diff mbox series

[i2c-next,v4] i2c: aspeed: Handle master/slave combined irq events properly

Message ID 20180820201632.29229-1-jae.hyun.yoo@linux.intel.com (mailing list archive)
State New, archived
Headers show
Series [i2c-next,v4] i2c: aspeed: Handle master/slave combined irq events properly | expand

Commit Message

Jae Hyun Yoo Aug. 20, 2018, 8:16 p.m. UTC
In most of cases, interrupt bits are set one by one but there are
also a lot of other cases that Aspeed I2C IP sends multiple
interrupt bits with combining master and slave events using a
single interrupt call. It happens much more in multi-master
environment than single-master. For an example, when master is
waiting for a NORMAL_STOP interrupt in its MASTER_STOP state,
SLAVE_MATCH and RX_DONE interrupts could come along with the
NORMAL_STOP in case of an another master immediately sends data
just after acquiring the bus. In this case, the NORMAL_STOP
interrupt should be handled by master_irq and the SLAVE_MATCH and
RX_DONE interrupts should be handled by slave_irq. This commit
modifies irq hadling logic to handle the master/slave combined
events properly.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
---
Changes since v3:
- Fixed typos in a comment.

Changes since v2:
- Changed the name of ASPEED_I2CD_INTR_ERRORS to ASPEED_I2CD_INTR_MASTER_ERRORS
- Removed a member irq_status from the struct aspeed_i2c_bus and changed
  master_irq and slave_irq handlers to make them return status_ack.
- Added a comment to explain why it needs to try both irq handlers.

Changes since v1:
- Fixed a grammar issue in commit message.
- Added a missing line feed character into a message printing.

 drivers/i2c/busses/i2c-aspeed.c | 110 +++++++++++++++++++-------------
 1 file changed, 65 insertions(+), 45 deletions(-)

