@@ -1320,6 +1320,20 @@ config SENSORS_PECI_CPUTEMP
This driver can also be built as a module. If so, the module
will be called peci-cputemp.
+config SENSORS_PECI_DIMMTEMP
+ tristate "PECI DIMM temperature monitoring support"
+ depends on PECI
+ select MFD_INTEL_PECI_CLIENT
+ help
+ If you say yes here you get support for the generic Intel PECI hwmon
+ driver which provides Digital Thermal Sensor (DTS) thermal readings of
+ DIMM components that are accessible using the PECI Client Command
+ Suite via the processor PECI client.
+ Check Documentation/hwmon/peci-dimmtemp for details.
+
+ This driver can also be built as a module. If so, the module
+ will be called peci-dimmtemp.
+
source drivers/hwmon/pmbus/Kconfig
config SENSORS_PWM_FAN
@@ -142,6 +142,7 @@ obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o
+obj-$(CONFIG_SENSORS_PECI_DIMMTEMP) += peci-dimmtemp.o
obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o
obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o
obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o
new file mode 100644
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/hwmon.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/intel-peci-client.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+#define DIMM_MASK_CHECK_DELAY_JIFFIES msecs_to_jiffies(5000)
+#define DIMM_MASK_CHECK_RETRY_MAX 60 /* 60 x 5 secs = 5 minutes */
+
+struct peci_dimmtemp {
+ struct peci_mfd *mfd;
+ struct device *dev;
+ char name[PECI_NAME_SIZE];
+ u8 addr;
+ const struct cpu_gen_info *gen_info;
+ struct workqueue_struct *work_queue;
+ struct delayed_work work_handler;
+ struct temp_data temp[DIMM_NUMS_MAX];
+ u32 dimm_mask;
+ int retry_count;
+ u32 temp_config[DIMM_NUMS_MAX + 1];
+ struct hwmon_channel_info temp_info;
+ const struct hwmon_channel_info *info[2];
+ struct hwmon_chip_info chip;
+};
+
+static const char *dimmtemp_label[CHAN_RANK_MAX][DIMM_IDX_MAX] = {
+ { "DIMM A1", "DIMM A2", "DIMM A3" },
+ { "DIMM B1", "DIMM B2", "DIMM B3" },
+ { "DIMM C1", "DIMM C2", "DIMM C3" },
+ { "DIMM D1", "DIMM D2", "DIMM D3" },
+ { "DIMM E1", "DIMM E2", "DIMM E3" },
+ { "DIMM F1", "DIMM F2", "DIMM F3" },
+ { "DIMM G1", "DIMM G2", "DIMM G3" },
+ { "DIMM H1", "DIMM H2", "DIMM H3" },
+};
+
+static int get_dimm_temp(struct peci_dimmtemp *priv, int dimm_no)
+{
+ int dimm_order = dimm_no % priv->gen_info->dimm_idx_max;
+ int chan_rank = dimm_no / priv->gen_info->dimm_idx_max;
+ u8 cfg_data[4];
+ int rc;
+
+ if (!peci_temp_need_update(&priv->temp[dimm_no]))
+ return 0;
+
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd, MBX_INDEX_DDR_DIMM_TEMP,
+ chan_rank, cfg_data);
+ if (rc)
+ return rc;
+
+ priv->temp[dimm_no].value = cfg_data[dimm_order] * 1000;
+
+ peci_temp_mark_updated(&priv->temp[dimm_no]);
+
+ return 0;
+}
+
+static int dimmtemp_read_string(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ struct peci_dimmtemp *priv = dev_get_drvdata(dev);
+ u32 dimm_idx_max = priv->gen_info->dimm_idx_max;
+ int chan_rank, dimm_idx;
+
+ if (attr != hwmon_temp_label)
+ return -EOPNOTSUPP;
+
+ chan_rank = channel / dimm_idx_max;
+ dimm_idx = channel % dimm_idx_max;
+ *str = dimmtemp_label[chan_rank][dimm_idx];
+ return 0;
+}
+
+static int dimmtemp_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct peci_dimmtemp *priv = dev_get_drvdata(dev);
+ int rc;
+
+ if (attr != hwmon_temp_input)
+ return -EOPNOTSUPP;
+
+ rc = get_dimm_temp(priv, channel);
+ if (rc)
+ return rc;
+
+ *val = priv->temp[channel].value;
+ return 0;
+}
+
+static umode_t dimmtemp_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct peci_dimmtemp *priv = data;
+
+ if (priv->temp_config[channel] & BIT(attr) &&
+ priv->dimm_mask & BIT(channel))
+ return 0444;
+
+ return 0;
+}
+
+static const struct hwmon_ops dimmtemp_ops = {
+ .is_visible = dimmtemp_is_visible,
+ .read_string = dimmtemp_read_string,
+ .read = dimmtemp_read,
+};
+
+static int check_populated_dimms(struct peci_dimmtemp *priv)
+{
+ u32 chan_rank_max = priv->gen_info->chan_rank_max;
