| Message ID | 20180226211901.9805-1-embed3d@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Feb 26, 2018 at 10:19:01PM +0100, Philipp Rossak wrote: > This patch fixes a bug, that prevents the Allwinner A83T and the A80 > from a successful boot. > > The bug is there since v4.16-rc1 and appeared after the clk branch was > merged. > > You can find the shortend trace below: > > Unable to handle kernel NULL pointer dereference at virtual address > 00000000 > pgd = (ptrval) > [00000000] *pgd=00000000 > Internal error: Oops: 5 [#1] SMP ARM > Modules linked in: > CPU: 0 PID: 49 Comm: kworker/0:1 Not tainted 4.15.0-10190-gb89e32ccd1be #2 > Hardware name: Allwinner sun8i Family > Workqueue: events deferred_probe_work_func > PC is at clk_hw_get_rate+0x0/0x34 > LR is at ac100_clkout_determine_rate+0x48/0x19c > > [ ... ] > > (clk_hw_get_rate) from (ac100_clkout_determine_rate+0x48/0x19c) > (ac100_clkout_determine_rate) from (clk_core_set_rate_nolock+0x3c/0x1a0) > (clk_core_set_rate_nolock) from (clk_set_rate+0x30/0x88) > (clk_set_rate) from (of_clk_set_defaults+0x200/0x364) > (of_clk_set_defaults) from (platform_drv_probe+0x18/0xb0) > > To fix that bug, we first check if the return of the > clk_hw_get_parent_by_index is non zero. If it is zero we skip that > clock parent. > > The BUG report could be found here: https://lkml.org/lkml/2018/2/10/198 > > Fixes: 04940631b8d2 ("rtc: ac100: Add clk output support") > > Signed-off-by: Philipp Rossak <embed3d@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Thanks! Maxime
On 26/02/2018 at 22:19:01 +0100, Philipp Rossak wrote: > This patch fixes a bug, that prevents the Allwinner A83T and the A80 > from a successful boot. > > The bug is there since v4.16-rc1 and appeared after the clk branch was > merged. > > You can find the shortend trace below: > > Unable to handle kernel NULL pointer dereference at virtual address > 00000000 > pgd = (ptrval) > [00000000] *pgd=00000000 > Internal error: Oops: 5 [#1] SMP ARM > Modules linked in: > CPU: 0 PID: 49 Comm: kworker/0:1 Not tainted 4.15.0-10190-gb89e32ccd1be #2 > Hardware name: Allwinner sun8i Family > Workqueue: events deferred_probe_work_func > PC is at clk_hw_get_rate+0x0/0x34 > LR is at ac100_clkout_determine_rate+0x48/0x19c > > [ ... ] > > (clk_hw_get_rate) from (ac100_clkout_determine_rate+0x48/0x19c) > (ac100_clkout_determine_rate) from (clk_core_set_rate_nolock+0x3c/0x1a0) > (clk_core_set_rate_nolock) from (clk_set_rate+0x30/0x88) > (clk_set_rate) from (of_clk_set_defaults+0x200/0x364) > (of_clk_set_defaults) from (platform_drv_probe+0x18/0xb0) > > To fix that bug, we first check if the return of the > clk_hw_get_parent_by_index is non zero. If it is zero we skip that > clock parent. > > The BUG report could be found here: https://lkml.org/lkml/2018/2/10/198 > > Fixes: 04940631b8d2 ("rtc: ac100: Add clk output support") > > Signed-off-by: Philipp Rossak <embed3d@gmail.com> > --- > > Changes in v4: > * add more information to the comment > Changes in v3: > * add information when the bug appeared > * make the comment more clear > Changes in v2: > * add tag Fixes: ... to commit message > * add comment to if statement why we are doing this check > > drivers/rtc/rtc-ac100.c | 24 +++++++++++++++++++++++- > 1 file changed, 23 insertions(+), 1 deletion(-) > Applied, thanks.
diff --git a/drivers/rtc/rtc-ac100.c b/drivers/rtc/rtc-ac100.c index 8ff9dc3fe5bf..08ca8c46a8ff 100644 --- a/drivers/rtc/rtc-ac100.c +++ b/drivers/rtc/rtc-ac100.c @@ -183,7 +183,29 @@ static int ac100_clkout_determine_rate(struct clk_hw *hw, for (i = 0; i < num_parents; i++) { struct clk_hw *parent = clk_hw_get_parent_by_index(hw, i); - unsigned long tmp, prate = clk_hw_get_rate(parent); + unsigned long tmp, prate; + + /* + * The clock has two parents, one is a fixed clock which is + * internally registered by the ac100 driver. The other parent + * is a clock from the codec side of the chip, which we + * properly declare and reference in the devicetree and is + * not implemented in any driver right now. + * If the clock core looks for the parent of that second + * missing clock, it can't find one that is registered and + * returns NULL. + * So we end up in a situation where clk_hw_get_num_parents + * returns the amount of clocks we can be parented to, but + * clk_hw_get_parent_by_index will not return the orphan + * clocks. + * Thus we need to check if the parent exists before + * we get the parent rate, so we could use the RTC + * without waiting for the codec to be supported. + */ + if (!parent) + continue; + + prate = clk_hw_get_rate(parent); tmp = ac100_clkout_round_rate(hw, req->rate, prate);
This patch fixes a bug, that prevents the Allwinner A83T and the A80 from a successful boot. The bug is there since v4.16-rc1 and appeared after the clk branch was merged. You can find the shortend trace below: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = (ptrval) [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 49 Comm: kworker/0:1 Not tainted 4.15.0-10190-gb89e32ccd1be #2 Hardware name: Allwinner sun8i Family Workqueue: events deferred_probe_work_func PC is at clk_hw_get_rate+0x0/0x34 LR is at ac100_clkout_determine_rate+0x48/0x19c [ ... ] (clk_hw_get_rate) from (ac100_clkout_determine_rate+0x48/0x19c) (ac100_clkout_determine_rate) from (clk_core_set_rate_nolock+0x3c/0x1a0) (clk_core_set_rate_nolock) from (clk_set_rate+0x30/0x88) (clk_set_rate) from (of_clk_set_defaults+0x200/0x364) (of_clk_set_defaults) from (platform_drv_probe+0x18/0xb0) To fix that bug, we first check if the return of the clk_hw_get_parent_by_index is non zero. If it is zero we skip that clock parent. The BUG report could be found here: https://lkml.org/lkml/2018/2/10/198 Fixes: 04940631b8d2 ("rtc: ac100: Add clk output support") Signed-off-by: Philipp Rossak <embed3d@gmail.com> --- Changes in v4: * add more information to the comment Changes in v3: * add information when the bug appeared * make the comment more clear Changes in v2: * add tag Fixes: ... to commit message * add comment to if statement why we are doing this check drivers/rtc/rtc-ac100.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-)