diff mbox series

[v2,3/3] dts: arm64/sdm845: Add node for qcom,smmu-v2

Message ID 20180814102740.30222-4-vivek.gautam@codeaurora.org (mailing list archive)
State New, archived
Headers show
Series Enable smmu support on sdm845 | expand

Commit Message

Vivek Gautam Aug. 14, 2018, 10:27 a.m. UTC
Add device node for qcom,smmu-v2 available on sdm845.
This smmu is available only to GPU device.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

Comments

Robin Murphy Aug. 14, 2018, 10:49 a.m. UTC | #1
Hi Vivek,

On 14/08/18 11:27, Vivek Gautam wrote:
> Add device node for qcom,smmu-v2 available on sdm845.
> This smmu is available only to GPU device.
> 
> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> ---
>   arch/arm64/boot/dts/qcom/sdm845.dtsi | 23 +++++++++++++++++++++++
>   1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 1c2be2082f33..bd1ec5fa5146 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -6,6 +6,7 @@
>    */
>   
>   #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> +#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
>   #include <dt-bindings/clock/qcom,rpmh.h>
>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>   #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> @@ -989,6 +990,28 @@
>   			cell-index = <0>;
>   		};
>   
> +		gpu_smmu: iommu@5040000 {
> +			compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2";

Which of "sdm845" or "msm8996"[1] is the actual SoC name here?

Robin.

[1] 
https://www.mail-archive.com/freedreno@lists.freedesktop.org/msg02659.html

> +			reg = <0x5040000 0x10000>;
> +			#iommu-cells = <1>;
> +			#global-interrupts = <2>;
> +			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
> +				     <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
> +				     <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
> +				     <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
> +				     <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
> +				     <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
> +				     <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
> +				     <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
> +			clock-names = "bus", "iface";
> +			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
> +				 <&gcc GCC_GPU_CFG_AHB_CLK>;
> +
> +			/*power-domains = <&gpucc GPU_CX_GDSC>;*/
> +		};
> +
>   		apps_smmu: iommu@15000000 {
>   			compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
>   			reg = <0x15000000 0x80000>;
>
Vivek Gautam Aug. 14, 2018, 7:39 p.m. UTC | #2
Adding Jordan here.

On Tue, Aug 14, 2018 at 4:19 PM, Robin Murphy <robin.murphy@arm.com> wrote:
> Hi Vivek,
>
> On 14/08/18 11:27, Vivek Gautam wrote:
>>
>> Add device node for qcom,smmu-v2 available on sdm845.
>> This smmu is available only to GPU device.
>>
>> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
>> ---
>>   arch/arm64/boot/dts/qcom/sdm845.dtsi | 23 +++++++++++++++++++++++
>>   1 file changed, 23 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> index 1c2be2082f33..bd1ec5fa5146 100644
>> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> @@ -6,6 +6,7 @@
>>    */
>>     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
>> +#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
>>   #include <dt-bindings/clock/qcom,rpmh.h>
>>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>>   #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>> @@ -989,6 +990,28 @@
>>                         cell-index = <0>;
>>                 };
>>   +             gpu_smmu: iommu@5040000 {
>> +                       compatible = "qcom,sdm845-smmu-v2",
>> "qcom,smmu-v2";
>
>
> Which of "sdm845" or "msm8996"[1] is the actual SoC name here?

Well, the bindings use the SoC prefix with smmu-v2, so it should be
sdm845 for this SoC. This is same as I posted in my v1 of the series [2].
Using 8996 based string in sdm845 makes things look awful.

