@@ -210,10 +210,10 @@ typedef compat_elf_greg_t compat_elf_gregset_t[COMPAT_ELF_NGREG];
set_thread_flag(TIF_32BIT); \
})
#define COMPAT_ARCH_DLINFO
-extern int aarch32_setup_vectors_page(struct linux_binprm *bprm,
- int uses_interp);
+extern int aarch32_setup_additional_pages(struct linux_binprm *bprm,
+ int uses_interp);
#define compat_arch_setup_additional_pages \
- aarch32_setup_vectors_page
+ aarch32_setup_additional_pages
#endif /* CONFIG_COMPAT */
@@ -59,9 +59,9 @@
#define STACK_TOP_MAX TASK_SIZE_64
#ifdef CONFIG_COMPAT
-#define AARCH32_VECTORS_BASE 0xffff0000
+#define AARCH32_KUSER_BASE 0xffff0000
#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \
- AARCH32_VECTORS_BASE : STACK_TOP_MAX)
+ AARCH32_KUSER_BASE : STACK_TOP_MAX)
#else
#define STACK_TOP STACK_TOP_MAX
#endif /* CONFIG_COMPAT */
@@ -20,8 +20,6 @@
#ifdef CONFIG_COMPAT
#include <linux/compat.h>
-#define AARCH32_KERN_SIGRET_CODE_OFFSET 0x500
-
int compat_setup_frame(int usig, struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs);
int compat_setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
@@ -379,6 +379,7 @@ static void compat_setup_return(struct pt_regs *regs, struct k_sigaction *ka,
compat_ulong_t retcode;
compat_ulong_t spsr = regs->pstate & ~(PSR_f | PSR_AA32_E_BIT);
int thumb;
+ void *sigreturn_base;
/* Check if the handler is written for ARM or Thumb */
thumb = handler & 1;
@@ -399,12 +400,12 @@ static void compat_setup_return(struct pt_regs *regs, struct k_sigaction *ka,
} else {
/* Set up sigreturn pointer */
unsigned int idx = thumb << 1;
+ sigreturn_base = current->mm->context.vdso;
if (ka->sa.sa_flags & SA_SIGINFO)
idx += 3;
- retcode = AARCH32_VECTORS_BASE +
- AARCH32_KERN_SIGRET_CODE_OFFSET +
+ retcode = ptr_to_compat(sigreturn_base) +
(idx << 2) + thumb;
}
@@ -1,5 +1,7 @@
/*
- * VDSO implementation for AArch64 and vector page setup for AArch32.
+ * VDSO implementation for AArch64 and for AArch32:
+ * AArch64: vDSO implementation contains pages setup and data page update.
+ * AArch32: vDSO implementation contains sigreturn and kuser pages setup.
*
* Copyright (C) 2012 ARM Limited
*
@@ -53,61 +55,117 @@ struct vdso_data *vdso_data = &vdso_data_store.data;
/*
* Create and map the vectors page for AArch32 tasks.
*/
-static struct page *vectors_page[1] __ro_after_init;
+/*
+ * aarch32_vdso_pages:
+ * 0 - kuser helpers
+ * 1 - sigreturn code
+ */
+static struct page *aarch32_vdso_pages[2] __ro_after_init;
+static const struct vm_special_mapping aarch32_vdso_spec[2] = {
+ {
+ /* Must be named [vectors] for compatibility with arm. */
+ .name = "[vectors]",
+ .pages = &aarch32_vdso_pages[0],
+ },
+ {
+ /* Must be named [sigpage] for compatibility with arm. */
+ .name = "[sigpage]",
+ .pages = &aarch32_vdso_pages[1],
+ },
+};
-static int __init alloc_vectors_page(void)
+static int __init aarch32_alloc_vdso_pages(void)
{
extern char __kuser_helper_start[], __kuser_helper_end[];
extern char __aarch32_sigret_code_start[], __aarch32_sigret_code_end[];
int kuser_sz = __kuser_helper_end - __kuser_helper_start;
int sigret_sz = __aarch32_sigret_code_end - __aarch32_sigret_code_start;
- unsigned long vpage;
+ unsigned long vdso_pages[2];
- vpage = get_zeroed_page(GFP_ATOMIC);
+ vdso_pages[0] = get_zeroed_page(GFP_ATOMIC);
+ if (!vdso_pages[0])
+ return -ENOMEM;
- if (!vpage)
+ vdso_pages[1] = get_zeroed_page(GFP_ATOMIC);
+ if (!vdso_pages[1])
return -ENOMEM;
/* kuser helpers */
- memcpy((void *)vpage + 0x1000 - kuser_sz, __kuser_helper_start,
- kuser_sz);