Comments

Brendan Higgins Aug. 23, 2018, 6:46 a.m. UTC | #1
On Mon, Aug 20, 2018 at 1:16 PM Jae Hyun Yoo
<jae.hyun.yoo@linux.intel.com> wrote:
>
> In most of cases, interrupt bits are set one by one but there are
> also a lot of other cases that Aspeed I2C IP sends multiple
> interrupt bits with combining master and slave events using a
> single interrupt call. It happens much more in multi-master
> environment than single-master. For an example, when master is
> waiting for a NORMAL_STOP interrupt in its MASTER_STOP state,
> SLAVE_MATCH and RX_DONE interrupts could come along with the
> NORMAL_STOP in case of an another master immediately sends data
> just after acquiring the bus. In this case, the NORMAL_STOP
> interrupt should be handled by master_irq and the SLAVE_MATCH and
> RX_DONE interrupts should be handled by slave_irq. This commit
> modifies irq hadling logic to handle the master/slave combined
> events properly.
>
> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
> ---
> Changes since v3:
> - Fixed typos in a comment.
>
> Changes since v2:
> - Changed the name of ASPEED_I2CD_INTR_ERRORS to ASPEED_I2CD_INTR_MASTER_ERRORS
> - Removed a member irq_status from the struct aspeed_i2c_bus and changed
>   master_irq and slave_irq handlers to make them return status_ack.
> - Added a comment to explain why it needs to try both irq handlers.
>
> Changes since v1:
> - Fixed a grammar issue in commit message.
> - Added a missing line feed character into a message printing.
>
>  drivers/i2c/busses/i2c-aspeed.c | 110 +++++++++++++++++++-------------
>  1 file changed, 65 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
> index a4f956c6d567..09eb4a9b355c 100644
> --- a/drivers/i2c/busses/i2c-aspeed.c
> +++ b/drivers/i2c/busses/i2c-aspeed.c
> @@ -82,6 +82,11 @@
>  #define ASPEED_I2CD_INTR_RX_DONE                       BIT(2)
>  #define ASPEED_I2CD_INTR_TX_NAK                                BIT(1)
>  #define ASPEED_I2CD_INTR_TX_ACK                                BIT(0)
> +#define ASPEED_I2CD_INTR_MASTER_ERRORS                                        \
> +               (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |                             \
> +                ASPEED_I2CD_INTR_SCL_TIMEOUT |                                \
> +                ASPEED_I2CD_INTR_ABNORMAL |                                   \
> +                ASPEED_I2CD_INTR_ARBIT_LOSS)
>  #define ASPEED_I2CD_INTR_ALL                                                  \
>                 (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |                             \
>                  ASPEED_I2CD_INTR_BUS_RECOVER_DONE |                           \
> @@ -227,20 +232,16 @@ static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
>  }
>
>  #if IS_ENABLED(CONFIG_I2C_SLAVE)
> -static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
> +static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
>  {
> -       u32 command, irq_status, status_ack = 0;
> +       u32 command, status_ack = 0;
>         struct i2c_client *slave = bus->slave;
> -       bool irq_handled = true;
>         u8 value;
>
> -       if (!slave) {
> -               irq_handled = false;
> -               goto out;
> -       }
> +       if (!slave)
> +               return 0;
>
>         command = readl(bus->base + ASPEED_I2C_CMD_REG);
> -       irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
>
>         /* Slave was requested, restart state machine. */
>         if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
> @@ -249,10 +250,8 @@ static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
>         }
>
>         /* Slave is not currently active, irq was for someone else. */
> -       if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
> -               irq_handled = false;
> -               goto out;
> -       }
> +       if (bus->slave_state == ASPEED_I2C_SLAVE_STOP)
> +               return status_ack;
>
>         dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
>                 irq_status, command);
> @@ -281,19 +280,19 @@ static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
>                 status_ack |= ASPEED_I2CD_INTR_TX_NAK;
>                 bus->slave_state = ASPEED_I2C_SLAVE_STOP;
>         }
> +       if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
> +               status_ack |= ASPEED_I2CD_INTR_TX_ACK;
>
>         switch (bus->slave_state) {
>         case ASPEED_I2C_SLAVE_READ_REQUESTED:
>                 if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
>                         dev_err(bus->dev, "Unexpected ACK on read request.\n");
>                 bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
> -
>                 i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
>                 writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
>                 writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
>                 break;
>         case ASPEED_I2C_SLAVE_READ_PROCESSED:
> -               status_ack |= ASPEED_I2CD_INTR_TX_ACK;
>                 if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK))
>                         dev_err(bus->dev,
>                                 "Expected ACK after processed read.\n");
> @@ -317,14 +316,7 @@ static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
>                 break;
>         }
>
> -       if (status_ack != irq_status)
> -               dev_err(bus->dev,
> -                       "irq handled != irq. expected %x, but was %x\n",
> -                       irq_status, status_ack);
> -       writel(status_ack, bus->base + ASPEED_I2C_INTR_STS_REG);
> -
> -out:
> -       return irq_handled;
> +       return status_ack;
>  }
>  #endif /* CONFIG_I2C_SLAVE */
>
> @@ -380,21 +372,21 @@ static int aspeed_i2c_is_irq_error(u32 irq_status)
>         return 0;
>  }
>
