diff mbox

[v3] ARM: dts: tpc: Device tree description of the iMX6Q TPC board

Message ID 20180405070939.22245-1-lukma@denx.de (mailing list archive)
State New, archived
Headers show

Commit Message

Lukasz Majewski April 5, 2018, 7:09 a.m. UTC
This commit adds device tree description of Kieback & Peter GmbH
iMX6Q TPC board.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

---
Changes for v3:
- Provide proper compatible for RTC DTS node
- Remove wrong comment style for beeper
- Add proper SPDX entries for DTS files
- Add vendor prefix to a separate patch

Changes for v2:
- SPDX license identifiers used
- Separate regulators
- Proper beeper driver
- Use of the lcd panel (with compatible) instead of timings provided in
  device tree
- Add IRQ types (like IRQ_TYPE_EDGE_FALLING) and GPIO active levels (like
  GPIO_ACTIVE_HIGH)
- Remove not needed nodes
- Make W=1 dtbs compilation with no errors
---
 arch/arm/boot/dts/Makefile         |   1 +
 arch/arm/boot/dts/imx6q-kp-tpc.dts |  22 ++
 arch/arm/boot/dts/imx6q-kp.dtsi    | 459 +++++++++++++++++++++++++++++++++++++
 3 files changed, 482 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-kp-tpc.dts
 create mode 100644 arch/arm/boot/dts/imx6q-kp.dtsi

Comments

Fabio Estevam April 5, 2018, 2:16 p.m. UTC | #1
Hi Lukasz,

On Thu, Apr 5, 2018 at 4:09 AM, Lukasz Majewski <lukma@denx.de> wrote:

> +       reg_audio: regulator-audio {
> +               compatible = "regulator-fixed";
> +               regulator-name = "sgtl5000-supply";
> +               gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
> +               enable-active-high;
> +               regulator-always-on;
> +       };

sgtl5000 has 3 supplies: VDDD, VDDIO, VDDA.

Which supply does this reg_audio supply to the chip?

Can't you use any of the existing sgtl5000 regulator bindings to
describe this supply?
Lukasz Majewski April 5, 2018, 2:42 p.m. UTC | #2
Hi Fabio,

> Hi Lukasz,
> 
> On Thu, Apr 5, 2018 at 4:09 AM, Lukasz Majewski <lukma@denx.de> wrote:
> 
> > +       reg_audio: regulator-audio {
> > +               compatible = "regulator-fixed";
> > +               regulator-name = "sgtl5000-supply";
> > +               gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
> > +               enable-active-high;
> > +               regulator-always-on;
> > +       };  
> 
> sgtl5000 has 3 supplies: VDDD, VDDIO, VDDA.
> 
> Which supply does this reg_audio supply to the chip?

It supplies none of the above. This regulator is needed to enable
amplifier output placed after sgtl5000 device.

> 
> Can't you use any of the existing sgtl5000 regulator bindings to
> describe this supply?

As stated before - this supply enables the output of the amplifier.


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Fabio Estevam April 5, 2018, 3:02 p.m. UTC | #3
On Thu, Apr 5, 2018 at 4:09 AM, Lukasz Majewski <lukma@denx.de> wrote:
> This commit adds device tree description of Kieback & Peter GmbH
> iMX6Q TPC board.
>
> Signed-off-by: Lukasz Majewski <lukma@denx.de>

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index ade7a38543dc..c148c4cf28f2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -459,6 +459,7 @@  dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-icore-ofcap10.dtb \
 	imx6q-icore-ofcap12.dtb \
 	imx6q-icore-rqs.dtb \
+	imx6q-kp-tpc.dtb \
 	imx6q-marsboard.dtb \
 	imx6q-mccmon6.dtb \
 	imx6q-nitrogen6x.dtb \
diff --git a/arch/arm/boot/dts/imx6q-kp-tpc.dts b/arch/arm/boot/dts/imx6q-kp-tpc.dts
new file mode 100644
index 000000000000..c3dea0ec54ac
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-kp-tpc.dts
@@ -0,0 +1,22 @@ 
+//SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+
+#include "imx6q-kp.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Qwuad K+P TPC Board";
+	compatible = "kiebackpeter,imx6q-tpc", "fsl,imx6q";
+
+	memory@10000000 {
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/imx6q-kp.dtsi
new file mode 100644
index 000000000000..4dc07dbba3a0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-kp.dtsi
@@ -0,0 +1,459 @@ 
+//SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
+				      10  11  12  13  14  15  16  17  18  19
+				      20  21  22  23  24  25  26  27  28  29
+				      30  31  32  33  34  35  36  37  38  39
+				      40  41  42  43  44  45  46  47  48  49
+				      50  51  52  53  54  55  56  57  58  59
+				      60  61  62  63  64  65  66  67  68  69
+				      70  71  72  73  74  75  76  77  78  79
+				      80  81  82  83  84  85  86  87  88  89
+				      90  91  92  93  94  95  96  97  98  99
+				     100 101 102 103 104 105 106 107 108 109
+				     110 111 112 113 114 115 116 117 118 119
+				     120 121 122 123 124 125 126 127 128 129
+				     130 131 132 133 134 135 136 137 138 139
+				     140 141 142 143 144 145 146 147 148 149
+				     150 151 152 153 154 155 156 157 158 159
+				     160 161 162 163 164 165 166 167 168 169
+				     170 171 172 173 174 175 176 177 178 179
+				     180 181 182 183 184 185 186 187 188 189
+				     190 191 192 193 194 195 196 197 198 199
+				     200 201 202 203 204 205 206 207 208 209
+				     210 211 212 213 214 215 216 217 218 219
+				     220 221 222 223 224 225 226 227 228 229
+				     230 231 232 233 234 235 236 237 238 239
+				     240 241 242 243 244 245 246 247 248 249
+				     250 251 252 253 254 255>;
+		default-brightness-level = <250>;
+		status = "okay";
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm2 0 500000>;
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "auo,g070vvn01";
+		backlight = <&backlight_lcd>;
+		bus-format-override = "rgb565";
+		power-supply = <&reg_display>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "led1";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		red {
+			label = "led0";
+			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "sgtl5000-supply";
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_display: regulator-display {
+		compatible = "regulator-fixed";
+		regulator-name = "display-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb_h1_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6q-sgtl5000-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+			IMX_AUDMUX_V2_PTCR_TCSEL(2) |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	aud3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	goodix_ts@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	rtc: ds1307@32 {
+		compatible = "dallas,ds1307";
+		reg = <0x32>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS	0x130b0
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31   0x1b0b0
+			/* sgtl5000 sys_mclk clock routed to CLKO1 */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC	0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0	0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1	0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2	0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3	0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC	0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0	0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1	0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2	0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3	0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+		>;
+	};
+
+	pinctrl_flexcan1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX        0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX        0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX        0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX        0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		 >;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B         0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_RTS_B         0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "okay";
+};