+ u32 dimm_idx_max = priv->gen_info->dimm_idx_max;
+ int chan_rank, dimm_idx, rc;
+ u8 cfg_data[4];
+
+ for (chan_rank = 0; chan_rank < chan_rank_max; chan_rank++) {
+ rc = peci_client_rd_pkg_cfg_cmd(priv->mfd,
+ MBX_INDEX_DDR_DIMM_TEMP,
+ chan_rank, cfg_data);
+ if (rc) {
+ priv->dimm_mask = 0;
+ return rc;
+ }
+
+ for (dimm_idx = 0; dimm_idx < dimm_idx_max; dimm_idx++)
+ if (cfg_data[dimm_idx])
+ priv->dimm_mask |= BIT(chan_rank *
+ dimm_idx_max +
+ dimm_idx);
+ }
+
+ if (!priv->dimm_mask)
+ return -EAGAIN;
+
+ dev_dbg(priv->dev, "Scanned populated DIMMs: 0x%x\n", priv->dimm_mask);
+ return 0;
+}
+
+static int create_dimm_temp_info(struct peci_dimmtemp *priv)
+{
+ int rc, i, config_idx, channels;
+ struct device *hwmon_dev;
+
+ rc = check_populated_dimms(priv);
+ if (rc) {
+ if (rc == -EAGAIN) {
+ if (priv->retry_count < DIMM_MASK_CHECK_RETRY_MAX) {
+ queue_delayed_work(priv->work_queue,
+ &priv->work_handler,
+ DIMM_MASK_CHECK_DELAY_JIFFIES);
+ priv->retry_count++;
+ dev_dbg(priv->dev,
+ "Deferred DIMM temp info creation\n");
+ } else {
+ dev_err(priv->dev,
+ "Timeout DIMM temp info creation\n");
+ rc = -ETIMEDOUT;
+ }
+ }
+
+ return rc;
+ }
+
+ channels = priv->gen_info->chan_rank_max *
+ priv->gen_info->dimm_idx_max;
+ for (i = 0, config_idx = 0; i < channels; i++)
+ if (priv->dimm_mask & BIT(i))
+ while (i >= config_idx)
+ priv->temp_config[config_idx++] =
+ HWMON_T_LABEL | HWMON_T_INPUT;
+
+ priv->chip.ops = &dimmtemp_ops;
+ priv->chip.info = priv->info;
+
+ priv->info[0] = &priv->temp_info;
+
+ priv->temp_info.type = hwmon_temp;
+ priv->temp_info.config = priv->temp_config;
+
+ hwmon_dev = devm_hwmon_device_register_with_info(priv->dev,
+ priv->name,
+ priv,
+ &priv->chip,
+ NULL);
+ rc = PTR_ERR_OR_ZERO(hwmon_dev);
+ if (!rc)
+ dev_dbg(priv->dev, "%s: sensor '%s'\n",
+ dev_name(hwmon_dev), priv->name);
+
+ return rc;
+}
+
+static void create_dimm_temp_info_delayed(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct peci_dimmtemp *priv = container_of(dwork, struct peci_dimmtemp,
+ work_handler);
+ int rc;
+
+ rc = create_dimm_temp_info(priv);
+ if (rc && rc != -EAGAIN)
+ dev_dbg(priv->dev, "Failed to create DIMM temp info\n");
+}
+
+static int peci_dimmtemp_probe(struct platform_device *pdev)
+{
+ struct peci_mfd *mfd = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct peci_dimmtemp *priv;
+ int rc;
+
+ if ((mfd->adapter->cmd_mask &
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) !=
+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG)))
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, priv);
+ priv->mfd = mfd;
+ priv->dev = dev;
+ priv->addr = mfd->addr;
+ priv->gen_info = mfd->gen_info;
+
+ snprintf(priv->name, PECI_NAME_SIZE, "peci_dimmtemp.cpu%d",
+ priv->mfd->cpu_no);
+
+ priv->work_queue = alloc_ordered_workqueue(priv->name, 0);
+ if (!priv->work_queue)
+ return -ENOMEM;
+
+ INIT_DELAYED_WORK(&priv->work_handler, create_dimm_temp_info_delayed);
+
+ rc = create_dimm_temp_info(priv);
+ if (rc && rc != -EAGAIN) {
+ dev_err(dev, "Failed to create DIMM temp info\n");
+ goto err_free_wq;
+ }
+
+ return 0;
+
+err_free_wq:
+ destroy_workqueue(priv->work_queue);
+ return rc;
+}
+
+static int peci_dimmtemp_remove(struct platform_device *pdev)
+{
+ struct peci_dimmtemp *priv = dev_get_drvdata(&pdev->dev);
+
+ cancel_delayed_work_sync(&priv->work_handler);
+ destroy_workqueue(priv->work_queue);
+
+ return 0;
+}
+
+static const struct platform_device_id peci_dimmtemp_ids[] = {
+ { .name = "peci-dimmtemp", .driver_data = 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, peci_dimmtemp_ids);
+
+static struct platform_driver peci_dimmtemp_driver = {
+ .probe = peci_dimmtemp_probe,
+ .remove = peci_dimmtemp_remove,
+ .id_table = peci_dimmtemp_ids,
+ .driver = {
+ .name = "peci-dimmtemp",
+ },
+};
+module_platform_driver(peci_dimmtemp_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("PECI dimmtemp driver");
+MODULE_LICENSE("GPL v2");