diff mbox

[v6] ARM: dts: tpc: Device tree description of the iMX6Q TPC board

Message ID 20180419143240.3717-1-lukma@denx.de (mailing list archive)
State New, archived
Headers show

Commit Message

Lukasz Majewski April 19, 2018, 2:32 p.m. UTC 
This commit adds device tree description of Kieback & Peter GmbH
iMX6Q TPC board.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

---
Changes for v6:
- Add space between // and SPDX
- Replace 'disp0' with 'display'
- Replace 'rtc: ds1307@32' with 'ds1307: rtc@32'
- Replace 'codec: audio-codec@a' with 'sgtl5000: audio-codec@a'
- Move &can[12] nodes extension to proper position to be alphabetically sorted

Changes for v5:
- Use 'interpolation-steps' to fill the brightness level table
- Remove not needed status = "okay" properties
- Replace goodix_ts -> touchscreen
- Replace sgtl5000 -> audio-codec

This patch depends on PWM backlight intepolation work:
https://patchwork.kernel.org/patch/10330775/
https://patchwork.kernel.org/patch/10330777/

Changes for v4:
- Remove not needed bus-format-override = "rgb565";
  property

Changes for v3:
- Provide proper compatible for RTC DTS node
- Remove wrong comment style for beeper
- Add proper SPDX entries for DTS files
- Add vendor prefix to a separate patch

Changes for v2:
- SPDX license identifiers used
- Separate regulators
- Proper beeper driver
- Use of the lcd panel (with compatible) instead of timings provided in
  device tree
- Add IRQ types (like IRQ_TYPE_EDGE_FALLING) and GPIO active levels (like
  GPIO_ACTIVE_HIGH)
- Remove not needed nodes
- Make W=1 dtbs compilation with no errors
---
 arch/arm/boot/dts/Makefile         |   1 +
 arch/arm/boot/dts/imx6q-kp-tpc.dts |  22 ++
 arch/arm/boot/dts/imx6q-kp.dtsi    | 432 +++++++++++++++++++++++++++++++++++++
 3 files changed, 455 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-kp-tpc.dts
 create mode 100644 arch/arm/boot/dts/imx6q-kp.dtsi

Comments

Rob Herring April 20, 2018, 1:06 a.m. UTC | #1 
On Thu, Apr 19, 2018 at 9:32 AM, Lukasz Majewski <lukma@denx.de> wrote:
> This commit adds device tree description of Kieback & Peter GmbH
> iMX6Q TPC board.
>
> Signed-off-by: Lukasz Majewski <lukma@denx.de>
> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
>
> ---
> Changes for v6:
> - Add space between // and SPDX
> - Replace 'disp0' with 'display'
> - Replace 'rtc: ds1307@32' with 'ds1307: rtc@32'
> - Replace 'codec: audio-codec@a' with 'sgtl5000: audio-codec@a'
> - Move &can[12] nodes extension to proper position to be alphabetically sorted
>
> Changes for v5:
> - Use 'interpolation-steps' to fill the brightness level table
> - Remove not needed status = "okay" properties
> - Replace goodix_ts -> touchscreen
> - Replace sgtl5000 -> audio-codec
>
> This patch depends on PWM backlight intepolation work:
> https://patchwork.kernel.org/patch/10330775/
> https://patchwork.kernel.org/patch/10330777/
>
> Changes for v4:
> - Remove not needed bus-format-override = "rgb565";
>   property
>
> Changes for v3:
> - Provide proper compatible for RTC DTS node
> - Remove wrong comment style for beeper
> - Add proper SPDX entries for DTS files
> - Add vendor prefix to a separate patch
>
> Changes for v2:
> - SPDX license identifiers used
> - Separate regulators
> - Proper beeper driver
> - Use of the lcd panel (with compatible) instead of timings provided in
>   device tree
> - Add IRQ types (like IRQ_TYPE_EDGE_FALLING) and GPIO active levels (like
>   GPIO_ACTIVE_HIGH)
> - Remove not needed nodes
> - Make W=1 dtbs compilation with no errors
> ---
>  arch/arm/boot/dts/Makefile         |   1 +
>  arch/arm/boot/dts/imx6q-kp-tpc.dts |  22 ++
>  arch/arm/boot/dts/imx6q-kp.dtsi    | 432 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 455 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6q-kp-tpc.dts
>  create mode 100644 arch/arm/boot/dts/imx6q-kp.dtsi

Reviewed-by: Rob Herring <robh@kernel.org>
Shawn Guo April 23, 2018, 8:48 a.m. UTC | #2 
On Thu, Apr 19, 2018 at 04:32:40PM +0200, Lukasz Majewski wrote:
> This commit adds device tree description of Kieback & Peter GmbH
> iMX6Q TPC board.
> 
> Signed-off-by: Lukasz Majewski <lukma@denx.de>
> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

Applied, thanks.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index ade7a38543dc..c148c4cf28f2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -459,6 +459,7 @@  dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-icore-ofcap10.dtb \
 	imx6q-icore-ofcap12.dtb \
 	imx6q-icore-rqs.dtb \
+	imx6q-kp-tpc.dtb \
 	imx6q-marsboard.dtb \
 	imx6q-mccmon6.dtb \
 	imx6q-nitrogen6x.dtb \
diff --git a/arch/arm/boot/dts/imx6q-kp-tpc.dts b/arch/arm/boot/dts/imx6q-kp-tpc.dts
new file mode 100644
index 000000000000..302d8d06e4cc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-kp-tpc.dts
@@ -0,0 +1,22 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+
+#include "imx6q-kp.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Qwuad K+P TPC Board";
+	compatible = "kiebackpeter,imx6q-tpc", "fsl,imx6q";
+
+	memory@10000000 {
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/imx6q-kp.dtsi
new file mode 100644
index 000000000000..24c8169baf44
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-kp.dtsi
@@ -0,0 +1,432 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <250>;
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm2 0 500000>;
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "auo,g070vvn01";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_display>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "led1";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		red {
+			label = "led0";
+			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "sgtl5000-supply";
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_display: regulator-display {
+		compatible = "regulator-fixed";
+		regulator-name = "display-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb_h1_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6q-sgtl5000-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+			IMX_AUDMUX_V2_PTCR_TCSEL(2) |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	aud3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	ds1307: rtc@32 {
+		compatible = "dallas,ds1307";
+		reg = <0x32>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS	0x130b0
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31   0x1b0b0
+			/* sgtl5000 sys_mclk clock routed to CLKO1 */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC	0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0	0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1	0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2	0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3	0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC	0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0	0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1	0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2	0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3	0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+		>;
+	};
+
+	pinctrl_flexcan1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX        0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX        0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX        0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX        0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		 >;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B         0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_RTS_B         0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "okay";
+};