Message ID | 20180329043115.7132-4-wens@csie.org (mailing list archive) |
---|---|
State | Mainlined, archived |
Headers | show |
On Thu, 29 Mar 2018, Chen-Yu Tsai wrote: > When AXP806 support was added, POK was incorrectly expanded to PWROK. > However, the datasheet lists them as POK[LSNP], which is the same as > on the AXP288. Furthermore, the registers associated with POK functions > are the same as the PEK on the other AXP PMICs. This suggests that > "POK" means "Power On Key", much like "PEK" means "Power Enable Key", > instead of "Power OK". > > This patch changes the "PWROK" prefix to "POK" for these interrupts. > > Signed-off-by: Chen-Yu Tsai <wens@csie.org> > --- > drivers/mfd/axp20x.c | 8 ++++---- > include/linux/mfd/axp20x.h | 8 ++++---- > 2 files changed, 8 insertions(+), 8 deletions(-) Applied, thanks.
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index b3051e1c3ddc..9a2ef3d9b8f8 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -450,11 +450,11 @@ static const struct regmap_irq axp806_regmap_irqs[] = { INIT_REGMAP_IRQ(AXP806, DCDCC_V_LOW, 0, 5), INIT_REGMAP_IRQ(AXP806, DCDCD_V_LOW, 0, 6), INIT_REGMAP_IRQ(AXP806, DCDCE_V_LOW, 0, 7), - INIT_REGMAP_IRQ(AXP806, PWROK_LONG, 1, 0), - INIT_REGMAP_IRQ(AXP806, PWROK_SHORT, 1, 1), + INIT_REGMAP_IRQ(AXP806, POK_LONG, 1, 0), + INIT_REGMAP_IRQ(AXP806, POK_SHORT, 1, 1), INIT_REGMAP_IRQ(AXP806, WAKEUP, 1, 4), - INIT_REGMAP_IRQ(AXP806, PWROK_FALL, 1, 5), - INIT_REGMAP_IRQ(AXP806, PWROK_RISE, 1, 6), + INIT_REGMAP_IRQ(AXP806, POK_FALL, 1, 5), + INIT_REGMAP_IRQ(AXP806, POK_RISE, 1, 6), }; static const struct regmap_irq axp809_regmap_irqs[] = { diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index a2489363a998..517e60eecbcb 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -592,11 +592,11 @@ enum axp806_irqs { AXP806_IRQ_DCDCC_V_LOW, AXP806_IRQ_DCDCD_V_LOW, AXP806_IRQ_DCDCE_V_LOW, - AXP806_IRQ_PWROK_LONG, - AXP806_IRQ_PWROK_SHORT, + AXP806_IRQ_POK_LONG, + AXP806_IRQ_POK_SHORT, AXP806_IRQ_WAKEUP, - AXP806_IRQ_PWROK_FALL, - AXP806_IRQ_PWROK_RISE, + AXP806_IRQ_POK_FALL, + AXP806_IRQ_POK_RISE, }; enum axp809_irqs {
When AXP806 support was added, POK was incorrectly expanded to PWROK. However, the datasheet lists them as POK[LSNP], which is the same as on the AXP288. Furthermore, the registers associated with POK functions are the same as the PEK on the other AXP PMICs. This suggests that "POK" means "Power On Key", much like "PEK" means "Power Enable Key", instead of "Power OK". This patch changes the "PWROK" prefix to "POK" for these interrupts. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- drivers/mfd/axp20x.c | 8 ++++---- include/linux/mfd/axp20x.h | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-)