diff mbox

[v2,9/9] arm64: allwinner: dts: h6: enable USB3 port on Pine H64

Message ID 20180706153805.25842-10-icenowy@aosc.io (mailing list archive)
State New, archived
Headers show

Commit Message

Icenowy Zheng July 6, 2018, 3:38 p.m. UTC 
Pine H64 board have a USB3 port, which is connected to the USB3 pins of
the H6 SoC, and the 5V power supply is controlled via GPIO (shared with
the power USB ports).

Enable this port.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Changes in v2:
- Rebased on top of the USB2 support patches.
- Dropped the enable of the dwc3-of-simple node.

 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 9 +++++++++
 1 file changed, 9 insertions(+)
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 104369228994..28eeb8dcfa35 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -51,6 +51,10 @@ 
 	};
 };
 
+&dwc3 {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -93,3 +97,8 @@ 
 	usb3_vbus-supply = <&reg_usb_vbus>;
 	status = "okay";
 };
+
+&usb3phy {
+	phy-supply = <&reg_usb_vbus>;
+	status = "okay";
+};