diff mbox series

[v1] arm64: dts: ls1043a: Add configure-gfladj property to USB3 node

Message ID 20180828101213.25750-1-yinbo.zhu@nxp.com (mailing list archive)
State New, archived
Headers show
Series [v1] arm64: dts: ls1043a: Add configure-gfladj property to USB3 node | expand

Commit Message

Yinbo Zhu Aug. 28, 2018, 10:12 a.m. UTC 
From: Rajesh Bhagat <rajesh.bhagat@freescale.com>

Add "configure-gfladj" boolean property to USB3 node. This property
is used to determine whether frame length adjustent is required or
not

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

Comments

Fabio Estevam Aug. 28, 2018, 10:30 a.m. UTC | #1 
On Tue, Aug 28, 2018 at 7:12 AM, Yinbo Zhu <yinbo.zhu@nxp.com> wrote:
> From: Rajesh Bhagat <rajesh.bhagat@freescale.com>

freescale.com addresses are no longer valid.

The From and the first Signed-off-by lines should match, so use
nxp.com here instead.

> Add "configure-gfladj" boolean property to USB3 node. This property

I don't find any dt-binding doc for this property.

> is used to determine whether frame length adjustent is required or
> not
>
> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>

You missed to add your Signed-off-by tag.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index a830a2e..a3c5165 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -610,6 +610,7 @@ 
 			snps,dis-u1u2-when-u3-quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 			dma-coherent;
+			configure-gfladj;
 		};
 
 		usb1: usb3@3000000 {
@@ -623,6 +624,7 @@ 
 			snps,dis-u1u2-when-u3-quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 			dma-coherent;
+			configure-gfladj;
 		};
 
 		usb2: usb3@3100000 {
@@ -636,6 +638,7 @@ 
 			snps,dis-u1u2-when-u3-quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 			dma-coherent;
+			configure-gfladj;
 		};
 
 		sata: sata@3200000 {