| Message ID | 20181123141831.8214-7-miquel.raynal@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Bring suspend to RAM support to PCIe Aardvark driver | expand |
On Fri, 23 Nov 2018 15:18:25 +0100, Miquel Raynal wrote: > A GPIO might be used to reset the PCI IP. Describe the property needed > in this case. > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> > --- > Documentation/devicetree/bindings/pci/aardvark-pci.txt | 5 +++++ > 1 file changed, 5 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt index 310ef7145c47..252934237138 100644 --- a/Documentation/devicetree/bindings/pci/aardvark-pci.txt +++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt @@ -20,6 +20,10 @@ contain the following properties: define the mapping of the PCIe interface to interrupt numbers. - bus-range: PCI bus numbers covered +The following are optional properties: + + - reset-gpios: GPIO to reset the device + In addition, the Device Tree describing an Aardvark PCIe controller must include a sub-node that describes the legacy interrupt controller built into the PCIe controller. This sub-node must have the following @@ -48,6 +52,7 @@ Example: <0 0 0 2 &pcie_intc 1>, <0 0 0 3 &pcie_intc 2>, <0 0 0 4 &pcie_intc 3>; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_HIGH>; pcie_intc: interrupt-controller { interrupt-controller; #interrupt-cells = <1>;
A GPIO might be used to reset the PCI IP. Describe the property needed in this case. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- Documentation/devicetree/bindings/pci/aardvark-pci.txt | 5 +++++ 1 file changed, 5 insertions(+)