuwei@actions-semi.com, linux-kernel@vger.kernel.org, amit.kucheria@linaro.org, linux-gpio@vger.kernel.org, mp-cs@actions-semi.com, 96boards@ucrobotics.com, Manivannan Sadhasivam , linux-arm-kernel@lists.infradead.org MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP Add pinctrl bindings for Actions Semi S900 SoC Signed-off-by: Manivannan Sadhasivam Reviewed-by: Rob Herring --- .../bindings/pinctrl/actions,s900-pinctrl.txt | 178 +++++++++++++++++++++ 1 file changed, 178 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt new file mode 100644 index 000000000000..fb87c7d74f2e --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt @@ -0,0 +1,178 @@ +Actions Semi S900 Pin Controller + +This binding describes the pin controller found in the S900 SoC. + +Required Properties: + +- compatible: Should be "actions,s900-pinctrl" +- reg: Should contain the register base address and size of + the pin controller. +- clocks: phandle of the clock feeding the pin controller + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + +Pinmux functions are available only for the pin groups while pinconf +parameters are available for both pin groups and individual pins. + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +Required Properties: + +- pins: An array of strings, each string containing the name of a pin. + These pins are used for selecting the pull control and schmitt + trigger parameters. The following are the list of pins + available: + + eth_txd0, eth_txd1, eth_txen, eth_rxer, eth_crs_dv, + eth_rxd1, eth_rxd0, eth_ref_clk, eth_mdc, eth_mdio, + sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, i2s_lrclk0, + i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1, + pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, eram_a5, + eram_a6, eram_a7, eram_a8, eram_a9, eram_a10, eram_a11, + lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp, + lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, + lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp, + lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean, + sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, sd1_d1, + sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk, + spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx, + uart0_tx, uart2_rx, uart2_tx, uart2_rtsb, uart2_ctsb, + uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb, uart4_rx, + uart4_tx, i2c0_sclk, i2c0_sdata, i2c1_sclk, i2c1_sdata, + i2c2_sclk, i2c2_sdata, csi0_dn0, csi0_dp0, csi0_dn1, + csi0_dp1, csi0_cn, csi0_cp, csi0_dn2, csi0_dp2, csi0_dn3, + csi0_dp3, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, + dsi_cn, dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sensor0_pclk, + csi1_dn0,csi1_dp0,csi1_dn1, csi1_dp1, csi1_cn, csi1_cp, + sensor0_ckout, nand0_d0, nand0_d1, nand0_d2, nand0_d3, + nand0_d4, nand0_d5, nand0_d6, nand0_d7, nand0_dqs, + nand0_dqsn, nand0_ale, nand0_cle, nand0_ceb0, nand0_ceb1, + nand0_ceb2, nand0_ceb3, nand1_d0, nand1_d1, nand1_d2, + nand1_d3, nand1_d4, nand1_d5, nand1_d6, nand1_d7, nand1_dqs, + nand1_dqsn, nand1_ale, nand1_cle, nand1_ceb0, nand1_ceb1, + nand1_ceb2, nand1_ceb3, sgpio0, sgpio1, sgpio2, sgpio3 + +- groups: An array of strings, each string containing the name of a pin + group. These pin groups are used for selecting the pinmux + functions. + + lvds_oxx_uart4_mfp, rmii_mdc_mfp, rmii_mdio_mfp, sirq0_mfp, + sirq1_mfp, rmii_txd0_mfp, rmii_txd1_mfp, rmii_txen_mfp, + rmii_rxer_mfp, rmii_crs_dv_mfp, rmii_rxd1_mfp, rmii_rxd0_mfp, + rmii_ref_clk_mfp, i2s_d0_mfp, i2s_d1_mfp, i2s_lr_m_clk0_mfp, + i2s_bclk0_mfp, i2s_bclk1_mclk1_mfp, pcm1_in_out_mfp, + pcm1_clk_mfp, pcm1_sync_mfp, eram_a5_mfp, eram_a6_mfp, + eram_a7_mfp, eram_a8_mfp, eram_a9_mfp, eram_a10_mfp, + eram_a11_mfp, lvds_oep_odn_mfp, lvds_ocp_obn_mfp, + lvds_oap_oan_mfp, lvds_e_mfp, spi0_sclk_mosi_mfp, spi0_ss_mfp, + spi0_miso_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp, + uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp, + sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_clk_mfp, + uart0_rx_mfp, nand0_d0_ceb3_mfp, uart0_tx_mfp, i2c0_mfp, + csi0_cn_cp_mfp, csi0_dn0_dp3_mfp, csi1_dn0_cp_mfp, + dsi_dp3_dn1_mfp, dsi_cp_dn0_mfp, dsi_dp2_dn2_mfp, + nand1_d0_ceb1_mfp, nand1_ceb3_mfp, nand1_ceb0_mfp, + csi1_dn0_dp0_mfp, uart4_rx_tx_mfp + + + These pin groups are used for selecting the drive strength + parameters. + + sgpio3_drv, sgpio2_drv, sgpio1_drv, sgpio0_drv, + rmii_tx_d0_d1_drv, rmii_txen_rxer_drv, rmii_crs_dv_drv, + rmii_rx_d1_d0_drv, rmii_ref_clk_drv, rmii_mdc_mdio_drv, + sirq_0_1_drv, sirq2_drv, i2s_d0_d1_drv, i2s_lr_m_clk0_drv, + i2s_blk1_mclk1_drv, pcm1_in_out_drv, lvds_oap_oan_drv, + lvds_oep_odn_drv, lvds_ocp_obn_drv, lvds_e_drv, sd0_d3_d0_drv, + sd1_d3_d0_drv, sd0_sd1_cmd_clk_drv, spi0_sclk_mosi_drv, + spi0_ss_miso_drv, uart0_rx_tx_drv, uart4_rx_tx_drv, uart2_drv, + uart3_drv, i2c0_drv, i2c1_drv, i2c2_drv, sensor0_drv + + These pin groups are used for selecting the slew rate + parameters. + + sgpio3_sr, sgpio2_sr, sgpio1_sr, sgpio0_sr, rmii_tx_d0_d1_sr, + rmii_txen_rxer_sr, rmii_crs_dv_sr, rmii_rx_d1_d0_sr, + rmii_ref_clk_sr, rmii_mdc_mdio_sr, sirq_0_1_sr, sirq2_sr, + i2s_do_d1_sr, i2s_lr_m_clk0_sr, i2s_bclk0_mclk1_sr, + pcm1_in_out_sr, sd1_d3_d0_sr, sd0_sd1_clk_cmd_sr, + spi0_sclk_mosi_sr, spi0_ss_miso_sr, uart0_rx_tx_sr, + uart4_rx_tx_sr, uart2_sr, uart3_sr, i2c0_sr, i2c1_sr, i2c2_sr, + sensor0_sr + +- function: An array of strings, each string containing the name of the + pinmux functions. These functions can only be selected by + the corresponding pin groups. The following are the list of + pinmux functions available: + + eram, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0, + uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1, + pcm0, pcm1, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, sd0, + sd1, sd2, sd3, i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, lvds, + usb30, usb20, gpu, mipi_csi0, mipi_csi1, mipi_dsi, nand0, + nand1, spdif, sirq0, sirq1, sirq2 + +Optional Properties: + +- bias-bus-hold: No arguments. The specified pins should retain the previous + state value. +- bias-high-impedance: No arguments. The specified pins should be configured + as high impedance. +- bias-pull-down: No arguments. The specified pins should be configured as + pull down. +- bias-pull-up: No arguments. The specified pins should be configured as + pull up. +- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified + pins +- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified + pins +- slew-rate: Integer. Sets slew rate for the specified pins. + Valid values are: + <0> - Slow + <1> - Fast +- drive-strength: Integer. Selects the drive strength for the specified + pins in mA. + Valid values are: + <2> + <4> + <8> + <12> + +Example: + + pinctrl: pinctrl@e01b0000 { + compatible = "actions,s900-pinctrl"; + reg = <0x0 0xe01b0000 0x0 0x1000>; + clocks = <&cmu CLK_GPIO>; + + uart2-default: uart2-default { + pinmux { + groups = "lvds_oep_odn_mfp"; + function = "uart2"; + }; + pinconf { + groups = "lvds_oep_odn_drv"; + drive-strength = <12>; + }; + }; + };