| Message ID | 20180619220719.3200-1-nick@shmanahar.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Nick, Am Dienstag, den 19.06.2018, 23:07 +0100 schrieb Nick Dyer: > The pinctrl settings were incorrect for the touchscreen interrupt line, causing > an interrupt storm. This change has been tested with both the atmel_mxt_ts and > RMI4 drivers on the RDU1 units. > > > Signed-off-by: Nick Dyer <nick@shmanahar.org> > --- > arch/arm/boot/dts/imx51-zii-rdu1.dts | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts > index df9eca94d812..4d12ba54ba15 100644 > --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts > +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts > @@ -770,8 +770,8 @@ > > > pinctrl_ts: tsgrp { > > fsl,pins = < > > > - MX51_PAD_CSI1_D8__GPIO3_12 0x85 > > > - MX51_PAD_CSI1_D9__GPIO3_13 0x85 > > > + MX51_PAD_CSI1_D8__GPIO3_12 4 > + MX51_PAD_CSI1_D9__GPIO3_13 (1<<16) Please don't move away from using hex notation for the padctrl settings. Thanks, Lucas
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index df9eca94d812..4d12ba54ba15 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -770,8 +770,8 @@ pinctrl_ts: tsgrp { fsl,pins = < - MX51_PAD_CSI1_D8__GPIO3_12 0x85 - MX51_PAD_CSI1_D9__GPIO3_13 0x85 + MX51_PAD_CSI1_D8__GPIO3_12 4 + MX51_PAD_CSI1_D9__GPIO3_13 (1<<16) >; };
The pinctrl settings were incorrect for the touchscreen interrupt line, causing an interrupt storm. This change has been tested with both the atmel_mxt_ts and RMI4 drivers on the RDU1 units. Signed-off-by: Nick Dyer <nick@shmanahar.org> --- arch/arm/boot/dts/imx51-zii-rdu1.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)