| Message ID | 20181003165603.2579-4-vigneshr@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | spi-nor: Add Octal SPI support | expand |
On Wed, 3 Oct 2018 22:26:03 +0530 Vignesh R <vigneshr@ti.com> wrote: > Cadence OSPI controller IP supports Octal IO (x8 IO lines), > It also has an integrated PHY. IP register layout is very > similar to existing QSPI IP except for additional bits to support Octal > and Octal DDR mode. Therefore, extend current driver to support Octal > mode. > > Signed-off-by: Vignesh R <vigneshr@ti.com> > --- > drivers/mtd/spi-nor/cadence-quadspi.c | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c > index e24db817154e..48b00e75a879 100644 > --- a/drivers/mtd/spi-nor/cadence-quadspi.c > +++ b/drivers/mtd/spi-nor/cadence-quadspi.c > @@ -101,6 +101,7 @@ struct cqspi_st { > #define CQSPI_INST_TYPE_SINGLE 0 > #define CQSPI_INST_TYPE_DUAL 1 > #define CQSPI_INST_TYPE_QUAD 2 > +#define CQSPI_INST_TYPE_OCTAL 3 > > #define CQSPI_DUMMY_CLKS_PER_BYTE 8 > #define CQSPI_DUMMY_BYTES_MAX 4 > @@ -898,6 +899,9 @@ static int cqspi_set_protocol(struct spi_nor *nor, const int read) > case SNOR_PROTO_1_1_4: > f_pdata->data_width = CQSPI_INST_TYPE_QUAD; > break; > + case SNOR_PROTO_1_1_8: > + f_pdata->data_width = CQSPI_INST_TYPE_OCTAL; > + break; > default: > return -EINVAL; > } > @@ -1205,6 +1209,7 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np) > SNOR_HWCAPS_READ_FAST | > SNOR_HWCAPS_READ_1_1_2 | > SNOR_HWCAPS_READ_1_1_4 | > + SNOR_HWCAPS_READ_1_1_8 | Is this really supported on qspi versions of this IP? I guess not given the description in the commit message and the name of the new compatible (ospi instead of qspi). > SNOR_HWCAPS_PP, > }; > struct platform_device *pdev = cqspi->pdev; > @@ -1456,6 +1461,10 @@ static const struct of_device_id cqspi_dt_ids[] = { > .compatible = "ti,k2g-qspi", > .data = (void *)CQSPI_NEEDS_WR_DELAY, > }, > + { > + .compatible = "ti,am654-ospi", > + .data = (void *)CQSPI_NEEDS_WR_DELAY, > + }, > { /* end of table */ } > }; >
On 10/12/18 2:15 PM, Boris Brezillon wrote: > On Wed, 3 Oct 2018 22:26:03 +0530 > Vignesh R <vigneshr@ti.com> wrote: > >> Cadence OSPI controller IP supports Octal IO (x8 IO lines), >> It also has an integrated PHY. IP register layout is very >> similar to existing QSPI IP except for additional bits to support Octal >> and Octal DDR mode. Therefore, extend current driver to support Octal >> mode. >> >> Signed-off-by: Vignesh R <vigneshr@ti.com> >> --- >> drivers/mtd/spi-nor/cadence-quadspi.c | 9 +++++++++ >> 1 file changed, 9 insertions(+) >> >> diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c >> index e24db817154e..48b00e75a879 100644 >> --- a/drivers/mtd/spi-nor/cadence-quadspi.c >> +++ b/drivers/mtd/spi-nor/cadence-quadspi.c >> @@ -101,6 +101,7 @@ struct cqspi_st { >> #define CQSPI_INST_TYPE_SINGLE 0 >> #define CQSPI_INST_TYPE_DUAL 1 >> #define CQSPI_INST_TYPE_QUAD 2 >> +#define CQSPI_INST_TYPE_OCTAL 3 >> >> #define CQSPI_DUMMY_CLKS_PER_BYTE 8 >> #define CQSPI_DUMMY_BYTES_MAX 4 >> @@ -898,6 +899,9 @@ static int cqspi_set_protocol(struct spi_nor *nor, const int read) >> case SNOR_PROTO_1_1_4: >> f_pdata->data_width = CQSPI_INST_TYPE_QUAD; >> break; >> + case SNOR_PROTO_1_1_8: >> + f_pdata->data_width = CQSPI_INST_TYPE_OCTAL; >> + break; >> default: >> return -EINVAL; >> } >> @@ -1205,6 +1209,7 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np) >> SNOR_HWCAPS_READ_FAST | >> SNOR_HWCAPS_READ_1_1_2 | >> SNOR_HWCAPS_READ_1_1_4 | >> + SNOR_HWCAPS_READ_1_1_8 | > > Is this really supported on qspi versions of this IP? I guess not given > the description in the commit message and the name of the new > compatible (ospi instead of qspi). No, qspi version does not support Octal mode. I guess you are pointing out its logically wrong for driver with "*-qspi" compatible to declare SNOR_HWCAPS_READ_1_1_8 capability. Will update patch to declare SNOR_HWCAPS_READ_1_1_8 based on compatible. > >> SNOR_HWCAPS_PP, >> }; >> struct platform_device *pdev = cqspi->pdev; >> @@ -1456,6 +1461,10 @@ static const struct of_device_id cqspi_dt_ids[] = { >> .compatible = "ti,k2g-qspi", >> .data = (void *)CQSPI_NEEDS_WR_DELAY, >> }, >> + { >> + .compatible = "ti,am654-ospi", >> + .data = (void *)CQSPI_NEEDS_WR_DELAY, >> + }, >> { /* end of table */ } >> }; >> >
