@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3066a-cru.h>
+#include <dt-bindings/power/rk3066-power.h>
#include "rk3xxx.dtsi"
/ {
@@ -595,6 +596,7 @@
"ppmmu2",
"pp3",
"ppmmu3";
+ power-domains = <&power RK3066_PD_GPU>;
};
&i2c0 {
@@ -643,6 +645,56 @@
dma-names = "rx-tx";
};
+&pmu {
+ power: power-controller {
+ compatible = "rockchip,rk3066-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_vio@RK3066_PD_VIO {
+ reg = <RK3066_PD_VIO>;
+ clocks = <&cru ACLK_LCDC0>,
+ <&cru ACLK_LCDC1>,
+ <&cru DCLK_LCDC0>,
+ <&cru DCLK_LCDC1>,
+ <&cru HCLK_LCDC0>,
+ <&cru HCLK_LCDC1>,
+ <&cru SCLK_CIF1>,
+ <&cru ACLK_CIF1>,
+ <&cru HCLK_CIF1>,
+ <&cru SCLK_CIF0>,
+ <&cru ACLK_CIF0>,
+ <&cru HCLK_CIF0>,
+ <&cru ACLK_IPP>,
+ <&cru HCLK_IPP>,
+ <&cru ACLK_RGA>,
+ <&cru HCLK_RGA>;
+ pm_qos = <&qos_lcdc0>,
+ <&qos_lcdc1>,
+ <&qos_cif0>,
+ <&qos_cif1>,
+ <&qos_ipp>,
+ <&qos_rga>;
+ };
+
+ pd_video@RK3066_PD_VIDEO {
+ reg = <RK3066_PD_VIDEO>;
+ clocks = <&cru ACLK_VDPU>,
+ <&cru ACLK_VEPU>,
+ <&cru HCLK_VDPU>,
+ <&cru HCLK_VEPU>;
+ pm_qos = <&qos_vpu>;
+ };
+
+ pd_gpu@RK3066_PD_GPU {
+ reg = <RK3066_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ pm_qos = <&qos_gpu>;
+ };
+ };
+};
+
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_out>;
@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3188-cru.h>
+#include <dt-bindings/power/rk3188-power.h>
#include "rk3xxx.dtsi"
/ {
@@ -80,6 +81,7 @@
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_LCDC0>, <&cru DCLK_LCDC0>, <&cru HCLK_LCDC0>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3188_PD_VIO>;
resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
reset-names = "axi", "ahb", "dclk";
status = "disabled";
@@ -96,6 +98,7 @@
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_LCDC1>, <&cru DCLK_LCDC1>, <&cru HCLK_LCDC1>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3188_PD_VIO>;
resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
reset-names = "axi", "ahb", "dclk";
status = "disabled";
@@ -620,6 +623,7 @@
"ppmmu2",
"pp3",
"ppmmu3";
+ power-domains = <&power RK3188_PD_GPU>;
};
&i2c0 {
@@ -652,6 +656,53 @@
pinctrl-0 = <&i2c4_xfer>;
};
+&pmu {
+ power: power-controller {
+ compatible = "rockchip,rk3188-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_vio@RK3188_PD_VIO {
+ reg = <RK3188_PD_VIO>;
+ clocks = <&cru ACLK_LCDC0>,
+ <&cru ACLK_LCDC1>,
+ <&cru DCLK_LCDC0>,
+ <&cru DCLK_LCDC1>,
+ <&cru HCLK_LCDC0>,
+ <&cru HCLK_LCDC1>,
+ <&cru SCLK_CIF0>,
+ <&cru ACLK_CIF0>,
+ <&cru HCLK_CIF0>,
+ <&cru ACLK_IPP>,
+ <&cru HCLK_IPP>,
+ <&cru ACLK_RGA>,
+ <&cru HCLK_RGA>;
+ pm_qos = <&qos_lcdc0>,
+ <&qos_lcdc1>,
+ <&qos_cif0>,
+ <&qos_cif1>,
+ <&qos_ipp>,
+ <&qos_rga>;
+ };
+
+ pd_video@RK3188_PD_VIDEO {
+ reg = <RK3188_PD_VIDEO>;
+ clocks = <&cru ACLK_VDPU>,
+ <&cru ACLK_VEPU>,
+ <&cru HCLK_VDPU>,
+ <&cru HCLK_VEPU>;
+ pm_qos = <&qos_vpu>;
+ };
+
+ pd_gpu@RK3188_PD_GPU {
+ reg = <RK3188_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ pm_qos = <&qos_gpu>;
+ };
+ };
+};
+
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_out>;
Add the power-domain nodes to both rk3066 and rk3188 including their clocks and qos connections. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- arch/arm/boot/dts/rk3066a.dtsi | 52 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/rk3188.dtsi | 51 +++++++++++++++++++++++++++++++++ 2 files changed, 103 insertions(+)