| Message ID | 20181023185330.10472-4-oskari@lemmela.net (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | AXP8x3 AC and battery power supply support | expand |
On Tue, 23 Oct 2018 21:53:22 +0300, Oskari Lemmela wrote: > The AXP803 GPIO is compatible with AXP813 GPIO, but add > specific compatible for it. > > Signed-off-by: Oskari Lemmela <oskari@lemmela.net> > --- > Documentation/devicetree/bindings/gpio/gpio-axp209.txt | 2 ++ > 1 file changed, 2 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org>
On Wed, Oct 24, 2018 at 2:54 AM Oskari Lemmela <oskari@lemmela.net> wrote: > > The AXP803 GPIO is compatible with AXP813 GPIO, but add > specific compatible for it. > > Signed-off-by: Oskari Lemmela <oskari@lemmela.net> > --- > Documentation/devicetree/bindings/gpio/gpio-axp209.txt | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt > index fc42b2caa06d..5337a21d7bcf 100644 > --- a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt > +++ b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt > @@ -11,6 +11,7 @@ This driver employs the per-pin muxing pattern. > Required properties: > - compatible: Should be one of: > - "x-powers,axp209-gpio" > + - "x-powers,axp803-gpio" > - "x-powers,axp813-gpio" > - #gpio-cells: Should be two. The first cell is the pin number and the > second is the GPIO flags. > @@ -67,6 +68,7 @@ GPIO0 | gpio_in, gpio_out, ldo, adc > GPIO1 | gpio_in, gpio_out, ldo, adc > GPIO2 | gpio_in, gpio_out > > +axp803 > axp813 > ------ > GPIO | Functions > -- As mentioned in my reply to the cover letter, this patch isn't needed. We ask people to add model-specific compatibles in the device tree in case the hardware turns out not to be so compatible with the old hardware we thought it was compatible with. With the model-specific compatible in place, we have a way out. Without it, we'd have to ask everyone to update their device trees, which annoys some people who'd like to have some sort of backward compatibility. If the model-specific + fallback compatibles combination was to be listed, the line would include both compatibles. But we're not doing that for Allwinner stuff. As mentioned it is there just in case. The best outcome is we don't care and don't need to use them. ChenYu
diff --git a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt index fc42b2caa06d..5337a21d7bcf 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt @@ -11,6 +11,7 @@ This driver employs the per-pin muxing pattern. Required properties: - compatible: Should be one of: - "x-powers,axp209-gpio" + - "x-powers,axp803-gpio" - "x-powers,axp813-gpio" - #gpio-cells: Should be two. The first cell is the pin number and the second is the GPIO flags. @@ -67,6 +68,7 @@ GPIO0 | gpio_in, gpio_out, ldo, adc GPIO1 | gpio_in, gpio_out, ldo, adc GPIO2 | gpio_in, gpio_out +axp803 axp813 ------ GPIO | Functions
The AXP803 GPIO is compatible with AXP813 GPIO, but add specific compatible for it. Signed-off-by: Oskari Lemmela <oskari@lemmela.net> --- Documentation/devicetree/bindings/gpio/gpio-axp209.txt | 2 ++ 1 file changed, 2 insertions(+)