Message ID | 20180508135930.5768-1-robh@kernel.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Tue, 8 May 2018 08:59:25 -0500 Rob Herring <robh@kernel.org> wrote: > Addresses for graph ports and endpoints are not necessary when > there's only a single child. Fix the following warnings removing > unnecessary addresses on OF graph nodes: > > Warning (graph_child_address): /ahb/apb/hlcdc@f0030000/hlcdc-display-controller: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary > Warning (graph_child_address): /ahb/apb/hlcdc@f0030000/hlcdc-display-controller/port@0: graph node has single child node 'endpoint', #address-cells/#size-cells are not necessary > Warning (graph_child_address): /ahb/apb/isi@f0034000/port: graph node has single child node 'endpoint', #address-cells/#size-cells are not necessary > Warning (graph_child_address): /panel/port@0: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary Unfortunately that's not going to work, because the driver calls drm_of_find_panel_or_bridge() with a positive port and endpoint, not -1. While we could switch port arg from 0 to -1, that's not that simple for the endpoint arg, because we don't know in advance how many devices will be connected to the RGB/DPI port. [1]https://elixir.bootlin.com/linux/v4.17-rc3/source/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c#L41 > > Cc: Nicolas Ferre <nicolas.ferre@microchip.com> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Signed-off-by: Rob Herring <robh@kernel.org> > --- > arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts | 15 ++++----------- > arch/arm/boot/dts/at91sam9g45.dtsi | 2 -- > arch/arm/boot/dts/at91sam9n12.dtsi | 8 +------- > arch/arm/boot/dts/at91sam9n12ek.dts | 14 ++++---------- > arch/arm/boot/dts/at91sam9x5_lcd.dtsi | 7 +------ > arch/arm/boot/dts/at91sam9x5dm.dtsi | 13 ++++--------- > arch/arm/boot/dts/sama5d3.dtsi | 2 -- > arch/arm/boot/dts/sama5d3_lcd.dtsi | 8 +------- > arch/arm/boot/dts/sama5d4.dtsi | 8 +------- > 9 files changed, 16 insertions(+), 61 deletions(-) > > diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts > index fe05aaa7ac87..72c3b077fb46 100644 > --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts > +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts > @@ -49,9 +49,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; > > - port@0 { > - hlcdc_panel_output: endpoint@0 { > - reg = <0>; > + port { > + hlcdc_panel_output: endpoint { > remote-endpoint = <&panel_input>; > }; > }; > @@ -144,16 +143,10 @@ > /* Actually Ampire 800480R2 */ > compatible = "foxlink,fl500wvr00-a0t", "simple-panel"; > backlight = <&backlight>; > - #address-cells = <1>; > - #size-cells = <0>; > status = "okay"; > > - port@0 { > - #address-cells = <1>; > - #size-cells = <0>; > - > - panel_input: endpoint@0 { > - reg = <0>; > + port { > + panel_input: endpoint { > remote-endpoint = <&hlcdc_panel_output>; > }; > }; > diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi > index 1ee25a475be8..36729e3f2899 100644 > --- a/arch/arm/boot/dts/at91sam9g45.dtsi > +++ b/arch/arm/boot/dts/at91sam9g45.dtsi > @@ -1114,8 +1114,6 @@ > clock-names = "isi_clk"; > status = "disabled"; > port { > - #address-cells = <1>; > - #size-cells = <0>; > }; > }; > > diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi > index 37cb81f457b5..a071fccb729b 100644 > --- a/arch/arm/boot/dts/at91sam9n12.dtsi > +++ b/arch/arm/boot/dts/at91sam9n12.dtsi > @@ -475,13 +475,7 @@ > > hlcdc-display-controller { > compatible = "atmel,hlcdc-display-controller"; > - #address-cells = <1>; > - #size-cells = <0>; > - > - port@0 { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <0>; > + port { > }; > }; > > diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts > index c43095c5cb5c..eb0c1e11fa4d 100644 > --- a/arch/arm/boot/dts/at91sam9n12ek.dts > +++ b/arch/arm/boot/dts/at91sam9n12ek.dts > @@ -134,9 +134,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; > > - port@0 { > - hlcdc_panel_output: endpoint@0 { > - reg = <0>; > + port { > + hlcdc_panel_output: endpoint { > remote-endpoint = <&panel_input>; > }; > }; > @@ -246,13 +245,8 @@ > #size-cells = <0>; > status = "okay"; > > - port@0 { > - reg = <0>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - panel_input: endpoint@0 { > - reg = <0>; > + port { > + panel_input: endpoint { > remote-endpoint = <&hlcdc_panel_output>; > }; > }; > diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi > index 1629db9dd563..e243dff67a67 100644 > --- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi > +++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi > @@ -23,13 +23,8 @@ > > hlcdc-display-controller { > compatible = "atmel,hlcdc-display-controller"; > - #address-cells = <1>; > - #size-cells = <0>; > > - port@0 { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <0>; > + port { > }; > }; > > diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi > index 34c089fe0bc0..5aea8fd09ad6 100644 > --- a/arch/arm/boot/dts/at91sam9x5dm.dtsi > +++ b/arch/arm/boot/dts/at91sam9x5dm.dtsi > @@ -29,9 +29,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; > > - port@0 { > - hlcdc_panel_output: endpoint@0 { > - reg = <0>; > + port { > + hlcdc_panel_output: endpoint { > remote-endpoint = <&panel_input>; > }; > }; > @@ -80,12 +79,8 @@ > #size-cells = <0>; > status = "disabled"; > > - port@0 { > - #address-cells = <1>; > - #size-cells = <0>; > - > - panel_input: endpoint@0 { > - reg = <0>; > + port { > + panel_input: endpoint { > remote-endpoint = <&hlcdc_panel_output>; > }; > }; > diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi > index eae5e1ee9cd8..2c51042e1f6b 100644 > --- a/arch/arm/boot/dts/sama5d3.dtsi > +++ b/arch/arm/boot/dts/sama5d3.dtsi > @@ -239,8 +239,6 @@ > clock-names = "isi_clk"; > status = "disabled"; > port { > - #address-cells = <1>; > - #size-cells = <0>; > }; > }; > > diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi > index be7cfefc6c31..2d042d7ec531 100644 > --- a/arch/arm/boot/dts/sama5d3_lcd.dtsi > +++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi > @@ -23,13 +23,7 @@ > > hlcdc-display-controller { > compatible = "atmel,hlcdc-display-controller"; > - #address-cells = <1>; > - #size-cells = <0>; > - > - port@0 { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <0>; > + port { > }; > }; > > diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi > index 0cf9beddd556..90d7b64915ec 100644 > --- a/arch/arm/boot/dts/sama5d4.dtsi > +++ b/arch/arm/boot/dts/sama5d4.dtsi > @@ -333,13 +333,7 @@ > > hlcdc-display-controller { > compatible = "atmel,hlcdc-display-controller"; > - #address-cells = <1>; > - #size-cells = <0>; > - > - port@0 { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <0>; > + port { > }; > }; >
On Tue, May 8, 2018 at 3:18 PM, Boris Brezillon <boris.brezillon@bootlin.com> wrote: > On Tue, 8 May 2018 08:59:25 -0500 > Rob Herring <robh@kernel.org> wrote: > >> Addresses for graph ports and endpoints are not necessary when >> there's only a single child. Fix the following warnings removing >> unnecessary addresses on OF graph nodes: >> >> Warning (graph_child_address): /ahb/apb/hlcdc@f0030000/hlcdc-display-controller: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary >> Warning (graph_child_address): /ahb/apb/hlcdc@f0030000/hlcdc-display-controller/port@0: graph node has single child node 'endpoint', #address-cells/#size-cells are not necessary >> Warning (graph_child_address): /ahb/apb/isi@f0034000/port: graph node has single child node 'endpoint', #address-cells/#size-cells are not necessary >> Warning (graph_child_address): /panel/port@0: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary > > Unfortunately that's not going to work, because the driver calls > drm_of_find_panel_or_bridge() with a positive port and endpoint, > not -1. While we could switch port arg from 0 to -1, that's not that > simple for the endpoint arg, because we don't know in advance how many > devices will be connected to the RGB/DPI port. 0 and -1 are treated the same way in the graph code. Ports should be separate data streams. Can the hlcdc have more than 1 data stream (I think I checked that)? If not, then more than 1 port will never be needed. Likewise, a panel is pretty much never going to have 2 ports (or endpoints). The hlcdc could have more than 1 endpoint if you have multiple connections, but that's not what's defined. If you have an 'endpoint' node, then having #address-cells/#size-cells is wrong without a reg prop and unit-address. Rob