Thanks
Vivek

[2] https://patchwork.kernel.org/patch/10534989/

>
> Robin.
>
> [1]
> https://www.mail-archive.com/freedreno@lists.freedesktop.org/msg02659.html
>
>> +                       reg = <0x5040000 0x10000>;
>> +                       #iommu-cells = <1>;
>> +                       #global-interrupts = <2>;
>> +                       interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
>> +                                    <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
>> +                                    <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
>> +                                    <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
>> +                                    <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
>> +                                    <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
>> +                                    <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
>> +                                    <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
>> +                                    <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
>> +                                    <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
>> +                       clock-names = "bus", "iface";
>> +                       clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
>> +                                <&gcc GCC_GPU_CFG_AHB_CLK>;
>> +
>> +                       /*power-domains = <&gpucc GPU_CX_GDSC>;*/
>> +               };
>> +
>>                 apps_smmu: iommu@15000000 {
>>                         compatible = "qcom,sdm845-smmu-500",
>> "arm,mmu-500";
>>                         reg = <0x15000000 0x80000>;
>>
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
Rob Herring Aug. 14, 2018, 10:57 p.m. UTC | #3
On Wed, Aug 15, 2018 at 01:09:43AM +0530, Vivek Gautam wrote:
> Adding Jordan here.
> 
> On Tue, Aug 14, 2018 at 4:19 PM, Robin Murphy <robin.murphy@arm.com> wrote:
> > Hi Vivek,
> >
> > On 14/08/18 11:27, Vivek Gautam wrote:
> >>
> >> Add device node for qcom,smmu-v2 available on sdm845.
> >> This smmu is available only to GPU device.
> >>
> >> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> >> ---
> >>   arch/arm64/boot/dts/qcom/sdm845.dtsi | 23 +++++++++++++++++++++++
> >>   1 file changed, 23 insertions(+)
> >>
> >> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> >> b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> >> index 1c2be2082f33..bd1ec5fa5146 100644
> >> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> >> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> >> @@ -6,6 +6,7 @@
> >>    */
> >>     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> >> +#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
> >>   #include <dt-bindings/clock/qcom,rpmh.h>
> >>   #include <dt-bindings/interrupt-controller/arm-gic.h>
> >>   #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> >> @@ -989,6 +990,28 @@
> >>                         cell-index = <0>;
> >>                 };
> >>   +             gpu_smmu: iommu@5040000 {
> >> +                       compatible = "qcom,sdm845-smmu-v2",
> >> "qcom,smmu-v2";
> >
> >
> > Which of "sdm845" or "msm8996"[1] is the actual SoC name here?
> 
> Well, the bindings use the SoC prefix with smmu-v2, so it should be
> sdm845 for this SoC. This is same as I posted in my v1 of the series [2].
> Using 8996 based string in sdm845 makes things look awful.

You need to list valid values of '<soc>' in the binding. Otherwise we 
get this confusion.

Rob
Vivek Gautam Aug. 27, 2018, 8:56 a.m. UTC | #4
Hi Rob, Robin,


On 8/15/2018 4:27 AM, Rob Herring wrote:
> On Wed, Aug 15, 2018 at 01:09:43AM +0530, Vivek Gautam wrote:
>> Adding Jordan here.
>>
>> On Tue, Aug 14, 2018 at 4:19 PM, Robin Murphy <robin.murphy@arm.com> wrote:
>>> Hi Vivek,
>>>
>>> On 14/08/18 11:27, Vivek Gautam wrote:
>>>> Add device node for qcom,smmu-v2 available on sdm845.
>>>> This smmu is available only to GPU device.
>>>>
>>>> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
>>>> ---
>>>>    arch/arm64/boot/dts/qcom/sdm845.dtsi | 23 +++++++++++++++++++++++
>>>>    1 file changed, 23 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi
>>>> b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>>>> index 1c2be2082f33..bd1ec5fa5146 100644
>>>> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>>>> @@ -6,6 +6,7 @@
>>>>     */
>>>>      #include <dt-bindings/clock/qcom,gcc-sdm845.h>
>>>> +#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
>>>>    #include <dt-bindings/clock/qcom,rpmh.h>
>>>>    #include <dt-bindings/interrupt-controller/arm-gic.h>
>>>>    #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>>> @@ -989,6 +990,28 @@
>>>>                          cell-index = <0>;
>>>>                  };
>>>>    +             gpu_smmu: iommu@5040000 {
>>>> +                       compatible = "qcom,sdm845-smmu-v2",
>>>> "qcom,smmu-v2";
>>>
>>> Which of "sdm845" or "msm8996"[1] is the actual SoC name here?
>> Well, the bindings use the SoC prefix with smmu-v2, so it should be
>> sdm845 for this SoC. This is same as I posted in my v1 of the series [2].
>> Using 8996 based string in sdm845 makes things look awful.
> You need to list valid values of '<soc>' in the binding. Otherwise we
> get this confusion.