> -static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
> +static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
>  {
> -       u32 irq_status, status_ack = 0, command = 0;
> +       u32 status_ack = 0, command = 0;
>         struct i2c_msg *msg;
>         u8 recv_byte;
>         int ret;
>
> -       irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
> -       /* Ack all interrupt bits. */
> -       writel(irq_status, bus->base + ASPEED_I2C_INTR_STS_REG);
> -
>         if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) {
>                 bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
>                 status_ack |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE;
>                 goto out_complete;
> +       } else {
> +               /* Master is not currently active, irq was for someone else. */
> +               if (bus->master_state == ASPEED_I2C_MASTER_INACTIVE)
> +                       goto out_no_complete;
>         }
>
>         /*
> @@ -403,19 +395,22 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>          * INACTIVE state.
>          */
>         ret = aspeed_i2c_is_irq_error(irq_status);
> -       if (ret < 0) {
> +       if (ret) {
>                 dev_dbg(bus->dev, "received error interrupt: 0x%08x\n",
>                         irq_status);
>                 bus->cmd_err = ret;
>                 bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
> +               status_ack |= (irq_status & ASPEED_I2CD_INTR_MASTER_ERRORS);
>                 goto out_complete;
>         }
>
>         /* We are in an invalid state; reset bus to a known state. */
>         if (!bus->msgs) {
> -               dev_err(bus->dev, "bus in unknown state\n");
> +               dev_err(bus->dev, "bus in unknown state irq_status: 0x%x\n",
> +                       irq_status);
>                 bus->cmd_err = -EIO;
> -               if (bus->master_state != ASPEED_I2C_MASTER_STOP)
> +               if (bus->master_state != ASPEED_I2C_MASTER_STOP &&
> +                   bus->master_state != ASPEED_I2C_MASTER_INACTIVE)
>                         aspeed_i2c_do_stop(bus);
>                 goto out_no_complete;
>         }
> @@ -428,6 +423,11 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>          */
>         if (bus->master_state == ASPEED_I2C_MASTER_START) {
>                 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
> +                       if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_NAK))) {
> +                               bus->cmd_err = -ENXIO;
> +                               bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
> +                               goto out_complete;
> +                       }
>                         pr_devel("no slave present at %02x\n", msg->addr);
>                         status_ack |= ASPEED_I2CD_INTR_TX_NAK;
>                         bus->cmd_err = -ENXIO;
> @@ -506,7 +506,9 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>                 goto out_no_complete;
>         case ASPEED_I2C_MASTER_STOP:
>                 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) {
> -                       dev_err(bus->dev, "master failed to STOP\n");
> +                       dev_err(bus->dev,
> +                               "master failed to STOP irq_status:0x%x\n",
> +                               irq_status);
>                         bus->cmd_err = -EIO;
>                         /* Do not STOP as we have already tried. */
>                 } else {
> @@ -540,33 +542,51 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>                 bus->master_xfer_result = bus->msgs_index + 1;
>         complete(&bus->cmd_complete);
>  out_no_complete:
> -       if (irq_status != status_ack)
> -               dev_err(bus->dev,
> -                       "irq handled != irq. expected 0x%08x, but was 0x%08x\n",
> -                       irq_status, status_ack);
> -       return !!irq_status;
> +       return status_ack;
>  }
>
>  static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
>  {
>         struct aspeed_i2c_bus *bus = dev_id;
> -       bool ret;
> +       u32 irq_received, irq_status, irq_acked;
>
>         spin_lock(&bus->lock);
> +       irq_received = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
> +       irq_status = irq_received;
>
>  #if IS_ENABLED(CONFIG_I2C_SLAVE)
> -       if (aspeed_i2c_slave_irq(bus)) {
> -               dev_dbg(bus->dev, "irq handled by slave.\n");
> -               ret = true;
> -               goto out;
> +       /*
> +        * In most cases, interrupt bits will be set one by one, although
> +        * multiple interrupt bits could be set at the same time. It's also
> +        * possible that master interrupt bits could be set along with slave
> +        * interrupt bits. Each case needs to be handled using corresponding
> +        * handlers depending on the current state.
> +        */
> +       if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE) {
> +               irq_acked = aspeed_i2c_master_irq(bus, irq_status);
> +               irq_status &= ~irq_acked;
> +               if (irq_status)
> +                       irq_acked = aspeed_i2c_slave_irq(bus, irq_status);
> +       } else {
> +               irq_acked = aspeed_i2c_slave_irq(bus, irq_status);
> +               irq_status &= ~irq_acked;
> +               if (irq_status)
> +                       irq_acked = aspeed_i2c_master_irq(bus, irq_status);
>         }
> +#else
> +       irq_acked = aspeed_i2c_master_irq(bus, irq_status);
>  #endif /* CONFIG_I2C_SLAVE */
>
> -       ret = aspeed_i2c_master_irq(bus);
> +       irq_status &= ~irq_acked;
> +       if (irq_status)
> +               dev_err(bus->dev,
> +                       "irq handled != irq. expected 0x%08x, but was 0x%08x\n",
> +                       irq_received, irq_received ^ irq_status);

