| Message ID | 20180903140840.23648-1-alexandre.belloni@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/5] arm64: dts: fsl: use a generic node name for m25p80 flashes | expand |
The series looks good to me. @Leo, what about you? Shawn On Mon, Sep 03, 2018 at 04:08:36PM +0200, Alexandre Belloni wrote: > Use a generic node name for the m25p80 flashes on ls1043 and ls1046 boards. > > Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> > --- > arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 2 +- > arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +- > arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++-- > 3 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts > index c7b8d2c009cd..af972e91d6bc 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts > @@ -136,7 +136,7 @@ > bus-num = <0>; > status = "okay"; > > - qflash0: s25fl128s@0 { > + qflash0: flash@0 { > compatible = "spansion,m25p80"; > #address-cells = <1>; > #size-cells = <1>; > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts > index e69306e6b0b1..219068220b84 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts > @@ -165,7 +165,7 @@ > bus-num = <0>; > status = "okay"; > > - qflash0: s25fl128s@0 { > + qflash0: flash@0 { > compatible = "spansion,m25p80"; > #address-cells = <1>; > #size-cells = <1>; > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts > index 440e111651d5..df676b30357b 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts > @@ -103,7 +103,7 @@ > bus-num = <0>; > status = "okay"; > > - qflash0: s25fs512s@0 { > + qflash0: flash@0 { > compatible = "spansion,m25p80"; > #address-cells = <1>; > #size-cells = <1>; > @@ -111,7 +111,7 @@ > reg = <0>; > }; > > - qflash1: s25fs512s@1 { > + qflash1: flash@1 { > compatible = "spansion,m25p80"; > #address-cells = <1>; > #size-cells = <1>; > -- > 2.19.0.rc1 >
On Sun, Sep 9, 2018 at 10:11 PM Shawn Guo <shawnguo@kernel.org> wrote: > > The series looks good to me. @Leo, what about you? Looks fine to me too. Acked-by: Li Yang <leoyang.li@nxp.com> > > Shawn > > On Mon, Sep 03, 2018 at 04:08:36PM +0200, Alexandre Belloni wrote: > > Use a generic node name for the m25p80 flashes on ls1043 and ls1046 boards. > > > > Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> > > --- > > arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 2 +- > > arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +- > > arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++-- > > 3 files changed, 4 insertions(+), 4 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts > > index c7b8d2c009cd..af972e91d6bc 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts > > @@ -136,7 +136,7 @@ > > bus-num = <0>; > > status = "okay"; > > > > - qflash0: s25fl128s@0 { > > + qflash0: flash@0 { > > compatible = "spansion,m25p80"; > > #address-cells = <1>; > > #size-cells = <1>; > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts > > index e69306e6b0b1..219068220b84 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts > > @@ -165,7 +165,7 @@ > > bus-num = <0>; > > status = "okay"; > > > > - qflash0: s25fl128s@0 { > > + qflash0: flash@0 { > > compatible = "spansion,m25p80"; > > #address-cells = <1>; > > #size-cells = <1>; > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts > > index 440e111651d5..df676b30357b 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts > > @@ -103,7 +103,7 @@ > > bus-num = <0>; > > status = "okay"; > > > > - qflash0: s25fs512s@0 { > > + qflash0: flash@0 { > > compatible = "spansion,m25p80"; > > #address-cells = <1>; > > #size-cells = <1>; > > @@ -111,7 +111,7 @@ > > reg = <0>; > > }; > > > > - qflash1: s25fs512s@1 { > > + qflash1: flash@1 { > > compatible = "spansion,m25p80"; > > #address-cells = <1>; > > #size-cells = <1>; > > -- > > 2.19.0.rc1 > >
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index c7b8d2c009cd..af972e91d6bc 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -136,7 +136,7 @@ bus-num = <0>; status = "okay"; - qflash0: s25fl128s@0 { + qflash0: flash@0 { compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index e69306e6b0b1..219068220b84 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -165,7 +165,7 @@ bus-num = <0>; status = "okay"; - qflash0: s25fl128s@0 { + qflash0: flash@0 { compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index 440e111651d5..df676b30357b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -103,7 +103,7 @@ bus-num = <0>; status = "okay"; - qflash0: s25fs512s@0 { + qflash0: flash@0 { compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>; @@ -111,7 +111,7 @@ reg = <0>; }; - qflash1: s25fs512s@1 { + qflash1: flash@1 { compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>;
Use a generic node name for the m25p80 flashes on ls1043 and ls1046 boards. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 2 +- arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +- arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-)