diff mbox

[3/7] arm: dts: aspeed: Add Aspeed G4 USB Virtual Hub

Message ID 20180629035106.27181-4-benh@kernel.crashing.org (mailing list archive)
State New, archived
Headers show

Commit Message

Benjamin Herrenschmidt June 29, 2018, 3:51 a.m. UTC
This adds the (disabled by default) device node for the
Aspeed virtual hub,a long with clocks and pinmux.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Andrew Jeffery July 16, 2018, 5:34 a.m. UTC | #1
On Fri, 29 Jun 2018, at 13:21, Benjamin Herrenschmidt wrote:
> This adds the (disabled by default) device node for the
> Aspeed virtual hub,a long with clocks and pinmux.
> 
> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> ---
>  arch/arm/boot/dts/aspeed-g4.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
> index 1d7ffa9fdb11..54524564037c 100644
> --- a/arch/arm/boot/dts/aspeed-g4.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g4.dtsi
> @@ -131,6 +131,16 @@
>  			 */
>  		};
>  
> +		vhub: usb-vhub@1e6a0000 {
> +			compatible = "aspeed,ast2400-usb-vhub";
> +			reg = <0x1e6a0000 0x300>;
> +			interrupts = <5>;
> +			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_usb2d_default>;
> +			status = "disabled";
> +		};
> +

These are all generic properties, so it's pretty clear what's going on, but it seems there's no bindings document capturing the compatible string? Not wanting to be a pain, but shouldn't we have documented it?

>  		apb {
>  			compatible = "simple-bus";
>  			#address-cells = <1>;
> -- 
> 2.17.1
>
Benjamin Herrenschmidt July 16, 2018, 6:40 a.m. UTC | #2
On Mon, 2018-07-16 at 15:04 +0930, Andrew Jeffery wrote:
> On Fri, 29 Jun 2018, at 13:21, Benjamin Herrenschmidt wrote:
> > This adds the (disabled by default) device node for the
> > Aspeed virtual hub,a long with clocks and pinmux.
> > 
> > Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> > ---
> >  arch/arm/boot/dts/aspeed-g4.dtsi | 10 ++++++++++
> >  1 file changed, 10 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
> > index 1d7ffa9fdb11..54524564037c 100644
> > --- a/arch/arm/boot/dts/aspeed-g4.dtsi
> > +++ b/arch/arm/boot/dts/aspeed-g4.dtsi
> > @@ -131,6 +131,16 @@
> >  			 */
> >  		};
> >  
> > +		vhub: usb-vhub@1e6a0000 {
> > +			compatible = "aspeed,ast2400-usb-vhub";
> > +			reg = <0x1e6a0000 0x300>;
> > +			interrupts = <5>;
> > +			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
> > +			pinctrl-names = "default";
> > +			pinctrl-0 = <&pinctrl_usb2d_default>;
> > +			status = "disabled";
> > +		};
> > +
> 
> These are all generic properties, so it's pretty clear what's going
> on, but it seems there's no bindings document capturing the
> compatible string? Not wanting to be a pain, but shouldn't we have
> documented it?

The driver went in at a time when I hadn't realized we documented
bindings for devices using only standard properties these days. We can
send a binding to Rob later.

Cheers,
Ben.

> 
> >  		apb {
> >  			compatible = "simple-bus";
> >  			#address-cells = <1>;
> > -- 
> > 2.17.1
> >
Andrew Jeffery July 16, 2018, 6:43 a.m. UTC | #3
On Mon, 16 Jul 2018, at 16:10, Benjamin Herrenschmidt wrote:
> On Mon, 2018-07-16 at 15:04 +0930, Andrew Jeffery wrote:
> > On Fri, 29 Jun 2018, at 13:21, Benjamin Herrenschmidt wrote:
> > > This adds the (disabled by default) device node for the
> > > Aspeed virtual hub,a long with clocks and pinmux.
> > > 
> > > Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> > > ---
> > >  arch/arm/boot/dts/aspeed-g4.dtsi | 10 ++++++++++
> > >  1 file changed, 10 insertions(+)
> > > 
> > > diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
> > > index 1d7ffa9fdb11..54524564037c 100644
> > > --- a/arch/arm/boot/dts/aspeed-g4.dtsi
> > > +++ b/arch/arm/boot/dts/aspeed-g4.dtsi
> > > @@ -131,6 +131,16 @@
> > >  			 */
> > >  		};
> > >  
> > > +		vhub: usb-vhub@1e6a0000 {
> > > +			compatible = "aspeed,ast2400-usb-vhub";
> > > +			reg = <0x1e6a0000 0x300>;
> > > +			interrupts = <5>;
> > > +			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
> > > +			pinctrl-names = "default";
> > > +			pinctrl-0 = <&pinctrl_usb2d_default>;
> > > +			status = "disabled";
> > > +		};
> > > +
> > 
> > These are all generic properties, so it's pretty clear what's going
> > on, but it seems there's no bindings document capturing the
> > compatible string? Not wanting to be a pain, but shouldn't we have
> > documented it?
> 
> The driver went in at a time when I hadn't realized we documented
> bindings for devices using only standard properties these days. We can
> send a binding to Rob later.

Yep, I can't see it being controversial.

Acked-by: Andrew Jeffery <andrew@aj.id.au>

> 
> Cheers,
> Ben.
> 
> > 
> > >  		apb {
> > >  			compatible = "simple-bus";
> > >  			#address-cells = <1>;
> > > -- 
> > > 2.17.1
> > >
diff mbox

Patch

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 1d7ffa9fdb11..54524564037c 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -131,6 +131,16 @@ 
 			 */
 		};
 
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2400-usb-vhub";
+			reg = <0x1e6a0000 0x300>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2d_default>;
+			status = "disabled";
+		};
+
 		apb {
 			compatible = "simple-bus";
 			#address-cells = <1>;