I think you want to use `irq_acked` here.

>
> -out:
> +       /* Ack all interrupt bits. */
> +       writel(irq_received, bus->base + ASPEED_I2C_INTR_STS_REG);
>         spin_unlock(&bus->lock);
> -       return ret ? IRQ_HANDLED : IRQ_NONE;
> +       return irq_status ? IRQ_NONE : IRQ_HANDLED;
>  }
>
>  static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
> --
> 2.18.0
>

One minor issue and then I think we are good to go!

Also, sorry about not reviewing your last patch. I missed it apparently.

Feel free to mark the next patch "Reviewed-by: Brendan Higgins
<brendanhiggins@google.com>"

Cheers
Jae Hyun Yoo Aug. 23, 2018, 6:29 p.m. UTC | #2
Hi Brendan,

On 8/22/2018 11:46 PM, Brendan Higgins wrote:
> On Mon, Aug 20, 2018 at 1:16 PM Jae Hyun Yoo
> <jae.hyun.yoo@linux.intel.com> wrote:
>>
>> In most of cases, interrupt bits are set one by one but there are
>> also a lot of other cases that Aspeed I2C IP sends multiple
>> interrupt bits with combining master and slave events using a
>> single interrupt call. It happens much more in multi-master
>> environment than single-master. For an example, when master is
>> waiting for a NORMAL_STOP interrupt in its MASTER_STOP state,
>> SLAVE_MATCH and RX_DONE interrupts could come along with the
>> NORMAL_STOP in case of an another master immediately sends data
>> just after acquiring the bus. In this case, the NORMAL_STOP
>> interrupt should be handled by master_irq and the SLAVE_MATCH and
>> RX_DONE interrupts should be handled by slave_irq. This commit
>> modifies irq hadling logic to handle the master/slave combined
>> events properly.
>>
>> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
>> ---
>> Changes since v3:
>> - Fixed typos in a comment.
>>
>> Changes since v2:
>> - Changed the name of ASPEED_I2CD_INTR_ERRORS to ASPEED_I2CD_INTR_MASTER_ERRORS
>> - Removed a member irq_status from the struct aspeed_i2c_bus and changed
>>    master_irq and slave_irq handlers to make them return status_ack.
>> - Added a comment to explain why it needs to try both irq handlers.
>>
>> Changes since v1:
>> - Fixed a grammar issue in commit message.
>> - Added a missing line feed character into a message printing.
>>
>>   drivers/i2c/busses/i2c-aspeed.c | 110 +++++++++++++++++++-------------
>>   1 file changed, 65 insertions(+), 45 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
>> index a4f956c6d567..09eb4a9b355c 100644
>> --- a/drivers/i2c/busses/i2c-aspeed.c
>> +++ b/drivers/i2c/busses/i2c-aspeed.c
>> @@ -82,6 +82,11 @@
>>   #define ASPEED_I2CD_INTR_RX_DONE                       BIT(2)
>>   #define ASPEED_I2CD_INTR_TX_NAK                                BIT(1)
>>   #define ASPEED_I2CD_INTR_TX_ACK                                BIT(0)
>> +#define ASPEED_I2CD_INTR_MASTER_ERRORS                                        \
>> +               (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |                             \
>> +                ASPEED_I2CD_INTR_SCL_TIMEOUT |                                \
>> +                ASPEED_I2CD_INTR_ABNORMAL |                                   \
>> +                ASPEED_I2CD_INTR_ARBIT_LOSS)
>>   #define ASPEED_I2CD_INTR_ALL                                                  \
>>                  (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |                             \
>>                   ASPEED_I2CD_INTR_BUS_RECOVER_DONE |                           \
>> @@ -227,20 +232,16 @@ static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
>>   }
>>
>>   #if IS_ENABLED(CONFIG_I2C_SLAVE)
>> -static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
>> +static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
>>   {
>> -       u32 command, irq_status, status_ack = 0;
>> +       u32 command, status_ack = 0;
>>          struct i2c_client *slave = bus->slave;
>> -       bool irq_handled = true;
>>          u8 value;
>>
>> -       if (!slave) {
>> -               irq_handled = false;
>> -               goto out;
>> -       }
>> +       if (!slave)
>> +               return 0;
>>
>>          command = readl(bus->base + ASPEED_I2C_CMD_REG);
>> -       irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
>>
>>          /* Slave was requested, restart state machine. */
>>          if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