On Tue, 8 May 2018 15:41:51 -0500 Rob Herring <robh@kernel.org> wrote: > On Tue, May 8, 2018 at 3:18 PM, Boris Brezillon > <boris.brezillon@bootlin.com> wrote: > > On Tue, 8 May 2018 08:59:25 -0500 > > Rob Herring <robh@kernel.org> wrote: > > > >> Addresses for graph ports and endpoints are not necessary when > >> there's only a single child. Fix the following warnings removing > >> unnecessary addresses on OF graph nodes: > >> > >> Warning (graph_child_address): /ahb/apb/hlcdc@f0030000/hlcdc-display-controller: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary > >> Warning (graph_child_address): /ahb/apb/hlcdc@f0030000/hlcdc-display-controller/port@0: graph node has single child node 'endpoint', #address-cells/#size-cells are not necessary > >> Warning (graph_child_address): /ahb/apb/isi@f0034000/port: graph node has single child node 'endpoint', #address-cells/#size-cells are not necessary > >> Warning (graph_child_address): /panel/port@0: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary > > > > Unfortunately that's not going to work, because the driver calls > > drm_of_find_panel_or_bridge() with a positive port and endpoint, > > not -1. While we could switch port arg from 0 to -1, that's not that > > simple for the endpoint arg, because we don't know in advance how many > > devices will be connected to the RGB/DPI port. > > 0 and -1 are treated the same way in the graph code. Oh, you're right, I didn't check the of_graph_parse_endpoint() code. > > Ports should be separate data streams. Can the hlcdc have more than 1 > data stream (I think I checked that)? Yes, there's only one port. > If not, then more than 1 port > will never be needed. Likewise, a panel is pretty much never going to > have 2 ports (or endpoints). True. > The hlcdc could have more than 1 endpoint > if you have multiple connections, but that's not what's defined. If > you have an 'endpoint' node, then having #address-cells/#size-cells is > wrong without a reg prop and unit-address. The reg and unit-address were present in the endpoint nodes (maybe not in all dts though). AFAICT, the problem is more that the port only has a single child, and dtc complains that such nodes should not have a reg prop.
On Tue, 8 May 2018 08:59:25 -0500 Rob Herring <robh@kernel.org> wrote: > Addresses for graph ports and endpoints are not necessary when > there's only a single child. Fix the following warnings removing > unnecessary addresses on OF graph nodes: > > Warning (graph_child_address): /ahb/apb/hlcdc@f0030000/hlcdc-display-controller: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary > Warning (graph_child_address): /ahb/apb/hlcdc@f0030000/hlcdc-display-controller/port@0: graph node has single child node 'endpoint', #address-cells/#size-cells are not necessary > Warning (graph_child_address): /ahb/apb/isi@f0034000/port: graph node has single child node 'endpoint', #address-cells/#size-cells are not necessary > Warning (graph_child_address): /panel/port@0: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary > > Cc: Nicolas Ferre <nicolas.ferre@microchip.com> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Signed-off-by: Rob Herring <robh@kernel.org> > --- > arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts | 15 ++++----------- > arch/arm/boot/dts/at91sam9g45.dtsi | 2 -- > arch/arm/boot/dts/at91sam9n12.dtsi | 8 +------- > arch/arm/boot/dts/at91sam9n12ek.dts | 14 ++++---------- > arch/arm/boot/dts/at91sam9x5_lcd.dtsi | 7 +------ > arch/arm/boot/dts/at91sam9x5dm.dtsi | 13 ++++--------- > arch/arm/boot/dts/sama5d3.dtsi | 2 -- > arch/arm/boot/dts/sama5d3_lcd.dtsi | 8 +------- > arch/arm/boot/dts/sama5d4.dtsi | 8 +------- For the hlcdc changes Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> I'll update the DT bindinds doc accordingly. Thanks, Boris > 9 files changed, 16 insertions(+), 61 deletions(-) > > diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts > index fe05aaa7ac87..72c3b077fb46 100644 > --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts > +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts > @@ -49,9 +49,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; > > - port@0 { > - hlcdc_panel_output: endpoint@0 { > - reg = <0>; > + port { > + hlcdc_panel_output: endpoint { > remote-endpoint = <&panel_input>; > }; > }; > @@ -144,16 +143,10 @@ > /* Actually Ampire 800480R2 */ > compatible = "foxlink,fl500wvr00-a0t", "simple-panel"; > backlight = <&backlight>; > - #address-cells = <1>; > - #size-cells = <0>; > status = "okay"; > > - port@0 { > - #address-cells = <1>; > - #size-cells = <0>; > - > - panel_input: endpoint@0 { > - reg = <0>; > + port { > + panel_input: endpoint { > remote-endpoint = <&hlcdc_panel_output>; > }; > }; > diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi > index 1ee25a475be8..36729e3f2899 100644 > --- a/arch/arm/boot/dts/at91sam9g45.dtsi > +++ b/arch/arm/boot/dts/at91sam9g45.dtsi > @@ -1114,8 +1114,6 @@ > clock-names = "isi_clk"; > status = "disabled"; > port { > - #address-cells = <1>; > - #size-cells = <0>; > }; > }; > > diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi > index 37cb81f457b5..a071fccb729b 100644 > --- a/arch/arm/boot/dts/at91sam9n12.dtsi > +++ b/arch/arm/boot/dts/at91sam9n12.dtsi > @@ -475,13 +475,7 @@ > > hlcdc-display-controller { > compatible = "atmel,hlcdc-display-controller"; > - #address-cells = <1>; > - #size-cells = <0>; > - > - port@0 { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <0>; > + port { > }; > }; > > diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts > index c43095c5cb5c..eb0c1e11fa4d 100644 > --- a/arch/arm/boot/dts/at91sam9n12ek.dts > +++ b/arch/arm/boot/dts/at91sam9n12ek.dts > @@ -134,9 +134,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; > > - port@0 { > - hlcdc_panel_output: endpoint@0 { > - reg = <0>; > + port { > + hlcdc_panel_output: endpoint { > remote-endpoint = <&panel_input>; > }; > }; > @@ -246,13 +245,8 @@ > #size-cells = <0>; > status = "okay"; > > - port@0 { > - reg = <0>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - panel_input: endpoint@0 { > - reg = <0>; > + port { > + panel_input: endpoint { > remote-endpoint = <&hlcdc_panel_output>; > }; > }; > diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi > index 1629db9dd563..e243dff67a67 100644 > --- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi > +++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi > @@ -23,13 +23,8 @@ > > hlcdc-display-controller { > compatible = "atmel,hlcdc-display-controller"; > - #address-cells = <1>; > - #size-cells = <0>; > > - port@0 { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <0>; > + port { > }; > }; > > diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi > index 34c089fe0bc0..5aea8fd09ad6 100644 > --- a/arch/arm/boot/dts/at91sam9x5dm.dtsi > +++ b/arch/arm/boot/dts/at91sam9x5dm.dtsi > @@ -29,9 +29,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; > > - port@0 { > - hlcdc_panel_output: endpoint@0 { > - reg = <0>; > + port { > + hlcdc_panel_output: endpoint { > remote-endpoint = <&panel_input>; > }; > }; > @@ -80,12 +79,8 @@ > #size-cells = <0>; > status = "disabled"; > > - port@0 { > - #address-cells = <1>; > - #size-cells = <0>; > - > - panel_input: endpoint@0 { > - reg = <0>; > + port { > + panel_input: endpoint { > remote-endpoint = <&hlcdc_panel_output>; > }; > }; > diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi > index eae5e1ee9cd8..2c51042e1f6b 100644 > --- a/arch/arm/boot/dts/sama5d3.dtsi > +++ b/arch/arm/boot/dts/sama5d3.dtsi > @@ -239,8 +239,6 @@ > clock-names = "isi_clk"; > status = "disabled"; > port { > - #address-cells = <1>; > - #size-cells = <0>; > }; > }; > > diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi > index be7cfefc6c31..2d042d7ec531 100644 > --- a/arch/arm/boot/dts/sama5d3_lcd.dtsi > +++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi > @@ -23,13 +23,7 @@ > > hlcdc-display-controller { > compatible = "atmel,hlcdc-display-controller"; > - #address-cells = <1>; > - #size-cells = <0>; > - > - port@0 { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <0>; > + port { > }; > }; > > diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi > index 0cf9beddd556..90d7b64915ec 100644 > --- a/arch/arm/boot/dts/sama5d4.dtsi > +++ b/arch/arm/boot/dts/sama5d4.dtsi > @@ -333,13 +333,7 @@ > > hlcdc-display-controller { > compatible = "atmel,hlcdc-display-controller"; > - #address-cells = <1>; > - #size-cells = <0>; > - > - port@0 { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <0>; > + port { > }; > }; >
