| Message ID | 20181005085505.29024-3-pankaj.bansal@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | add i2c controlled qixis driver | expand |
On Thu, Oct 4, 2018 at 11:03 PM Pankaj Bansal <pankaj.bansal@nxp.com> wrote: > > FPGA on LX2160AQDS/LX2160ARDB connected on I2C bus, so add qixis > driver which is basically an i2c client driver to control FPGA. Is this driver just used to print out the QIXIS version and create platform devices for all the subnodes? If that's the case, a "simple-bus" compatibility in the fpga node would be enough. > > Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> > Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> > --- > drivers/soc/fsl/Kconfig | 9 ++++ > drivers/soc/fsl/Makefile | 1 + > drivers/soc/fsl/qixis_ctrl.c | 75 ++++++++++++++++++++++++++++++++ > include/linux/fsl/qixis_ctrl.h | 20 +++++++++ > 4 files changed, 105 insertions(+) > > diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig > index 8f80e8bbf29e..c355c2cbbd45 100644 > --- a/drivers/soc/fsl/Kconfig > +++ b/drivers/soc/fsl/Kconfig > @@ -28,4 +28,13 @@ config FSL_MC_DPIO > other DPAA2 objects. This driver does not expose the DPIO > objects individually, but groups them under a service layer > API. > + > +config FSL_QIXIS > + tristate "QIXIS system controller driver" > + select REGMAP_I2C > + default n > + help > + Say y here to enable QIXIS system controller api. The qixis driver > + provides FPGA functions to control system. > + > endmenu > diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile > index 803ef1bfb5ff..47e0cfc66ca4 100644 > --- a/drivers/soc/fsl/Makefile > +++ b/drivers/soc/fsl/Makefile > @@ -5,5 +5,6 @@ > obj-$(CONFIG_FSL_DPAA) += qbman/ > obj-$(CONFIG_QUICC_ENGINE) += qe/ > obj-$(CONFIG_CPM) += qe/ > +obj-$(CONFIG_FSL_QIXIS) += qixis_ctrl.o > obj-$(CONFIG_FSL_GUTS) += guts.o > obj-$(CONFIG_FSL_MC_DPIO) += dpio/ > diff --git a/drivers/soc/fsl/qixis_ctrl.c b/drivers/soc/fsl/qixis_ctrl.c > new file mode 100644 > index 000000000000..b94649fb9726 > --- /dev/null > +++ b/drivers/soc/fsl/qixis_ctrl.c > @@ -0,0 +1,75 @@ > +// SPDX-License-Identifier: GPL-2.0+ > + > +/* Freescale QIXIS system controller driver. > + * > + * Copyright 2015 Freescale Semiconductor, Inc. > + * Copyright 2018 NXP > + */ > + > +#include <linux/device.h> > +#include <linux/err.h> > +#include <linux/fsl/qixis_ctrl.h> > +#include <linux/io.h> > +#include <linux/i2c.h> > +#include <linux/module.h> > +#include <linux/of_address.h> > +#include <linux/of_platform.h> > +#include <linux/platform_device.h> > +#include <linux/regmap.h> > + > +static struct regmap *qixis_regmap; > + > +static struct regmap_config qixis_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > +}; > + > +static int fsl_qixis_i2c_probe(struct i2c_client *client) > +{ > + struct platform_device *pdev; > + struct device_node *child; > + u32 qver; > + > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) > + return -EOPNOTSUPP; > + > + qixis_regmap = regmap_init_i2c(client, &qixis_regmap_config); > + > + /* create platform device for each of the child node of FPGA node */ > + for_each_child_of_node(client->dev.of_node, child) { > + pdev = of_platform_device_create(child, NULL, &client->dev); > + }; > + > + regmap_read(qixis_regmap, offsetof(struct fsl_qixis_regs, qixis_ver), > + &qver); > + > + pr_info("Freescale QIXIS Version: 0x%08x\n", qver); > + > + return 0; > +} > + > +static int fsl_qixis_i2c_remove(struct i2c_client *client) > +{ Don't need to cleanup the regmap created? > + return 0; > +} > + > +static const struct of_device_id fsl_qixis_of_match[] = { > + { .compatible = "fsl,fpga-qixis-i2c" }, > + {} > +}; > +MODULE_DEVICE_TABLE(of, fsl_qixis_of_match); > + > +static struct i2c_driver fsl_qixis_i2c_driver = { > + .driver = { > + .name = "qixis_ctrl", > + .owner = THIS_MODULE, > + .of_match_table = of_match_ptr(fsl_qixis_of_match), > + }, > + .probe_new = fsl_qixis_i2c_probe, > + .remove = fsl_qixis_i2c_remove, > +}; > +module_i2c_driver(fsl_qixis_i2c_driver); > + > +MODULE_AUTHOR("Wang Dongsheng <dongsheng.wang@freescale.com>"); > +MODULE_DESCRIPTION("Freescale QIXIS system controller driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/include/linux/fsl/qixis_ctrl.h b/include/linux/fsl/qixis_ctrl.h > new file mode 100644 > index 000000000000..00e80ef21adc > --- /dev/null > +++ b/include/linux/fsl/qixis_ctrl.h > @@ -0,0 +1,20 @@ > +/* SPDX-License-Identifier: GPL-2.0+ > + * > + * Definitions for Freescale QIXIS system controller. > + * > + * Copyright 2015 Freescale Semiconductor, Inc. > + * Copyright 2018 NXP > + */ > + > +#ifndef _FSL_QIXIS_CTRL_H_ > +#define _FSL_QIXIS_CTRL_H_ > + > +/* QIXIS MAP */ > +struct fsl_qixis_regs { > + u8 id; /* Identification Registers */ > + u8 version; /* Version Register */ > + u8 qixis_ver; /* QIXIS Version Register */ > + u8 reserved1[0x1f]; > +}; > + > +#endif > -- > 2.17.1 >
diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig index 8f80e8bbf29e..c355c2cbbd45 100644 --- a/drivers/soc/fsl/Kconfig +++ b/drivers/soc/fsl/Kconfig @@ -28,4 +28,13 @@ config FSL_MC_DPIO other DPAA2 objects. This driver does not expose the DPIO objects individually, but groups them under a service layer API. + +config FSL_QIXIS + tristate "QIXIS system controller driver" + select REGMAP_I2C + default n + help + Say y here to enable QIXIS system controller api. The qixis driver + provides FPGA functions to control system. + endmenu diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile index 803ef1bfb5ff..47e0cfc66ca4 100644 --- a/drivers/soc/fsl/Makefile +++ b/drivers/soc/fsl/Makefile @@ -5,5 +5,6 @@ obj-$(CONFIG_FSL_DPAA) += qbman/ obj-$(CONFIG_QUICC_ENGINE) += qe/ obj-$(CONFIG_CPM) += qe/ +obj-$(CONFIG_FSL_QIXIS) += qixis_ctrl.o obj-$(CONFIG_FSL_GUTS) += guts.o obj-$(CONFIG_FSL_MC_DPIO) += dpio/ diff --git a/drivers/soc/fsl/qixis_ctrl.c b/drivers/soc/fsl/qixis_ctrl.c new file mode 100644 index 000000000000..b94649fb9726 --- /dev/null +++ b/drivers/soc/fsl/qixis_ctrl.c @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/* Freescale QIXIS system controller driver. + * + * Copyright 2015 Freescale Semiconductor, Inc. + * Copyright 2018 NXP + */ + +#include <linux/device.h> +#include <linux/err.h> +#include <linux/fsl/qixis_ctrl.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +static struct regmap *qixis_regmap; + +static struct regmap_config qixis_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int fsl_qixis_i2c_probe(struct i2c_client *client) +{ + struct platform_device *pdev; + struct device_node *child; + u32 qver; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EOPNOTSUPP; + + qixis_regmap = regmap_init_i2c(client, &qixis_regmap_config); + + /* create platform device for each of the child node of FPGA node */ + for_each_child_of_node(client->dev.of_node, child) { + pdev = of_platform_device_create(child, NULL, &client->dev); + }; + + regmap_read(qixis_regmap, offsetof(struct fsl_qixis_regs, qixis_ver), + &qver); + + pr_info("Freescale QIXIS Version: 0x%08x\n", qver); + + return 0; +} + +static int fsl_qixis_i2c_remove(struct i2c_client *client) +{ + return 0; +} + +static const struct of_device_id fsl_qixis_of_match[] = { + { .compatible = "fsl,fpga-qixis-i2c" }, + {} +}; +MODULE_DEVICE_TABLE(of, fsl_qixis_of_match); + +static struct i2c_driver fsl_qixis_i2c_driver = { + .driver = { + .name = "qixis_ctrl", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(fsl_qixis_of_match), + }, + .probe_new = fsl_qixis_i2c_probe, + .remove = fsl_qixis_i2c_remove, +}; +module_i2c_driver(fsl_qixis_i2c_driver); + +MODULE_AUTHOR("Wang Dongsheng <dongsheng.wang@freescale.com>"); +MODULE_DESCRIPTION("Freescale QIXIS system controller driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/fsl/qixis_ctrl.h b/include/linux/fsl/qixis_ctrl.h new file mode 100644 index 000000000000..00e80ef21adc --- /dev/null +++ b/include/linux/fsl/qixis_ctrl.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0+ + * + * Definitions for Freescale QIXIS system controller. + * + * Copyright 2015 Freescale Semiconductor, Inc. + * Copyright 2018 NXP + */ + +#ifndef _FSL_QIXIS_CTRL_H_ +#define _FSL_QIXIS_CTRL_H_ + +/* QIXIS MAP */ +struct fsl_qixis_regs { + u8 id; /* Identification Registers */ + u8 version; /* Version Register */ + u8 qixis_ver; /* QIXIS Version Register */ + u8 reserved1[0x1f]; +}; + +#endif