+ memcpy((void *)(vdso_pages[0] + 0x1000 - kuser_sz),
+ __kuser_helper_start,
+ kuser_sz);
/* sigreturn code */
- memcpy((void *)vpage + AARCH32_KERN_SIGRET_CODE_OFFSET,
- __aarch32_sigret_code_start, sigret_sz);
+ memcpy((void *)vdso_pages[1],
+ __aarch32_sigret_code_start,
+ sigret_sz);
- flush_icache_range(vpage, vpage + PAGE_SIZE);
- vectors_page[0] = virt_to_page(vpage);
+ flush_icache_range(vdso_pages[0], vdso_pages[0] + PAGE_SIZE);
+ flush_icache_range(vdso_pages[1], vdso_pages[1] + PAGE_SIZE);
+
+ aarch32_vdso_pages[0] = virt_to_page(vdso_pages[0]);
+ aarch32_vdso_pages[1] = virt_to_page(vdso_pages[1]);
return 0;
}
-arch_initcall(alloc_vectors_page);
+arch_initcall(aarch32_alloc_vdso_pages);
-int aarch32_setup_vectors_page(struct linux_binprm *bprm, int uses_interp)
+static int aarch32_kuser_helpers_setup(struct mm_struct *mm)
{
- struct mm_struct *mm = current->mm;
- unsigned long addr = AARCH32_VECTORS_BASE;
- static const struct vm_special_mapping spec = {
- .name = "[vectors]",
- .pages = vectors_page,
+ void *ret;
+
+ /* The kuser helpers must be mapped at the ABI-defined high address */
+ ret = _install_special_mapping(mm, AARCH32_KUSER_BASE, PAGE_SIZE,
+ VM_READ | VM_EXEC |
+ VM_MAYREAD | VM_MAYEXEC,
+ &aarch32_vdso_spec[0]);
+
+ return PTR_ERR_OR_ZERO(ret);
+}
- };
+static int aarch32_sigreturn_setup(struct mm_struct *mm)
+{
+ unsigned long addr;
void *ret;
- if (down_write_killable(&mm->mmap_sem))
- return -EINTR;
- current->mm->context.vdso = (void *)addr;
+ addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0);
+ if (IS_ERR_VALUE(addr)) {
+ ret = ERR_PTR(addr);
+ goto out;
+ }
- /* Map vectors page at the high address. */
ret = _install_special_mapping(mm, addr, PAGE_SIZE,
- VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC,
- &spec);
+ VM_READ | VM_EXEC | VM_MAYREAD |
+ VM_MAYWRITE | VM_MAYEXEC,
+ &aarch32_vdso_spec[1]);
+ if (IS_ERR(ret))
+ goto out;
- up_write(&mm->mmap_sem);
+ mm->context.vdso = (void *)addr;
+out:
return PTR_ERR_OR_ZERO(ret);
}
+
+int aarch32_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
+{
+ struct mm_struct *mm = current->mm;
+ int ret;
+
+ if (down_write_killable(&mm->mmap_sem))
+ return -EINTR;
+
+ ret = aarch32_kuser_helpers_setup(mm);
+ if (ret)
+ goto out;
+
+ ret = aarch32_sigreturn_setup(mm);
+
+out:
+ up_write(&mm->mmap_sem);
+ return ret;
+}
#endif /* CONFIG_COMPAT */
static int vdso_mremap(const struct vm_special_mapping *sm,
In the current implementation AArch32 installs a special page called "[vectors]" that contains sigreturn trampolines and kuser helpers, and this is done at fixed address specified by the kuser helpers ABI. Having sigreturn trampolines and kuser helpers in the same page, makes difficult to maintain compatibility with arm because it makes not possible to disable kuser helpers. This patch addresses the problem creating separate pages for vectors and sigpage in a similar fashion to what happens today on arm. This patch changes as well the meaning of mm->context.vdso for AArch32 compat since it now points to sigpage and not to vectors anymore in order to make simpler the implementation of the signal handling (the address of sigpage is randomized). Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> --- arch/arm64/include/asm/elf.h | 6 +- arch/arm64/include/asm/processor.h | 4 +- arch/arm64/include/asm/signal32.h | 2 - arch/arm64/kernel/signal32.c | 5 +- arch/arm64/kernel/vdso.c | 112 ++++++++++++++++++++++------- 5 files changed, 93 insertions(+), 36 deletions(-)