@@ -274,6 +274,60 @@
};
};
+ i2c0: i2c@1400 {
+ compatible = "snps,designware-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1400 0x100>;
+ interrupts = <16>;
+ clocks = <&chip_clk CLKID_CFG>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@1800 {
+ compatible = "snps,designware-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1800 0x100>;
+ interrupts = <17>;
+ clocks = <&chip_clk CLKID_CFG>;
+ status = "disabled";
+ };
+
+ spi0: spi@1c00 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1c00 0x100>;
+ interrupts = <4>;
+ clocks = <&chip_clk CLKID_CFG>;
+ status = "disabled";
+ };
+
+ wdt4: watchdog@2000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x2000 0x100>;
+ clocks = <&chip_clk CLKID_CFG>;
+ interrupts = <5>;
+ status = "disabled";
+ };
+
+ wdt5: watchdog@2400 {
+ compatible = "snps,dw-wdt";
+ reg = <0x2400 0x100>;
+ clocks = <&chip_clk CLKID_CFG>;
+ interrupts = <6>;
+ status = "disabled";
+ };
+
+ wdt6: watchdog@2800 {
+ compatible = "snps,dw-wdt";
+ reg = <0x2800 0x100>;
+ clocks = <&chip_clk CLKID_CFG>;
+ interrupts = <7>;
+ status = "disabled";
+ };
+
timer0: timer@2c00 {
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
@@ -455,6 +509,36 @@
};
};
+ spi1: spi@6000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <5>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@7000 {
+ compatible = "snps,designware-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7000 0x100>;
+ interrupts = <6>;
+ clocks = <&refclk>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@8000 {
+ compatible = "snps,designware-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x8000 0x100>;
+ interrupts = <7>;
+ clocks = <&refclk>;
+ status = "disabled";
+ };
+
sm_gpio0: gpio@c000 {
compatible = "snps,dw-apb-gpio";
reg = <0xc000 0x400>;
@@ -492,6 +576,16 @@
status = "disabled";
};
+ uart2: serial@b000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xb000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ interrupts = <10>;
+ clocks = <&refclk>;
+ status = "disabled";
+ };
+
sysctrl: system-controller@d000 {
compatible = "simple-mfd", "syscon";
reg = <0xd000 0x100>;
This adds most of the remaining Designware IP cores under APB trees in the interest of documenting assignment of interrupts and memory ranges. Signed-off-by: Alexander Monakov <amonakov@ispras.ru> --- arch/arm/boot/dts/berlin2cd.dtsi | 94 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+)