diff mbox series

[v5,04/14] irqchip/irq-mvebu-icu: clarify the reset operation of configured interrupts

Message ID 20180830073535.10710-5-miquel.raynal@bootlin.com (mailing list archive)
State Superseded, archived
Headers show
Series Add System Error Interrupt support to Armada SoCs | expand

Commit Message

Miquel Raynal Aug. 30, 2018, 7:35 a.m. UTC 
Rewrite a small section to clarify the reset operation of interrupts
already configured by ATF that we want to handle in the driver. This
will simplify the introduction of System Error Interrupts support.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
 drivers/irqchip/irq-mvebu-icu.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/irqchip/irq-mvebu-icu.c b/drivers/irqchip/irq-mvebu-icu.c
index a2a3acd74491..0f2655d7f19e 100644
--- a/drivers/irqchip/irq-mvebu-icu.c
+++ b/drivers/irqchip/irq-mvebu-icu.c
@@ -258,8 +258,12 @@  static int mvebu_icu_probe(struct platform_device *pdev)
 	 * avoid unpredictable SPI assignments done by firmware.
 	 */
 	for (i = 0 ; i < ICU_MAX_IRQS ; i++) {
-		u32 icu_int = readl_relaxed(icu->base + ICU_INT_CFG(i));
-		if ((icu_int >> ICU_GROUP_SHIFT) == ICU_GRP_NSR)
+		u32 icu_int, icu_grp;
+
+		icu_int = readl_relaxed(icu->base + ICU_INT_CFG(i));
+		icu_grp = icu_int >> ICU_GROUP_SHIFT;
+
+		if (icu_grp == ICU_GRP_NSR)
 			writel_relaxed(0x0, icu->base + ICU_INT_CFG(i));
 	}