diff mbox

[v4,7/8] remoteproc: da8xx: use the reset framework

Message ID 20180323130455.11470-8-brgl@bgdev.pl (mailing list archive)
State New, archived
Headers show

Commit Message

Bartosz Golaszewski March 23, 2018, 1:04 p.m. UTC 
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Switch to using the reset framework instead of handcoded reset routines
we used so far.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/remoteproc/da8xx_remoteproc.c | 32 +++++++++++++++++++++++++++-----
 1 file changed, 27 insertions(+), 5 deletions(-)

Comments

Suman Anna March 26, 2018, 9:28 p.m. UTC | #1 
Hi Bart,

On 03/23/2018 08:04 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> Switch to using the reset framework instead of handcoded reset routines
> we used so far.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  drivers/remoteproc/da8xx_remoteproc.c | 32 +++++++++++++++++++++++++++-----
>  1 file changed, 27 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
> index f134192922e0..3689473f8b49 100644
> --- a/drivers/remoteproc/da8xx_remoteproc.c
> +++ b/drivers/remoteproc/da8xx_remoteproc.c
> @@ -10,6 +10,7 @@
>  
>  #include <linux/bitops.h>
>  #include <linux/clk.h>
> +#include <linux/reset.h>
>  #include <linux/err.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> @@ -20,8 +21,6 @@
>  #include <linux/platform_device.h>
>  #include <linux/remoteproc.h>
>  
> -#include <mach/clock.h>   /* for davinci_clk_reset_assert/deassert() */
> -
>  #include "remoteproc_internal.h"
>  
>  static char *da8xx_fw_name;
> @@ -72,6 +71,7 @@ struct da8xx_rproc {
>  	struct da8xx_rproc_mem *mem;
>  	int num_mems;
>  	struct clk *dsp_clk;
> +	struct reset_control *dsp_reset;
>  	void (*ack_fxn)(struct irq_data *data);
>  	struct irq_data *irq_data;
>  	void __iomem *chipsig;
> @@ -138,6 +138,7 @@ static int da8xx_rproc_start(struct rproc *rproc)
>  	struct device *dev = rproc->dev.parent;
>  	struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
>  	struct clk *dsp_clk = drproc->dsp_clk;
> +	struct reset_control *dsp_reset = drproc->dsp_reset;
>  	int ret;
>  
>  	/* hw requires the start (boot) address be on 1KB boundary */
> @@ -155,7 +156,11 @@ static int da8xx_rproc_start(struct rproc *rproc)
>  		return ret;
>  	}
>  
> -	davinci_clk_reset_deassert(dsp_clk);
> +	ret = reset_control_deassert(dsp_reset);
> +	if (ret) {
> +		dev_err(dev, "reset_control_deassert() failed: %d\n", ret);
> +		return ret;

need to unwind the clk_prepare_enable() here.

> +	}
>  
>  	return 0;
>  }
> @@ -163,8 +168,15 @@ static int da8xx_rproc_start(struct rproc *rproc)
>  static int da8xx_rproc_stop(struct rproc *rproc)
>  {
>  	struct da8xx_rproc *drproc = rproc->priv;
> +	int ret;
> +
> +	ret = reset_control_assert(drproc->dsp_reset);
> +	if (ret) {
> +		dev_err(rproc->dev.parent,
> +			"reset_control_assert() failed: %d\n", ret);

prefer the trace statement to be on the same line as dev_err, you can
just keep the ret on the next line. I am fine with defining a local dev
variable as well (mirrors da8xx_rproc_start() to have the trace in a
single line).

> +		return ret;
> +	}
>  
> -	davinci_clk_reset_assert(drproc->dsp_clk);
>  	clk_disable_unprepare(drproc->dsp_clk);
>  
>  	return 0;
> @@ -232,6 +244,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
>  	struct resource *bootreg_res;
>  	struct resource *chipsig_res;
>  	struct clk *dsp_clk;
> +	struct reset_control *dsp_reset;
>  	void __iomem *chipsig;
>  	void __iomem *bootreg;
>  	int irq;
> @@ -268,6 +281,15 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
>  		return PTR_ERR(dsp_clk);
>  	}
>  
> +	dsp_reset = devm_reset_control_get_exclusive(dev, NULL);
> +	if (IS_ERR(dsp_reset)) {
> +		if (PTR_ERR(dsp_reset) != -EPROBE_DEFER)
> +			dev_err(dev, "unable to get reset control: %ld\n",
> +				PTR_ERR(dsp_reset));
> +
> +		return PTR_ERR(dsp_reset);
> +	}
> +
>  	if (dev->of_node) {
>  		ret = of_reserved_mem_device_init(dev);
>  		if (ret) {
> @@ -309,7 +331,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
>  	 * *not* in reset, but da8xx_rproc_start() needs the DSP to be
>  	 * held in reset at the time it is called.
>  	 */
> -	ret = davinci_clk_reset_assert(drproc->dsp_clk);
> +	ret = reset_control_assert(dsp_reset);
>  	if (ret)
>  		goto free_rproc;
>  