On Mon, 10 Dec 2018 16:49:29 +0530 Vignesh R <vigneshr@ti.com> wrote: > On 10/12/18 2:15 PM, Boris Brezillon wrote: > > On Wed, 3 Oct 2018 22:26:03 +0530 > > Vignesh R <vigneshr@ti.com> wrote: > > > >> Cadence OSPI controller IP supports Octal IO (x8 IO lines), > >> It also has an integrated PHY. IP register layout is very > >> similar to existing QSPI IP except for additional bits to support Octal > >> and Octal DDR mode. Therefore, extend current driver to support Octal > >> mode. > >> > >> Signed-off-by: Vignesh R <vigneshr@ti.com> > >> --- > >> drivers/mtd/spi-nor/cadence-quadspi.c | 9 +++++++++ > >> 1 file changed, 9 insertions(+) > >> > >> diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c > >> index e24db817154e..48b00e75a879 100644 > >> --- a/drivers/mtd/spi-nor/cadence-quadspi.c > >> +++ b/drivers/mtd/spi-nor/cadence-quadspi.c > >> @@ -101,6 +101,7 @@ struct cqspi_st { > >> #define CQSPI_INST_TYPE_SINGLE 0 > >> #define CQSPI_INST_TYPE_DUAL 1 > >> #define CQSPI_INST_TYPE_QUAD 2 > >> +#define CQSPI_INST_TYPE_OCTAL 3 > >> > >> #define CQSPI_DUMMY_CLKS_PER_BYTE 8 > >> #define CQSPI_DUMMY_BYTES_MAX 4 > >> @@ -898,6 +899,9 @@ static int cqspi_set_protocol(struct spi_nor *nor, const int read) > >> case SNOR_PROTO_1_1_4: > >> f_pdata->data_width = CQSPI_INST_TYPE_QUAD; > >> break; > >> + case SNOR_PROTO_1_1_8: > >> + f_pdata->data_width = CQSPI_INST_TYPE_OCTAL; > >> + break; > >> default: > >> return -EINVAL; > >> } > >> @@ -1205,6 +1209,7 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np) > >> SNOR_HWCAPS_READ_FAST | > >> SNOR_HWCAPS_READ_1_1_2 | > >> SNOR_HWCAPS_READ_1_1_4 | > >> + SNOR_HWCAPS_READ_1_1_8 | > > > > Is this really supported on qspi versions of this IP? I guess not given > > the description in the commit message and the name of the new > > compatible (ospi instead of qspi). > > No, qspi version does not support Octal mode. I guess you are pointing > out its logically wrong for driver with "*-qspi" compatible to declare > SNOR_HWCAPS_READ_1_1_8 capability. Exactly. > Will update patch to declare SNOR_HWCAPS_READ_1_1_8 based on compatible. Thanks.
diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index e24db817154e..48b00e75a879 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -101,6 +101,7 @@ struct cqspi_st { #define CQSPI_INST_TYPE_SINGLE 0 #define CQSPI_INST_TYPE_DUAL 1 #define CQSPI_INST_TYPE_QUAD 2 +#define CQSPI_INST_TYPE_OCTAL 3 #define CQSPI_DUMMY_CLKS_PER_BYTE 8 #define CQSPI_DUMMY_BYTES_MAX 4 @@ -898,6 +899,9 @@ static int cqspi_set_protocol(struct spi_nor *nor, const int read) case SNOR_PROTO_1_1_4: f_pdata->data_width = CQSPI_INST_TYPE_QUAD; break; + case SNOR_PROTO_1_1_8: + f_pdata->data_width = CQSPI_INST_TYPE_OCTAL; + break; default: return -EINVAL; } @@ -1205,6 +1209,7 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np) SNOR_HWCAPS_READ_FAST | SNOR_HWCAPS_READ_1_1_2 | SNOR_HWCAPS_READ_1_1_4 | + SNOR_HWCAPS_READ_1_1_8 | SNOR_HWCAPS_PP, }; struct platform_device *pdev = cqspi->pdev; @@ -1456,6 +1461,10 @@ static const struct of_device_id cqspi_dt_ids[] = { .compatible = "ti,k2g-qspi", .data = (void *)CQSPI_NEEDS_WR_DELAY, }, + { + .compatible = "ti,am654-ospi", + .data = (void *)CQSPI_NEEDS_WR_DELAY, + }, { /* end of table */ } };
Cadence OSPI controller IP supports Octal IO (x8 IO lines), It also has an integrated PHY. IP register layout is very similar to existing QSPI IP except for additional bits to support Octal and Octal DDR mode. Therefore, extend current driver to support Octal mode. Signed-off-by: Vignesh R <vigneshr@ti.com> --- drivers/mtd/spi-nor/cadence-quadspi.c | 9 +++++++++ 1 file changed, 9 insertions(+)