>> @@ -249,10 +250,8 @@ static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
>>          }
>>
>>          /* Slave is not currently active, irq was for someone else. */
>> -       if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
>> -               irq_handled = false;
>> -               goto out;
>> -       }
>> +       if (bus->slave_state == ASPEED_I2C_SLAVE_STOP)
>> +               return status_ack;
>>
>>          dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
>>                  irq_status, command);
>> @@ -281,19 +280,19 @@ static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
>>                  status_ack |= ASPEED_I2CD_INTR_TX_NAK;
>>                  bus->slave_state = ASPEED_I2C_SLAVE_STOP;
>>          }
>> +       if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
>> +               status_ack |= ASPEED_I2CD_INTR_TX_ACK;
>>
>>          switch (bus->slave_state) {
>>          case ASPEED_I2C_SLAVE_READ_REQUESTED:
>>                  if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
>>                          dev_err(bus->dev, "Unexpected ACK on read request.\n");
>>                  bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
>> -
>>                  i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
>>                  writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
>>                  writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
>>                  break;
>>          case ASPEED_I2C_SLAVE_READ_PROCESSED:
>> -               status_ack |= ASPEED_I2CD_INTR_TX_ACK;
>>                  if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK))
>>                          dev_err(bus->dev,
>>                                  "Expected ACK after processed read.\n");
>> @@ -317,14 +316,7 @@ static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
>>                  break;
>>          }
>>
>> -       if (status_ack != irq_status)
>> -               dev_err(bus->dev,
>> -                       "irq handled != irq. expected %x, but was %x\n",
>> -                       irq_status, status_ack);
>> -       writel(status_ack, bus->base + ASPEED_I2C_INTR_STS_REG);
>> -
>> -out:
>> -       return irq_handled;
>> +       return status_ack;
>>   }
>>   #endif /* CONFIG_I2C_SLAVE */
>>
>> @@ -380,21 +372,21 @@ static int aspeed_i2c_is_irq_error(u32 irq_status)
>>          return 0;
>>   }
>>
>> -static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>> +static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
>>   {
>> -       u32 irq_status, status_ack = 0, command = 0;
>> +       u32 status_ack = 0, command = 0;
>>          struct i2c_msg *msg;
>>          u8 recv_byte;
>>          int ret;
>>
>> -       irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
>> -       /* Ack all interrupt bits. */
>> -       writel(irq_status, bus->base + ASPEED_I2C_INTR_STS_REG);
>> -
>>          if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) {
>>                  bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
>>                  status_ack |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE;
>>                  goto out_complete;
>> +       } else {
>> +               /* Master is not currently active, irq was for someone else. */
>> +               if (bus->master_state == ASPEED_I2C_MASTER_INACTIVE)
>> +                       goto out_no_complete;
>>          }
>>
>>          /*
>> @@ -403,19 +395,22 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>>           * INACTIVE state.
>>           */
>>          ret = aspeed_i2c_is_irq_error(irq_status);
>> -       if (ret < 0) {
>> +       if (ret) {
>>                  dev_dbg(bus->dev, "received error interrupt: 0x%08x\n",
>>                          irq_status);
>>                  bus->cmd_err = ret;
>>                  bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
>> +               status_ack |= (irq_status & ASPEED_I2CD_INTR_MASTER_ERRORS);
>>                  goto out_complete;
>>          }
>>
>>          /* We are in an invalid state; reset bus to a known state. */
>>          if (!bus->msgs) {
>> -               dev_err(bus->dev, "bus in unknown state\n");
>> +               dev_err(bus->dev, "bus in unknown state irq_status: 0x%x\n",
