| Message ID | 20180731185917.176074-1-mka@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v6,1/5] dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg' | expand |
On Tue, Jul 31, 2018 at 11:59:13AM -0700, Matthias Kaehlcke wrote: > The documentation claims that the 'reg' property consists of two values, > the SPMI address and the length of the controller's registers. However > the SPMI bus to which it is added specifies "#size-cells = <0>;". Remove > the controller register length from the documentation of the field and the > example. > > Signed-off-by: Matthias Kaehlcke <mka@chromium.org> > Reviewed-by: Douglas Anderson <dianders@chromium.org> > --- > Changes in v6: > - patch added to the series > --- > .../devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) Reviewed-by: Rob Herring <robh@kernel.org>
Hey On Tue, Jul 31, 2018 at 11:59:13AM -0700, Matthias Kaehlcke wrote: > The documentation claims that the 'reg' property consists of two values, > the SPMI address and the length of the controller's registers. However > the SPMI bus to which it is added specifies "#size-cells = <0>;". Remove > the controller register length from the documentation of the field and the > example. queuing this for next merge window. Applied up to patch 3. both dt changes go via your arch tree and you can add my ack on them. Acked-by: Eduardo Valentin <edubezval@gmail.com> > > Signed-off-by: Matthias Kaehlcke <mka@chromium.org> > Reviewed-by: Douglas Anderson <dianders@chromium.org> > --- > Changes in v6: > - patch added to the series > --- > .../devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt > index 290ec06fa33a..86fb41fe772f 100644 > --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt > +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt > @@ -6,8 +6,7 @@ interrupt signal and status register to identify high PMIC die temperature. > > Required properties: > - compatible: Should contain "qcom,spmi-temp-alarm". > -- reg: Specifies the SPMI address and length of the controller's > - registers. > +- reg: Specifies the SPMI address. > - interrupts: PMIC temperature alarm interrupt. > - #thermal-sensor-cells: Should be 0. See thermal.txt for a description. > > @@ -20,7 +19,7 @@ Example: > > pm8941_temp: thermal-alarm@2400 { > compatible = "qcom,spmi-temp-alarm"; > - reg = <0x2400 0x100>; > + reg = <0x2400>; > interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; > #thermal-sensor-cells = <0>; > > -- > 2.18.0.345.g5c9ce644c3-goog >
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt index 290ec06fa33a..86fb41fe772f 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt @@ -6,8 +6,7 @@ interrupt signal and status register to identify high PMIC die temperature. Required properties: - compatible: Should contain "qcom,spmi-temp-alarm". -- reg: Specifies the SPMI address and length of the controller's - registers. +- reg: Specifies the SPMI address. - interrupts: PMIC temperature alarm interrupt. - #thermal-sensor-cells: Should be 0. See thermal.txt for a description. @@ -20,7 +19,7 @@ Example: pm8941_temp: thermal-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400 0x100>; + reg = <0x2400>; interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; #thermal-sensor-cells = <0>;