diff mbox series

[v4,05/10] arm64: allwinner: dts: h6: add USB Vbus regulator

Message ID 20181004122855.22981-6-icenowy@aosc.io (mailing list archive)
State New, archived
Headers show
Series Allwinner H6 USB support | expand

Commit Message

Icenowy Zheng Oct. 4, 2018, 12:28 p.m. UTC 
The 5V output of the USB ports on Pine H64 is controlled via a GPIO.

Add the USB Vbus regulator device tree node.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
---
No changes in v4.

Changes in v3:
- Added Chen-Yu's Review tag.

 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 48daec7f78ba..b181088d7500 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -39,6 +39,16 @@ 
 			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
 		};
 	};
+
+	reg_usb_vbus: vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <100000>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &mmc0 {