| Message ID | 20180709154848.5401-4-stefan@agner.ch (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 55bcea245df6..f9bacc9ff2b6 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -457,6 +457,7 @@ pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>; vqmmc-supply = <®_3p3v>; bus-width = <8>; + disable-wp; no-1-8-v; status = "disabled"; }; @@ -467,6 +468,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; vqmmc-supply = <®_3p3v>; bus-width = <4>; + disable-wp; no-1-8-v; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index bb44829dacbe..8ae17fdf6cf6 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -387,6 +387,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ + disable-wp; vqmmc-supply = <®_3p3v>; bus-width = <4>; no-1-8-v;
Use the disable-wp to indicate that Apalis and Colibri iMX6 do not make use of the native write-protect signal available on the i.MX 6 SoCs. This prevents warnings: mmc0: host does not support reading read-only switch, assuming write-enable Signed-off-by: Stefan Agner <stefan@agner.ch> --- arch/arm/boot/dts/imx6qdl-apalis.dtsi | 2 ++ arch/arm/boot/dts/imx6qdl-colibri.dtsi | 1 + 2 files changed, 3 insertions(+)