diff mbox series

ARM: SAMSUNG: limit SAMSUNG_PM_DEBUG config option to non-Exynos platforms

Message ID 20180928133713eucas1p16a15a68b61de9aa3310737f7fd77d20d~Yk9kqY_Ga2124121241eucas1p1b@eucas1p1.samsung.com (mailing list archive)
State New, archived
Headers show
Series ARM: SAMSUNG: limit SAMSUNG_PM_DEBUG config option to non-Exynos platforms | expand

Commit Message

Bartlomiej Zolnierkiewicz Sept. 28, 2018, 1:37 p.m. UTC
"Samsung PM Suspend debug" feature (controlled by SAMSUNG_PM_DEBUG
config option) is not working properly (debug messages are not
displayed after resume) on Exynos platforms because GPIOs restore
code is not implemented.

Add PLAT_S3C24XX, ARCH_S3C64XX and ARCH_S5PV210 dependencies to
SAMSUNG_PM_DEBUG config option to hide it on Exynos platforms.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 arch/arm/plat-samsung/Kconfig |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Krzysztof Kozlowski Sept. 28, 2018, 1:54 p.m. UTC | #1
On Fri, 28 Sep 2018 at 15:37, Bartlomiej Zolnierkiewicz
<b.zolnierkie@samsung.com> wrote:
>
> "Samsung PM Suspend debug" feature (controlled by SAMSUNG_PM_DEBUG
> config option) is not working properly (debug messages are not
> displayed after resume) on Exynos platforms because GPIOs restore
> code is not implemented.

AFAIR, it worked properly for the suspend part showing more logs.
Unless it changed, the feature looks still useful.

Best regards,
Krzysztof

>
> Add PLAT_S3C24XX, ARCH_S3C64XX and ARCH_S5PV210 dependencies to
> SAMSUNG_PM_DEBUG config option to hide it on Exynos platforms.
>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> ---
>  arch/arm/plat-samsung/Kconfig |    3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> Index: b/arch/arm/plat-samsung/Kconfig
> ===================================================================
> --- a/arch/arm/plat-samsung/Kconfig     2018-09-28 15:20:06.041911426 +0200
> +++ b/arch/arm/plat-samsung/Kconfig     2018-09-28 15:20:06.037911426 +0200
> @@ -238,7 +238,8 @@ comment "Power management"
>
>  config SAMSUNG_PM_DEBUG
>         bool "Samsung PM Suspend debug"
> -       depends on PM && DEBUG_KERNEL
> +       depends on DEBUG_KERNEL
> +       depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)
>         depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
>         help
>           Say Y here if you want verbose debugging from the PM Suspend and
>
Bartlomiej Zolnierkiewicz Sept. 28, 2018, 4:34 p.m. UTC | #2
On 09/28/2018 03:54 PM, Krzysztof Kozlowski wrote:
> On Fri, 28 Sep 2018 at 15:37, Bartlomiej Zolnierkiewicz
> <b.zolnierkie@samsung.com> wrote:
>>
>> "Samsung PM Suspend debug" feature (controlled by SAMSUNG_PM_DEBUG
>> config option) is not working properly (debug messages are not
>> displayed after resume) on Exynos platforms because GPIOs restore
>> code is not implemented.
> 
> AFAIR, it worked properly for the suspend part showing more logs.
> Unless it changed, the feature looks still useful.

Yes, it shows few additional messages from mach/plat specific suspend
code but it breaks the assumption that features (even debug ones)
work correctly and make you invest time in debugging known broken
code.

In case it is needed/useful (which should be rather rare situation)
one can always easily revert the commit locally.

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
Krzysztof Kozlowski Sept. 30, 2018, 12:38 p.m. UTC | #3
On Fri, Sep 28, 2018 at 06:34:55PM +0200, Bartlomiej Zolnierkiewicz wrote:
> 
> 
> On 09/28/2018 03:54 PM, Krzysztof Kozlowski wrote:
> > On Fri, 28 Sep 2018 at 15:37, Bartlomiej Zolnierkiewicz
> > <b.zolnierkie@samsung.com> wrote:
> >>
> >> "Samsung PM Suspend debug" feature (controlled by SAMSUNG_PM_DEBUG
> >> config option) is not working properly (debug messages are not
> >> displayed after resume) on Exynos platforms because GPIOs restore
> >> code is not implemented.
> > 
> > AFAIR, it worked properly for the suspend part showing more logs.
> > Unless it changed, the feature looks still useful.
> 
> Yes, it shows few additional messages from mach/plat specific suspend
> code but it breaks the assumption that features (even debug ones)
> work correctly and make you invest time in debugging known broken
> code.

OK, let's remove it. However in such case this change leaves useless
S3C_PMDBG and other s3c_pm_* in Exynos code. They should go away along
with SAMSUNG_PM_DEBUG.

Best regards,
Krzysztof

> 
> In case it is needed/useful (which should be rather rare situation)
> one can always easily revert the commit locally.
> 
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
diff mbox series

Patch

Index: b/arch/arm/plat-samsung/Kconfig
===================================================================
--- a/arch/arm/plat-samsung/Kconfig	2018-09-28 15:20:06.041911426 +0200
+++ b/arch/arm/plat-samsung/Kconfig	2018-09-28 15:20:06.037911426 +0200
@@ -238,7 +238,8 @@  comment "Power management"
 
 config SAMSUNG_PM_DEBUG
 	bool "Samsung PM Suspend debug"
-	depends on PM && DEBUG_KERNEL
+	depends on DEBUG_KERNEL
+	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)
 	depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and