>> +                       irq_status);
>>                  bus->cmd_err = -EIO;
>> -               if (bus->master_state != ASPEED_I2C_MASTER_STOP)
>> +               if (bus->master_state != ASPEED_I2C_MASTER_STOP &&
>> +                   bus->master_state != ASPEED_I2C_MASTER_INACTIVE)
>>                          aspeed_i2c_do_stop(bus);
>>                  goto out_no_complete;
>>          }
>> @@ -428,6 +423,11 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>>           */
>>          if (bus->master_state == ASPEED_I2C_MASTER_START) {
>>                  if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
>> +                       if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_NAK))) {
>> +                               bus->cmd_err = -ENXIO;
>> +                               bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
>> +                               goto out_complete;
>> +                       }
>>                          pr_devel("no slave present at %02x\n", msg->addr);
>>                          status_ack |= ASPEED_I2CD_INTR_TX_NAK;
>>                          bus->cmd_err = -ENXIO;
>> @@ -506,7 +506,9 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>>                  goto out_no_complete;
>>          case ASPEED_I2C_MASTER_STOP:
>>                  if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) {
>> -                       dev_err(bus->dev, "master failed to STOP\n");
>> +                       dev_err(bus->dev,
>> +                               "master failed to STOP irq_status:0x%x\n",
>> +                               irq_status);
>>                          bus->cmd_err = -EIO;
>>                          /* Do not STOP as we have already tried. */
>>                  } else {
>> @@ -540,33 +542,51 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
>>                  bus->master_xfer_result = bus->msgs_index + 1;
>>          complete(&bus->cmd_complete);
>>   out_no_complete:
>> -       if (irq_status != status_ack)
>> -               dev_err(bus->dev,
>> -                       "irq handled != irq. expected 0x%08x, but was 0x%08x\n",
>> -                       irq_status, status_ack);
>> -       return !!irq_status;
>> +       return status_ack;
>>   }
>>
>>   static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
>>   {
>>          struct aspeed_i2c_bus *bus = dev_id;
>> -       bool ret;
>> +       u32 irq_received, irq_status, irq_acked;
>>
>>          spin_lock(&bus->lock);
>> +       irq_received = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
>> +       irq_status = irq_received;
>>
>>   #if IS_ENABLED(CONFIG_I2C_SLAVE)
>> -       if (aspeed_i2c_slave_irq(bus)) {
>> -               dev_dbg(bus->dev, "irq handled by slave.\n");
>> -               ret = true;
>> -               goto out;
>> +       /*
>> +        * In most cases, interrupt bits will be set one by one, although
>> +        * multiple interrupt bits could be set at the same time. It's also
>> +        * possible that master interrupt bits could be set along with slave
>> +        * interrupt bits. Each case needs to be handled using corresponding
>> +        * handlers depending on the current state.
>> +        */
>> +       if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE) {
>> +               irq_acked = aspeed_i2c_master_irq(bus, irq_status);
>> +               irq_status &= ~irq_acked;
>> +               if (irq_status)
>> +                       irq_acked = aspeed_i2c_slave_irq(bus, irq_status);
>> +       } else {
>> +               irq_acked = aspeed_i2c_slave_irq(bus, irq_status);
>> +               irq_status &= ~irq_acked;
>> +               if (irq_status)
>> +                       irq_acked = aspeed_i2c_master_irq(bus, irq_status);
>>          }
>> +#else
>> +       irq_acked = aspeed_i2c_master_irq(bus, irq_status);
>>   #endif /* CONFIG_I2C_SLAVE */
>>
>> -       ret = aspeed_i2c_master_irq(bus);
>> +       irq_status &= ~irq_acked;
>> +       if (irq_status)
>> +               dev_err(bus->dev,
>> +                       "irq handled != irq. expected 0x%08x, but was 0x%08x\n",
>> +                       irq_received, irq_received ^ irq_status);
> 
> I think you want to use `irq_acked` here.
> 

