Message ID | 20180830081501.11569-2-miquel.raynal@bootlin.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [RESEND,1/4] arm64: dts: marvell: move AP806/CP110 thermal nodes into a new syscon | expand |
Hi Miquel, On jeu., août 30 2018, Miquel Raynal <miquel.raynal@bootlin.com> wrote: > Add a thermal-zone node and fill in all the sensors available in an > ap806 (one in the IC plus one per CPU). > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Applied on mvebu/dt64 Thanks, Gregory > --- > arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 60 +++++++++++++++++++ > 1 file changed, 60 insertions(+) > > diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi > index 3da3a13f7ee1..7d94c1fa592a 100644 > --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi > +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi > @@ -6,6 +6,7 @@ > */ > > #include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/thermal/thermal.h> > > /dts-v1/; > > @@ -265,8 +266,67 @@ > ap_thermal: thermal-sensor@80 { > compatible = "marvell,armada-ap806-thermal"; > reg = <0x80 0x10>; > + #thermal-sensor-cells = <1>; > }; > }; > }; > }; > + > + /* > + * The thermal IP features one internal sensor plus, if applicable, one > + * remote channel wired to one sensor per CPU. > + * > + * The cooling maps are always empty as there are no cooling devices. > + */ > + thermal-zones { > + ap_thermal_ic: ap-thermal-ic { > + polling-delay-passive = <1000>; > + polling-delay = <1000>; > + > + thermal-sensors = <&ap_thermal 0>; > + > + trips { }; > + cooling-maps { }; > + }; > + > + ap_thermal_cpu1: ap-thermal-cpu1 { > + polling-delay-passive = <1000>; > + polling-delay = <1000>; > + > + thermal-sensors = <&ap_thermal 1>; > + > + trips { }; > + cooling-maps { }; > + }; > + > + ap_thermal_cpu2: ap-thermal-cpu2 { > + polling-delay-passive = <1000>; > + polling-delay = <1000>; > + > + thermal-sensors = <&ap_thermal 2>; > + > + trips { }; > + cooling-maps { }; > + }; > + > + ap_thermal_cpu3: ap-thermal-cpu3 { > + polling-delay-passive = <1000>; > + polling-delay = <1000>; > + > + thermal-sensors = <&ap_thermal 3>; > + > + trips { }; > + cooling-maps { }; > + }; > + > + ap_thermal_cpu4: ap-thermal-cpu4 { > + polling-delay-passive = <1000>; > + polling-delay = <1000>; > + > + thermal-sensors = <&ap_thermal 4>; > + > + trips { }; > + cooling-maps { }; > + }; > + }; > }; > -- > 2.17.1 >
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 3da3a13f7ee1..7d94c1fa592a 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> /dts-v1/; @@ -265,8 +266,67 @@ ap_thermal: thermal-sensor@80 { compatible = "marvell,armada-ap806-thermal"; reg = <0x80 0x10>; + #thermal-sensor-cells = <1>; }; }; }; }; + + /* + * The thermal IP features one internal sensor plus, if applicable, one + * remote channel wired to one sensor per CPU. + * + * The cooling maps are always empty as there are no cooling devices. + */ + thermal-zones { + ap_thermal_ic: ap-thermal-ic { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 0>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu1: ap-thermal-cpu1 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 1>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu2: ap-thermal-cpu2 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 2>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu3: ap-thermal-cpu3 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 3>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu4: ap-thermal-cpu4 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 4>; + + trips { }; + cooling-maps { }; + }; + }; };
Add a thermal-zone node and fill in all the sensors available in an ap806 (one in the IC plus one per CPU). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+)