| Message ID | 20180516063921.10406-1-nikita.yoush@cogentembedded.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 16.05.2018 08:39, Nikita Yushchenko wrote: > Vybrid has single internal temperature sensor connected to both internal > ADC modules. > > vf610-zii-dev already has ADC0 enabled. Now, to get temperature sensor > captured by iio_hwmon driver, need to configure iio_hwmon node to use > that ADC. That seems sensible. Acked-by: Stefan Agner <stefan@agner.ch> > > Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> > --- > arch/arm/boot/dts/vf610-zii-dev.dtsi | 4 ++++ > arch/arm/boot/dts/vfxxx.dtsi | 2 +- > 2 files changed, 5 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi > b/arch/arm/boot/dts/vf610-zii-dev.dtsi > index 4890b8a5aa44..5ae5abfe1d55 100644 > --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi > +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi > @@ -222,6 +222,10 @@ > status = "okay"; > }; > > +&tempsensor { > + io-channels = <&adc0 16>; > +}; > + > &iomuxc { > pinctrl_adc0_ad5: adc0ad5grp { > fsl,pins = < > diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi > index c3f09b737924..d392794d9c13 100644 > --- a/arch/arm/boot/dts/vfxxx.dtsi > +++ b/arch/arm/boot/dts/vfxxx.dtsi > @@ -84,7 +84,7 @@ > mask = <0x1000>; > }; > > - iio-hwmon { > + tempsensor: iio-hwmon { > compatible = "iio-hwmon"; > io-channels = <&adc0 16>, <&adc1 16>; > };
On Wed, May 16, 2018 at 09:39:21AM +0300, Nikita Yushchenko wrote: > Vybrid has single internal temperature sensor connected to both internal > ADC modules. > > vf610-zii-dev already has ADC0 enabled. Now, to get temperature sensor > captured by iio_hwmon driver, need to configure iio_hwmon node to use > that ADC. > > Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Applied, thanks.
diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi index 4890b8a5aa44..5ae5abfe1d55 100644 --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -222,6 +222,10 @@ status = "okay"; }; +&tempsensor { + io-channels = <&adc0 16>; +}; + &iomuxc { pinctrl_adc0_ad5: adc0ad5grp { fsl,pins = < diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index c3f09b737924..d392794d9c13 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -84,7 +84,7 @@ mask = <0x1000>; }; - iio-hwmon { + tempsensor: iio-hwmon { compatible = "iio-hwmon"; io-channels = <&adc0 16>, <&adc1 16>; };
Vybrid has single internal temperature sensor connected to both internal ADC modules. vf610-zii-dev already has ADC0 enabled. Now, to get temperature sensor captured by iio_hwmon driver, need to configure iio_hwmon node to use that ADC. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> --- arch/arm/boot/dts/vf610-zii-dev.dtsi | 4 ++++ arch/arm/boot/dts/vfxxx.dtsi | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-)