Yes, right. I'll fix the message printing. Thanks for your pointing it out.

>>
>> -out:
>> +       /* Ack all interrupt bits. */
>> +       writel(irq_received, bus->base + ASPEED_I2C_INTR_STS_REG);
>>          spin_unlock(&bus->lock);
>> -       return ret ? IRQ_HANDLED : IRQ_NONE;
>> +       return irq_status ? IRQ_NONE : IRQ_HANDLED;
>>   }
>>
>>   static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
>> --
>> 2.18.0
>>
> 
> One minor issue and then I think we are good to go!
> 
> Also, sorry about not reviewing your last patch. I missed it apparently.
> 
> Feel free to mark the next patch "Reviewed-by: Brendan Higgins
> <brendanhiggins@google.com>"
> 
> Cheers
> 

Thanks a lot for your review. I really appreciate it. Will submit the v5 
patch soon.

Jae
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index a4f956c6d567..09eb4a9b355c 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -82,6 +82,11 @@ 
 #define ASPEED_I2CD_INTR_RX_DONE			BIT(2)
 #define ASPEED_I2CD_INTR_TX_NAK				BIT(1)
 #define ASPEED_I2CD_INTR_TX_ACK				BIT(0)
+#define ASPEED_I2CD_INTR_MASTER_ERRORS					       \
+		(ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |			       \
+		 ASPEED_I2CD_INTR_SCL_TIMEOUT |				       \
+		 ASPEED_I2CD_INTR_ABNORMAL |				       \
+		 ASPEED_I2CD_INTR_ARBIT_LOSS)
 #define ASPEED_I2CD_INTR_ALL						       \
 		(ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |			       \
 		 ASPEED_I2CD_INTR_BUS_RECOVER_DONE |			       \
@@ -227,20 +232,16 @@  static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
 }
 
 #if IS_ENABLED(CONFIG_I2C_SLAVE)
-static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
+static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 {
-	u32 command, irq_status, status_ack = 0;
+	u32 command, status_ack = 0;
 	struct i2c_client *slave = bus->slave;
-	bool irq_handled = true;
 	u8 value;
 
-	if (!slave) {
-		irq_handled = false;
-		goto out;
-	}
+	if (!slave)
+		return 0;
 
 	command = readl(bus->base + ASPEED_I2C_CMD_REG);
-	irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
 
 	/* Slave was requested, restart state machine. */
 	if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
@@ -249,10 +250,8 @@  static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
 	}
 
 	/* Slave is not currently active, irq was for someone else. */
-	if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
-		irq_handled = false;
-		goto out;
-	}
+	if (bus->slave_state == ASPEED_I2C_SLAVE_STOP)
+		return status_ack;
 
 	dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
 		irq_status, command);
@@ -281,19 +280,19 @@  static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
 		status_ack |= ASPEED_I2CD_INTR_TX_NAK;
 		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
 	}
+	if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
+		status_ack |= ASPEED_I2CD_INTR_TX_ACK;
 
 	switch (bus->slave_state) {
 	case ASPEED_I2C_SLAVE_READ_REQUESTED:
 		if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
 			dev_err(bus->dev, "Unexpected ACK on read request.\n");
 		bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
-
 		i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
 		writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
 		writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
 		break;
 	case ASPEED_I2C_SLAVE_READ_PROCESSED:
-		status_ack |= ASPEED_I2CD_INTR_TX_ACK;
 		if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK))
 			dev_err(bus->dev,
 				"Expected ACK after processed read.\n");
@@ -317,14 +316,7 @@  static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
 		break;
 	}
 
-	if (status_ack != irq_status)
-		dev_err(bus->dev,
-			"irq handled != irq. expected %x, but was %x\n",
-			irq_status, status_ack);
-	writel(status_ack, bus->base + ASPEED_I2C_INTR_STS_REG);
-
-out:
-	return irq_handled;
+	return status_ack;
 }
 #endif /* CONFIG_I2C_SLAVE */
 
@@ -380,21 +372,21 @@  static int aspeed_i2c_is_irq_error(u32 irq_status)
 	return 0;
 }
 
-static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
+static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 {
-	u32 irq_status, status_ack = 0, command = 0;
+	u32 status_ack = 0, command = 0;
 	struct i2c_msg *msg;
 	u8 recv_byte;
 	int ret;
 
-	irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
-	/* Ack all interrupt bits. */
-	writel(irq_status, bus->base + ASPEED_I2C_INTR_STS_REG);
-
 	if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) {
 		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
 		status_ack |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE;
 		goto out_complete;
+	} else {
+		/* Master is not currently active, irq was for someone else. */
+		if (bus->master_state == ASPEED_I2C_MASTER_INACTIVE)
+			goto out_no_complete;
 	}
 
 	/*
@@ -403,19 +395,22 @@  static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
 	 * INACTIVE state.
 	 */
 	ret = aspeed_i2c_is_irq_error(irq_status);
-	if (ret < 0) {
+	if (ret) {
 		dev_dbg(bus->dev, "received error interrupt: 0x%08x\n",
 			irq_status);
 		bus->cmd_err = ret;
 		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+		status_ack |= (irq_status & ASPEED_I2CD_INTR_MASTER_ERRORS);
 		goto out_complete;
 	}
 
