diff mbox

[net-next,v3,09/10] arm64: dts: marvell: 8040-db: describe the 10G interfaces as fixed-link

Message ID 20180517082939.14598-10-antoine.tenart@bootlin.com (mailing list archive)
State New, archived
Headers show

Commit Message

Antoine Tenart May 17, 2018, 8:29 a.m. UTC 
This patch adds a fixed-link node to both 10G interfaces of the 8040-db
board. This is required as the mvpp2 driver now uses phylink. The best
solution would have been to describe the SFP cages but they are not
wired correctly, and thus unusable, so we chose to use fixed-link
instead.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
---
 arch/arm64/boot/dts/marvell/armada-8040-db.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 5689fb23bbab..1bac437369a1 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -177,6 +177,11 @@ 
 &cp0_eth0 {
 	status = "okay";
 	phy-mode = "10gbase-kr";
+
+	fixed-link {
+		speed = <10000>;
+		full-duplex;
+	};
 };
 
 &cp0_eth2 {
@@ -303,6 +308,11 @@ 
 &cp1_eth0 {
 	status = "okay";
 	phy-mode = "10gbase-kr";
+
+	fixed-link {
+		speed = <10000>;
+		full-duplex;
+	};
 };
 
 &cp1_eth1 {