diff mbox

[v2] arm: dts: hummingboard: convert onboard audio to simple-audio-card

Message ID 20180319201414.29481-1-mporter@konsulko.com (mailing list archive)
State New, archived
Headers show

Commit Message

Matt Porter March 19, 2018, 8:14 p.m. UTC 
The HB onboard audio currently makes use of the imx-audio-sgtl5000
binding. This binding does not support auxiliary audio devices such
as external amplifiers. The simple-audio-card binding does support
this property which allows systems incorporating the HB to add an
auxiliary device that's attached to the HB audio jack with an
overlay. Convert the HB onboard audio to use simple-audio-card for
this additional flexibility.

Signed-off-by: Matt Porter <mporter@konsulko.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
---
v2:
    - also convert HB1 to simple-audio-card
    - retain original card name as "On-board Codec" [case change]

 arch/arm/boot/dts/imx6qdl-hummingboard.dtsi  | 52 ++++++++++++++++++++++------
 arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi | 48 ++++++++++++++++++++-----
 2 files changed, 82 insertions(+), 18 deletions(-)

Comments

Shawn Guo April 16, 2018, 7:29 a.m. UTC | #1 
On Mon, Mar 19, 2018 at 04:14:13PM -0400, Matt Porter wrote:
> The HB onboard audio currently makes use of the imx-audio-sgtl5000
> binding. This binding does not support auxiliary audio devices such
> as external amplifiers. The simple-audio-card binding does support
> this property which allows systems incorporating the HB to add an
> auxiliary device that's attached to the HB audio jack with an
> overlay. Convert the HB onboard audio to use simple-audio-card for
> this additional flexibility.
> 
> Signed-off-by: Matt Porter <mporter@konsulko.com>
> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

Applied, thanks.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 92583238ca4a..2f6e51fbd4bc 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -38,6 +38,7 @@ 
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
+#include <dt-bindings/sound/fsl-imx-audmux.h>
 
 / {
 	chosen {
@@ -105,17 +106,27 @@ 
 		vin-supply = <&v_5v0>;
 	};
 
-	sound-sgtl5000 {
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
+	audio: sound-sgtl5000 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board Codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Microphone", "Headphone Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Headphone Jack",
+			"Headphone Jack", "Mic Bias",
 			"Headphone Jack", "HP_OUT";
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "On-board Codec";
-		mux-ext-port = <5>;
-		mux-int-port = <1>;
-		ssi-controller = <&ssi1>;
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
 	};
 
 	sound-spdif {
@@ -129,6 +140,26 @@ 
 
 &audmux {
 	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
 };
 
 &can1 {
@@ -161,6 +192,7 @@ 
 		compatible = "fsl,sgtl5000";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>;
+		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		VDDA-supply = <&v_3v2>;
 		VDDIO-supply = <&v_3v2>;
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
index dffbc92e0023..47d780fafd87 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
@@ -38,6 +38,7 @@ 
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
+#include <dt-bindings/sound/fsl-imx-audmux.h>
 
 / {
 	chosen {
@@ -145,22 +146,52 @@ 
 		vin-supply = <&v_5v0>;
 	};
 
-	sound-sgtl5000 {
-		audio-codec = <&sgtl5000>;
-		audio-routing =
+	audio: sound-sgtl5000 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board Codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
 			"MIC_IN", "Mic Jack",
 			"Mic Jack", "Mic Bias",
 			"Headphone Jack", "HP_OUT";
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "On-board Codec";
-		mux-ext-port = <5>;
-		mux-int-port = <1>;
-		ssi-controller = <&ssi1>;
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
 	};
 };
 
 &audmux {
 	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
 };
 
 &ecspi2 {
@@ -193,6 +224,7 @@ 
 		compatible = "fsl,sgtl5000";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>;
+		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		VDDA-supply = <&v_3v2>;
 		VDDD-supply = <&vcc_1p8>;