@@ -1,5 +1,3 @@
-CFLAGS_mc_smp.o += -march=armv7-a
-
obj-$(CONFIG_ARCH_SUNXI) += sunxi.o
-obj-$(CONFIG_ARCH_SUNXI_MC_SMP) += mc_smp.o
+obj-$(CONFIG_ARCH_SUNXI_MC_SMP) += mc_smp.o headsmp.o
obj-$(CONFIG_SMP) += platsmp.o
new file mode 100644
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Chen-Yu Tsai
+ * Copyright (c) 2018 Bootlin
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ * Mylène Josserand <mylene.josserand@bootlin.com>
+ *
+ * SMP support for sunxi based systems with Cortex A7/A15
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/cputype_def.h>
+
+ENTRY(sunxi_mc_smp_cluster_cache_enable)
+ .arch armv7-a
+ /*
+ * Enable cluster-level coherency, in preparation for turning on the MMU.
+ *
+ * Also enable regional clock gating and L2 data latency settings for
+ * Cortex-A15. These settings are from the vendor kernel.
+ */
+ mrc p15, 0, r1, c0, c0, 0
+ movw r2, #(ARM_CPU_PART_MASK & 0xffff)
+ movt r2, #(ARM_CPU_PART_MASK >> 16)
+ and r1, r1, r2
+ movw r2, #(ARM_CPU_PART_CORTEX_A15 & 0xffff)
+ movt r2, #(ARM_CPU_PART_CORTEX_A15 >> 16)
+ cmp r1, r2
+ bne not_a15
+
+ /* The following is Cortex-A15 specific */
+
+ /* ACTLR2: Enable CPU regional clock gates */
+ mrc p15, 1, r1, c15, c0, 4
+ orr r1, r1, #(0x1 << 31)
+ mcr p15, 1, r1, c15, c0, 4
+
+ /* L2ACTLR */
+ mrc p15, 1, r1, c15, c0, 0
+ /* Enable L2, GIC, and Timer regional clock gates */
+ orr r1, r1, #(0x1 << 26)
+ /* Disable clean/evict from being pushed to external */
+ orr r1, r1, #(0x1<<3)
+ mcr p15, 1, r1, c15, c0, 0
+
+ /* L2CTRL: L2 data RAM latency */
+ mrc p15, 1, r1, c9, c0, 2
+ bic r1, r1, #(0x7 << 0)
+ orr r1, r1, #(0x3 << 0)
+ mcr p15, 1, r1, c9, c0, 2
+
+ /* End of Cortex-A15 specific setup */
+ not_a15:
+
+ /* Get value of sunxi_mc_smp_first_comer */
+ adr r1, first
+ ldr r0, [r1]
+ ldr r0, [r1, r0]
+
+ /* Skip cci_enable_port_for_self if not first comer */
+ cmp r0, #0
+ bxeq lr
+ b cci_enable_port_for_self
+
+ .align 2
+ first: .word sunxi_mc_smp_first_comer - .
+ENDPROC(sunxi_mc_smp_cluster_cache_enable)
+
+ENTRY(sunxi_mc_smp_secondary_startup)
+ bl sunxi_mc_smp_cluster_cache_enable
+ b secondary_startup
+ENDPROC(sunxi_mc_smp_secondary_startup)
@@ -72,6 +72,8 @@ static void __iomem *cpucfg_base;
static void __iomem *prcm_base;
static void __iomem *sram_b_smp_base;
+extern void sunxi_mc_smp_secondary_startup(void);
+
static bool sunxi_core_is_cortex_a15(unsigned int core, unsigned int cluster)
{
struct device_node *node;
@@ -300,74 +302,7 @@ static void sunxi_cluster_cache_disable_without_axi(void)
}
static int sunxi_mc_smp_cpu_table[SUNXI_NR_CLUSTERS][SUNXI_CPUS_PER_CLUSTER];
-static int sunxi_mc_smp_first_comer;
-
-/*
- * Enable cluster-level coherency, in preparation for turning on the MMU.
- *
- * Also enable regional clock gating and L2 data latency settings for
- * Cortex-A15. These settings are from the vendor kernel.
- */
-static void __naked sunxi_mc_smp_cluster_cache_enable(void)
-{
- asm volatile (
- "mrc p15, 0, r1, c0, c0, 0\n"
- "movw r2, #" __stringify(ARM_CPU_PART_MASK & 0xffff) "\n"
- "movt r2, #" __stringify(ARM_CPU_PART_MASK >> 16) "\n"
- "and r1, r1, r2\n"
- "movw r2, #" __stringify(ARM_CPU_PART_CORTEX_A15 & 0xffff) "\n"
- "movt r2, #" __stringify(ARM_CPU_PART_CORTEX_A15 >> 16) "\n"
- "cmp r1, r2\n"
- "bne not_a15\n"
-
- /* The following is Cortex-A15 specific */
-
- /* ACTLR2: Enable CPU regional clock gates */
- "mrc p15, 1, r1, c15, c0, 4\n"
- "orr r1, r1, #(0x1<<31)\n"
- "mcr p15, 1, r1, c15, c0, 4\n"
-
- /* L2ACTLR */
- "mrc p15, 1, r1, c15, c0, 0\n"
- /* Enable L2, GIC, and Timer regional clock gates */
- "orr r1, r1, #(0x1<<26)\n"
- /* Disable clean/evict from being pushed to external */
- "orr r1, r1, #(0x1<<3)\n"
- "mcr p15, 1, r1, c15, c0, 0\n"
-
- /* L2CTRL: L2 data RAM latency */
- "mrc p15, 1, r1, c9, c0, 2\n"
- "bic r1, r1, #(0x7<<0)\n"
- "orr r1, r1, #(0x3<<0)\n"
- "mcr p15, 1, r1, c9, c0, 2\n"
-
- /* End of Cortex-A15 specific setup */
- "not_a15:\n"
-
- /* Get value of sunxi_mc_smp_first_comer */
- "adr r1, first\n"
- "ldr r0, [r1]\n"
- "ldr r0, [r1, r0]\n"
-
- /* Skip cci_enable_port_for_self if not first comer */
- "cmp r0, #0\n"
- "bxeq lr\n"
- "b cci_enable_port_for_self\n"
-
- ".align 2\n"
- "first: .word sunxi_mc_smp_first_comer - .\n"
- );
-}
-
-static void __naked sunxi_mc_smp_secondary_startup(void)
-{
- asm volatile(
- "bl sunxi_mc_smp_cluster_cache_enable\n"
- "b secondary_startup"
- /* Let compiler know about sunxi_mc_smp_cluster_cache_enable */
- :: "i" (sunxi_mc_smp_cluster_cache_enable)
- );
-}
+int sunxi_mc_smp_first_comer;
static DEFINE_SPINLOCK(boot_lock);
Move the assembly code for cluster cache enabling into an assembly file instead of having it directly in C code. Remove the CFLAGS because we are using the ARM directive "arch" instead. Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com> --- arch/arm/mach-sunxi/Makefile | 4 +-- arch/arm/mach-sunxi/headsmp.S | 75 +++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-sunxi/mc_smp.c | 71 ++-------------------------------------- 3 files changed, 79 insertions(+), 71 deletions(-) create mode 100644 arch/arm/mach-sunxi/headsmp.S