The reset API usage changes themselves look good otherwise.

regards
Suman
diff mbox

Patch

diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index f134192922e0..3689473f8b49 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -10,6 +10,7 @@ 
 
 #include <linux/bitops.h>
 #include <linux/clk.h>
+#include <linux/reset.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -20,8 +21,6 @@ 
 #include <linux/platform_device.h>
 #include <linux/remoteproc.h>
 
-#include <mach/clock.h>   /* for davinci_clk_reset_assert/deassert() */
-
 #include "remoteproc_internal.h"
 
 static char *da8xx_fw_name;
@@ -72,6 +71,7 @@  struct da8xx_rproc {
 	struct da8xx_rproc_mem *mem;
 	int num_mems;
 	struct clk *dsp_clk;
+	struct reset_control *dsp_reset;
 	void (*ack_fxn)(struct irq_data *data);
 	struct irq_data *irq_data;
 	void __iomem *chipsig;
@@ -138,6 +138,7 @@  static int da8xx_rproc_start(struct rproc *rproc)
 	struct device *dev = rproc->dev.parent;
 	struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
 	struct clk *dsp_clk = drproc->dsp_clk;
+	struct reset_control *dsp_reset = drproc->dsp_reset;
 	int ret;
 
 	/* hw requires the start (boot) address be on 1KB boundary */
@@ -155,7 +156,11 @@  static int da8xx_rproc_start(struct rproc *rproc)
 		return ret;
 	}
 
-	davinci_clk_reset_deassert(dsp_clk);
+	ret = reset_control_deassert(dsp_reset);
+	if (ret) {
+		dev_err(dev, "reset_control_deassert() failed: %d\n", ret);
+		return ret;
+	}
 
 	return 0;
 }
@@ -163,8 +168,15 @@  static int da8xx_rproc_start(struct rproc *rproc)
 static int da8xx_rproc_stop(struct rproc *rproc)
 {
 	struct da8xx_rproc *drproc = rproc->priv;
+	int ret;
+
+	ret = reset_control_assert(drproc->dsp_reset);
+	if (ret) {
+		dev_err(rproc->dev.parent,
+			"reset_control_assert() failed: %d\n", ret);
+		return ret;
+	}
 
-	davinci_clk_reset_assert(drproc->dsp_clk);
 	clk_disable_unprepare(drproc->dsp_clk);
 
 	return 0;
@@ -232,6 +244,7 @@  static int da8xx_rproc_probe(struct platform_device *pdev)
 	struct resource *bootreg_res;
 	struct resource *chipsig_res;
 	struct clk *dsp_clk;
+	struct reset_control *dsp_reset;
 	void __iomem *chipsig;
 	void __iomem *bootreg;
 	int irq;
@@ -268,6 +281,15 @@  static int da8xx_rproc_probe(struct platform_device *pdev)
 		return PTR_ERR(dsp_clk);
 	}
 
+	dsp_reset = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(dsp_reset)) {
+		if (PTR_ERR(dsp_reset) != -EPROBE_DEFER)
+			dev_err(dev, "unable to get reset control: %ld\n",
+				PTR_ERR(dsp_reset));
+
+		return PTR_ERR(dsp_reset);
+	}
+
 	if (dev->of_node) {
 		ret = of_reserved_mem_device_init(dev);
 		if (ret) {
@@ -309,7 +331,7 @@  static int da8xx_rproc_probe(struct platform_device *pdev)
 	 * *not* in reset, but da8xx_rproc_start() needs the DSP to be
 	 * held in reset at the time it is called.
 	 */
-	ret = davinci_clk_reset_assert(drproc->dsp_clk);
+	ret = reset_control_assert(dsp_reset);
 	if (ret)
 		goto free_rproc;