 	/* We are in an invalid state; reset bus to a known state. */
 	if (!bus->msgs) {
-		dev_err(bus->dev, "bus in unknown state\n");
+		dev_err(bus->dev, "bus in unknown state irq_status: 0x%x\n",
+			irq_status);
 		bus->cmd_err = -EIO;
-		if (bus->master_state != ASPEED_I2C_MASTER_STOP)
+		if (bus->master_state != ASPEED_I2C_MASTER_STOP &&
+		    bus->master_state != ASPEED_I2C_MASTER_INACTIVE)
 			aspeed_i2c_do_stop(bus);
 		goto out_no_complete;
 	}
@@ -428,6 +423,11 @@  static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
 	 */
 	if (bus->master_state == ASPEED_I2C_MASTER_START) {
 		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
+			if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_NAK))) {
+				bus->cmd_err = -ENXIO;
+				bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+				goto out_complete;
+			}
 			pr_devel("no slave present at %02x\n", msg->addr);
 			status_ack |= ASPEED_I2CD_INTR_TX_NAK;
 			bus->cmd_err = -ENXIO;
@@ -506,7 +506,9 @@  static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
 		goto out_no_complete;
 	case ASPEED_I2C_MASTER_STOP:
 		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) {
-			dev_err(bus->dev, "master failed to STOP\n");
+			dev_err(bus->dev,
+				"master failed to STOP irq_status:0x%x\n",
+				irq_status);
 			bus->cmd_err = -EIO;
 			/* Do not STOP as we have already tried. */
 		} else {
@@ -540,33 +542,51 @@  static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
 		bus->master_xfer_result = bus->msgs_index + 1;
 	complete(&bus->cmd_complete);
 out_no_complete:
-	if (irq_status != status_ack)
-		dev_err(bus->dev,
-			"irq handled != irq. expected 0x%08x, but was 0x%08x\n",
-			irq_status, status_ack);
-	return !!irq_status;
+	return status_ack;
 }
 
 static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
 {
 	struct aspeed_i2c_bus *bus = dev_id;
-	bool ret;
+	u32 irq_received, irq_status, irq_acked;
 
 	spin_lock(&bus->lock);
+	irq_received = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
+	irq_status = irq_received;
 
 #if IS_ENABLED(CONFIG_I2C_SLAVE)
-	if (aspeed_i2c_slave_irq(bus)) {
-		dev_dbg(bus->dev, "irq handled by slave.\n");
-		ret = true;
-		goto out;
+	/*
+	 * In most cases, interrupt bits will be set one by one, although
+	 * multiple interrupt bits could be set at the same time. It's also
+	 * possible that master interrupt bits could be set along with slave
+	 * interrupt bits. Each case needs to be handled using corresponding
+	 * handlers depending on the current state.
+	 */
+	if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE) {
+		irq_acked = aspeed_i2c_master_irq(bus, irq_status);
+		irq_status &= ~irq_acked;
+		if (irq_status)
+			irq_acked = aspeed_i2c_slave_irq(bus, irq_status);
+	} else {
+		irq_acked = aspeed_i2c_slave_irq(bus, irq_status);
+		irq_status &= ~irq_acked;
+		if (irq_status)
+			irq_acked = aspeed_i2c_master_irq(bus, irq_status);
 	}
+#else
+	irq_acked = aspeed_i2c_master_irq(bus, irq_status);
 #endif /* CONFIG_I2C_SLAVE */
 
-	ret = aspeed_i2c_master_irq(bus);
+	irq_status &= ~irq_acked;
+	if (irq_status)
+		dev_err(bus->dev,
+			"irq handled != irq. expected 0x%08x, but was 0x%08x\n",
+			irq_received, irq_received ^ irq_status);
 
-out:
+	/* Ack all interrupt bits. */
+	writel(irq_received, bus->base + ASPEED_I2C_INTR_STS_REG);
 	spin_unlock(&bus->lock);
-	return ret ? IRQ_HANDLED : IRQ_NONE;
+	return irq_status ? IRQ_NONE : IRQ_HANDLED;
 }
 
 static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,