diff mbox

[v5,2/4] dt-bindings: timer: add i.MX EPIT timer binding

Message ID 20180604100035.19558-3-peron.clem@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Clément Péron June 4, 2018, 10 a.m. UTC
From: Clément Peron <clement.peron@devialet.com>

Add devicetree binding document for NXP's i.MX SoC specific
EPIT timer driver.

Signed-off-by: Clément Peron <clement.peron@devialet.com>
---
 .../devicetree/bindings/timer/fsl,imxepit.txt | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/fsl,imxepit.txt

Comments

Rob Herring (Arm) June 5, 2018, 3:23 p.m. UTC | #1
On Mon, Jun 04, 2018 at 12:00:33PM +0200, Clément Péron wrote:
> From: Clément Peron <clement.peron@devialet.com>
> 
> Add devicetree binding document for NXP's i.MX SoC specific
> EPIT timer driver.
> 
> Signed-off-by: Clément Peron <clement.peron@devialet.com>
> ---
>  .../devicetree/bindings/timer/fsl,imxepit.txt | 21 +++++++++++++++++++
>  1 file changed, 21 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/timer/fsl,imxepit.txt
> 
> diff --git a/Documentation/devicetree/bindings/timer/fsl,imxepit.txt b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt
> new file mode 100644
> index 000000000000..de2e6ef68d24
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt
> @@ -0,0 +1,21 @@
> +Binding for the i.MX Enhanced Periodic Interrupt Timer (EPIT)
> +
> +The Enhanced Periodic Interrupt Timer (EPIT) is a 32-bit set-and-forget timer
> +that is capable of providing precise interrupts at regular intervals with
> +minimal processor intervention.
> +
> +Required properties:
> +- compatible: should be "fsl,<chip>-epit", "fsl,imx31-epit" where <chip> is
> +  imx25, imx6qdl, imx6sl, imx6sul or imx6sx.
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +- interrupts: Should contain EPIT controller interrupt
> +- clocks : The clock provided by the SoC to drive the timer.
> +
> +Example for i.MX6QDL:
> +	epit1: epit@20d0000 {

I think I already mentioned this, but:

timer@...

> +		compatible = "fsl,imx6qdl-epit", "fsl,imx31-epit";
> +		reg = <0x020d0000 0x4000>;
> +		interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&clks IMX6QDL_CLK_EPIT1>;
> +	};
> -- 
> 2.17.0
>
Clément Péron June 6, 2018, 8:12 a.m. UTC | #2
Hi Rob,

On Tue, 5 Jun 2018 at 17:23, Rob Herring <robh@kernel.org> wrote:
>
> On Mon, Jun 04, 2018 at 12:00:33PM +0200, Clément Péron wrote:
> > From: Clément Peron <clement.peron@devialet.com>
> >
> > Add devicetree binding document for NXP's i.MX SoC specific
> > EPIT timer driver.
> >
> > Signed-off-by: Clément Peron <clement.peron@devialet.com>
> > ---
> >  .../devicetree/bindings/timer/fsl,imxepit.txt | 21 +++++++++++++++++++
> >  1 file changed, 21 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/timer/fsl,imxepit.txt
> >
> > diff --git a/Documentation/devicetree/bindings/timer/fsl,imxepit.txt b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt
> > new file mode 100644
> > index 000000000000..de2e6ef68d24
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt
> > @@ -0,0 +1,21 @@
> > +Binding for the i.MX Enhanced Periodic Interrupt Timer (EPIT)
> > +
> > +The Enhanced Periodic Interrupt Timer (EPIT) is a 32-bit set-and-forget timer
> > +that is capable of providing precise interrupts at regular intervals with
> > +minimal processor intervention.
> > +
> > +Required properties:
> > +- compatible: should be "fsl,<chip>-epit", "fsl,imx31-epit" where <chip> is
> > +  imx25, imx6qdl, imx6sl, imx6sul or imx6sx.
> > +- reg: physical base address of the controller and length of memory mapped
> > +  region.
> > +- interrupts: Should contain EPIT controller interrupt
> > +- clocks : The clock provided by the SoC to drive the timer.
> > +
> > +Example for i.MX6QDL:
> > +     epit1: epit@20d0000 {
>
> I think I already mentioned this, but:
My bad, will update it

>
> timer@...
>
> > +             compatible = "fsl,imx6qdl-epit", "fsl,imx31-epit";
> > +             reg = <0x020d0000 0x4000>;
> > +             interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
> > +             clocks = <&clks IMX6QDL_CLK_EPIT1>;
> > +     };
> > --
> > 2.17.0
> >
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/timer/fsl,imxepit.txt b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt
new file mode 100644
index 000000000000..de2e6ef68d24
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt
@@ -0,0 +1,21 @@ 
+Binding for the i.MX Enhanced Periodic Interrupt Timer (EPIT)
+
+The Enhanced Periodic Interrupt Timer (EPIT) is a 32-bit set-and-forget timer
+that is capable of providing precise interrupts at regular intervals with
+minimal processor intervention.
+
+Required properties:
+- compatible: should be "fsl,<chip>-epit", "fsl,imx31-epit" where <chip> is
+  imx25, imx6qdl, imx6sl, imx6sul or imx6sx.
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: Should contain EPIT controller interrupt
+- clocks : The clock provided by the SoC to drive the timer.
+
+Example for i.MX6QDL:
+	epit1: epit@20d0000 {
+		compatible = "fsl,imx6qdl-epit", "fsl,imx31-epit";
+		reg = <0x020d0000 0x4000>;
+		interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX6QDL_CLK_EPIT1>;
+	};