@@ -428,6 +428,50 @@ static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
return ret;
}
+/**
+ * zynqmp_pm_fpga_load - Perform the fpga load
+ * @address: Address to write to
+ * @size: pl bitstream size
+ * @flags:
+ * BIT(0) - Bit-stream type.
+ * 0 - Full Bitstream.
+ * 1 - Partial Bitstream.
+ *
+ * This function provides access to pmufw. To transfer
+ * the required bitstream into PL.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_fpga_load(const u64 address, const u32 size,
+ const u32 flags)
+{
+ return zynqmp_pm_invoke_fn(PM_FPGA_LOAD, lower_32_bits(address),
+ upper_32_bits(address), size, flags, NULL);
+}
+
+/**
+ * zynqmp_pm_fpga_get_status - Read value from PCAP status register
+ * @value: Value to read
+ *
+ * This function provides access to the xilfpga library to get
+ * the PCAP status
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_fpga_get_status(u32 *value)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!value)
+ return -EINVAL;
+
+ ret = zynqmp_pm_invoke_fn(PM_FPGA_GET_STATUS, 0, 0, 0, 0, ret_payload);
+ *value = ret_payload[1];
+
+ return ret;
+}
+
static const struct zynqmp_eemi_ops eemi_ops = {
.get_api_version = zynqmp_pm_get_api_version,
.query_data = zynqmp_pm_query_data,
@@ -440,6 +484,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
.clock_getrate = zynqmp_pm_clock_getrate,
.clock_setparent = zynqmp_pm_clock_setparent,
.clock_getparent = zynqmp_pm_clock_getparent,
+ .fpga_load = zynqmp_pm_fpga_load,
+ .fpga_get_status = zynqmp_pm_fpga_get_status,
};
/**
@@ -32,8 +32,18 @@
/* Number of 32bits values in payload */
#define PAYLOAD_ARG_CNT 4U
+/*
+ * Firmware FPGA Manager flags
+ * XILINX_ZYNQMP_PM_FPGA_PARTIAL: FPGA partial reconfiguration
+ */
+#define XILINX_ZYNQMP_PM_FPGA_PARTIAL BIT(0)
+
+
+
enum pm_api_id {
PM_GET_API_VERSION = 1,
+ PM_FPGA_LOAD = 22,
+ PM_FPGA_GET_STATUS,
PM_QUERY_DATA = 35,
PM_CLOCK_ENABLE,
PM_CLOCK_DISABLE,
@@ -89,6 +99,8 @@ struct zynqmp_pm_query_data {
struct zynqmp_eemi_ops {
int (*get_api_version)(u32 *version);
+ int (*fpga_load)(const u64 address, const u32 size, const u32 flags);
+ int (*fpga_get_status)(u32 *value);
int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
int (*clock_enable)(u32 clock_id);
int (*clock_disable)(u32 clock_id);
This Patch Adds fpga API's to support the Bitstream loading by using firmware interface. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> --- This patch depends on the below series of patches https://lkml.org/lkml/2018/9/12/983 Which is got integrated into the below upstream repo. https://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git/tree/drivers/firmware/xilinx?h=for-next Changes for v2: -Added Firmware FPGA Manager flags As suggested by Moritz. Changes for v1: -None. Changes for RFC-V2: -New Patch. drivers/firmware/xilinx/zynqmp.c | 46 ++++++++++++++++++++++++++++ include/linux/firmware/xlnx-zynqmp.h | 12 ++++++++ 2 files changed, 58 insertions(+)