@@ -514,6 +514,20 @@ static struct afe_port_map port_maps[AFE_PORT_MAX] = {
SLIMBUS_5_RX, 1, 1},
[SLIMBUS_6_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_RX,
SLIMBUS_6_RX, 1, 1},
+ [SLIMBUS_0_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_TX,
+ SLIMBUS_0_TX, 0, 1},
+ [SLIMBUS_1_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_TX,
+ SLIMBUS_1_TX, 0, 1},
+ [SLIMBUS_2_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_TX,
+ SLIMBUS_2_TX, 0, 1},
+ [SLIMBUS_3_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_TX,
+ SLIMBUS_3_TX, 0, 1},
+ [SLIMBUS_4_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_TX,
+ SLIMBUS_4_TX, 0, 1},
+ [SLIMBUS_5_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_TX,
+ SLIMBUS_5_TX, 0, 1},
+ [SLIMBUS_6_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_TX,
+ SLIMBUS_6_TX, 0, 1},
[PRIMARY_MI2S_RX] = { AFE_PORT_ID_PRIMARY_MI2S_RX,
PRIMARY_MI2S_RX, 1, 1},
[PRIMARY_MI2S_TX] = { AFE_PORT_ID_PRIMARY_MI2S_TX,
@@ -1372,6 +1386,13 @@ struct q6afe_port *q6afe_port_get_from_id(struct device *dev, int id)
case AFE_PORT_ID_MULTICHAN_HDMI_RX:
cfg_type = AFE_PARAM_ID_HDMI_CONFIG;
break;
+ case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_TX:
+ case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_TX:
+ case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_TX:
+ case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_TX:
+ case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_TX:
+ case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_TX:
+ case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_TX:
case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_RX:
case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_RX:
case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_RX:
Existing code already has support for SLIMbus TX and RX, only thing that was missing from TX side was mapping between virtual to actual DSP port ids. This patch adds those mappings. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- sound/soc/qcom/qdsp6/q6afe.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)