diff mbox

dts: sunxi: Add eMMC for NanoPi M1 Plus

Message ID 20180302213852.64588-1-manu@freebsd.org (mailing list archive)
State New, archived
Headers show

Commit Message

Emmanuel Vadot March 2, 2018, 9:38 p.m. UTC 
The NanoPi-M1-Plus have a 8GB eMMC, add a node for it.
This eMMC is always powered with 3.3V.

Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
---
 arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Maxime Ripard March 7, 2018, 8:32 a.m. UTC | #1 
On Fri, Mar 02, 2018 at 10:38:52PM +0100, Emmanuel Vadot wrote:
> The NanoPi-M1-Plus have a 8GB eMMC, add a node for it.
> This eMMC is always powered with 3.3V.
> 
> Signed-off-by: Emmanuel Vadot <manu@freebsd.org>

Applied, thanks!
Maxime
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
index a6e61915d648..0ca988e8c72f 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
@@ -119,6 +119,16 @@ 
 	};
 };
 
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bits_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
 &ohci1 {
 	status = "okay";
 };