Sorry for delayed response, I was away on vacation.
I will list down the valid values for '<soc>' as suggested, and respin 
this series, and
smmu bindings patch that comes as part of the runtime pm series [1].

[1] https://lore.kernel.org/patchwork/patch/968017/

Best regards
Vivek

>
> Rob
Vivek Gautam Aug. 27, 2018, 11:12 a.m. UTC | #5
On 8/27/2018 2:26 PM, Vivek Gautam wrote:
> Hi Rob, Robin,
>
>
> On 8/15/2018 4:27 AM, Rob Herring wrote:
>> On Wed, Aug 15, 2018 at 01:09:43AM +0530, Vivek Gautam wrote:
>>> Adding Jordan here.
>>>
>>> On Tue, Aug 14, 2018 at 4:19 PM, Robin Murphy <robin.murphy@arm.com> 
>>> wrote:
>>>> Hi Vivek,
>>>>
>>>> On 14/08/18 11:27, Vivek Gautam wrote:
>>>>> Add device node for qcom,smmu-v2 available on sdm845.
>>>>> This smmu is available only to GPU device.
>>>>>
>>>>> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
>>>>> ---
>>>>>    arch/arm64/boot/dts/qcom/sdm845.dtsi | 23 +++++++++++++++++++++++
>>>>>    1 file changed, 23 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi
>>>>> b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>>>>> index 1c2be2082f33..bd1ec5fa5146 100644
>>>>> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
>>>>> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>>>>> @@ -6,6 +6,7 @@
>>>>>     */
>>>>>      #include <dt-bindings/clock/qcom,gcc-sdm845.h>
>>>>> +#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
>>>>>    #include <dt-bindings/clock/qcom,rpmh.h>
>>>>>    #include <dt-bindings/interrupt-controller/arm-gic.h>
>>>>>    #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>>>> @@ -989,6 +990,28 @@
>>>>>                          cell-index = <0>;
>>>>>                  };
>>>>>    +             gpu_smmu: iommu@5040000 {
>>>>> +                       compatible = "qcom,sdm845-smmu-v2",
>>>>> "qcom,smmu-v2";
>>>>
>>>> Which of "sdm845" or "msm8996"[1] is the actual SoC name here?
>>> Well, the bindings use the SoC prefix with smmu-v2, so it should be
>>> sdm845 for this SoC. This is same as I posted in my v1 of the series 
>>> [2].
>>> Using 8996 based string in sdm845 makes things look awful.
>> You need to list valid values of '<soc>' in the binding. Otherwise we
>> get this confusion.
>
> Sorry for delayed response, I was away on vacation.
> I will list down the valid values for '<soc>' as suggested, and respin 
> this series, and
> smmu bindings patch that comes as part of the runtime pm series [3].
>
> [3] https://lore.kernel.org/patchwork/patch/968017/
>

I have updated the binding doc with valid values for '<soc>' string [4].
Kindly review this based on [4].

[4] https://lore.kernel.org/patchwork/patch/977888/

Best regards
Vivek
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 1c2be2082f33..bd1ec5fa5146 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -6,6 +6,7 @@ 
  */
 
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -989,6 +990,28 @@ 
 			cell-index = <0>;
 		};
 
+		gpu_smmu: iommu@5040000 {
+			compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2";
+			reg = <0x5040000 0x10000>;
+			#iommu-cells = <1>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
+			clock-names = "bus", "iface";
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_CFG_AHB_CLK>;
+
+			/*power-domains = <&gpucc GPU_CX_GDSC>;*/
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
 			reg = <0x15000000 0x80000>;