| Message ID | 20180906153947.19495-1-katsuhiro@katsuster.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: rockchip: fix vcc_host1_5v pin assign | expand |
Am Donnerstag, 6. September 2018, 17:39:47 CEST schrieb Katsuhiro Suzuki: > This patch fixes pin assign of vcc_host1_5v. This regulator is > controlled by USB20_HOST_DRV signal. > > ROCK64 schematic says that GPIO0_A2 pin is used as USB20_HOST_DRV. > GPIO0_D3 pin is for SPDIF_TX_M0. > > ROCK64 schematic: > http://files.pine64.org/doc/rock64/ROCK64_Schematic_v2.0_20171019.pdf > > Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> applied for 4.20 after adapting the subject to also list the actual board this affects :-) . Thanks Heiko
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 5272e887a434..5852061e497b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -46,7 +46,7 @@ vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb20_host_drv>; regulator-name = "vcc_host1_5v"; @@ -238,7 +238,7 @@ usb2 { usb20_host_drv: usb20-host-drv { - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; };
This patch fixes pin assign of vcc_host1_5v. This regulator is controlled by USB20_HOST_DRV signal. ROCK64 schematic says that GPIO0_A2 pin is used as USB20_HOST_DRV. GPIO0_D3 pin is for SPDIF_TX_M0. ROCK64 schematic: http://files.pine64.org/doc/rock64/ROCK64_Schematic_v2.0_20171019.pdf Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> --- arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)