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts index fe05aaa7ac87..72c3b077fb46 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts @@ -49,9 +49,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; - port@0 { - hlcdc_panel_output: endpoint@0 { - reg = <0>; + port { + hlcdc_panel_output: endpoint { remote-endpoint = <&panel_input>; }; }; @@ -144,16 +143,10 @@ /* Actually Ampire 800480R2 */ compatible = "foxlink,fl500wvr00-a0t", "simple-panel"; backlight = <&backlight>; - #address-cells = <1>; - #size-cells = <0>; status = "okay"; - port@0 { - #address-cells = <1>; - #size-cells = <0>; - - panel_input: endpoint@0 { - reg = <0>; + port { + panel_input: endpoint { remote-endpoint = <&hlcdc_panel_output>; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 1ee25a475be8..36729e3f2899 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -1114,8 +1114,6 @@ clock-names = "isi_clk"; status = "disabled"; port { - #address-cells = <1>; - #size-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 37cb81f457b5..a071fccb729b 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -475,13 +475,7 @@ hlcdc-display-controller { compatible = "atmel,hlcdc-display-controller"; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; + port { }; }; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index c43095c5cb5c..eb0c1e11fa4d 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -134,9 +134,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; - port@0 { - hlcdc_panel_output: endpoint@0 { - reg = <0>; + port { + hlcdc_panel_output: endpoint { remote-endpoint = <&panel_input>; }; }; @@ -246,13 +245,8 @@ #size-cells = <0>; status = "okay"; - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - panel_input: endpoint@0 { - reg = <0>; + port { + panel_input: endpoint { remote-endpoint = <&hlcdc_panel_output>; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi index 1629db9dd563..e243dff67a67 100644 --- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi @@ -23,13 +23,8 @@ hlcdc-display-controller { compatible = "atmel,hlcdc-display-controller"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; + port { }; }; diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi index 34c089fe0bc0..5aea8fd09ad6 100644 --- a/arch/arm/boot/dts/at91sam9x5dm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5dm.dtsi @@ -29,9 +29,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; - port@0 { - hlcdc_panel_output: endpoint@0 { - reg = <0>; + port { + hlcdc_panel_output: endpoint { remote-endpoint = <&panel_input>; }; }; @@ -80,12 +79,8 @@ #size-cells = <0>; status = "disabled"; - port@0 { - #address-cells = <1>; - #size-cells = <0>; - - panel_input: endpoint@0 { - reg = <0>; + port { + panel_input: endpoint { remote-endpoint = <&hlcdc_panel_output>; }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index eae5e1ee9cd8..2c51042e1f6b 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -239,8 +239,6 @@ clock-names = "isi_clk"; status = "disabled"; port { - #address-cells = <1>; - #size-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi index be7cfefc6c31..2d042d7ec531 100644 --- a/arch/arm/boot/dts/sama5d3_lcd.dtsi +++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi @@ -23,13 +23,7 @@ hlcdc-display-controller { compatible = "atmel,hlcdc-display-controller"; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; + port { }; }; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 0cf9beddd556..90d7b64915ec 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -333,13 +333,7 @@ hlcdc-display-controller { compatible = "atmel,hlcdc-display-controller"; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; + port { }; };
Addresses for graph ports and endpoints are not necessary when there's only a single child. Fix the following warnings removing unnecessary addresses on OF graph nodes: Warning (graph_child_address): /ahb/apb/hlcdc@f0030000/hlcdc-display-controller: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary Warning (graph_child_address): /ahb/apb/hlcdc@f0030000/hlcdc-display-controller/port@0: graph node has single child node 'endpoint', #address-cells/#size-cells are not necessary Warning (graph_child_address): /ahb/apb/isi@f0034000/port: graph node has single child node 'endpoint', #address-cells/#size-cells are not necessary Warning (graph_child_address): /panel/port@0: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> --- arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts | 15 ++++----------- arch/arm/boot/dts/at91sam9g45.dtsi | 2 -- arch/arm/boot/dts/at91sam9n12.dtsi | 8 +------- arch/arm/boot/dts/at91sam9n12ek.dts | 14 ++++---------- arch/arm/boot/dts/at91sam9x5_lcd.dtsi | 7 +------ arch/arm/boot/dts/at91sam9x5dm.dtsi | 13 ++++--------- arch/arm/boot/dts/sama5d3.dtsi | 2 -- arch/arm/boot/dts/sama5d3_lcd.dtsi | 8 +------- arch/arm/boot/dts/sama5d4.dtsi | 8 +------- 9 files changed, 16 insertions(+), 61 deletions(-)