diff mbox series

[4/4] arm64: dts: Add devicetree support for HiKey970 board

Message ID 20180810175339.25421-5-manivannan.sadhasivam@linaro.org (mailing list archive)
State New, archived
Headers show
Series Add HiSilicon Hi3670 SoC and HiKey970 board | expand

Commit Message

Manivannan Sadhasivam Aug. 10, 2018, 5:53 p.m. UTC 
Add devicetree support for HiKey970 development board which
based on Hi3670 SoC and is also one of the 96Boards Consumer
Edition and AI platform.

Only UART6 is enabled which is the default console required
by the 96Boards Consumer Edition Specification.

This patch has been tested on HiKey970 Board.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/hisilicon/Makefile        |  1 +
 .../boot/dts/hisilicon/hi3670-hikey970.dts    | 35 +++++++++++++++++++
 2 files changed, 36 insertions(+)
 create mode 100644 arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
index 03d93f8ef8a9..f4d68caeba83 100644
--- a/arch/arm64/boot/dts/hisilicon/Makefile
+++ b/arch/arm64/boot/dts/hisilicon/Makefile
@@ -1,5 +1,6 @@ 
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi3670-hikey970.dtb
 dtb-$(CONFIG_ARCH_HISI) += hi3798cv200-poplar.dtb
 dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
 dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
new file mode 100644
index 000000000000..4f5118642024
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -0,0 +1,35 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon HiKey970 Development Board
+ *
+ * Copyright (C) 2016, Hisilicon Ltd.
+ * Copyright (C) 2018, Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "hi3670.dtsi"
+
+/ {
+	model = "HiKey970";
+	compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
+
+	aliases {
+		serial6 = &uart6;       /* console UART */
+	};
+
+	chosen {
+		stdout-path = "serial6:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* expect bootloader to fill in this region */
+		reg = <0x0 0x0 0x0 0x0>;
+	};
+};
+
+&uart6 {
+	status = "okay";
+};