diff mbox series

[11/19] cpufreq: tegra124: do not handle the CPU rail

Message ID 20181204092548.3038-12-josephl@nvidia.com (mailing list archive)
State New, archived
Headers show
Series Tegra210 DFLL support | expand

Commit Message

Joseph Lo Dec. 4, 2018, 9:25 a.m. UTC
The Tegra124 cpufreq driver has no information to handle the Vdd-CPU
rail. So the driver shouldn't handle for the CPU clock switching from
DFLL to other PLL clocks. It was designed to work on DFLL clock only,
which handle the frequency/voltage scaling in the background. This
patch removes the driver dependency of the CPU rail.

Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Joseph Lo <josephl@nvidia.com>
---
 drivers/cpufreq/Kconfig.arm        |  2 +-
 drivers/cpufreq/tegra124-cpufreq.c | 26 ++------------------------
 2 files changed, 3 insertions(+), 25 deletions(-)

Comments

Jon Hunter Dec. 7, 2018, 2:49 p.m. UTC | #1
On 04/12/2018 09:25, Joseph Lo wrote:
> The Tegra124 cpufreq driver has no information to handle the Vdd-CPU
> rail. So the driver shouldn't handle for the CPU clock switching from
> DFLL to other PLL clocks. It was designed to work on DFLL clock only,
> which handle the frequency/voltage scaling in the background. This
> patch removes the driver dependency of the CPU rail.
> 
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: linux-pm@vger.kernel.org
> Signed-off-by: Joseph Lo <josephl@nvidia.com>
> ---
>  drivers/cpufreq/Kconfig.arm        |  2 +-
>  drivers/cpufreq/tegra124-cpufreq.c | 26 ++------------------------
>  2 files changed, 3 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index 4e1131ef85ae..a609f8820c47 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -262,7 +262,7 @@ config ARM_TEGRA20_CPUFREQ
>  
>  config ARM_TEGRA124_CPUFREQ
>  	tristate "Tegra124 CPUFreq support"
> -	depends on ARCH_TEGRA && CPUFREQ_DT && REGULATOR
> +	depends on ARCH_TEGRA && CPUFREQ_DT
>  	default y
>  	help
>  	  This adds the CPUFreq driver support for Tegra124 SOCs.
> diff --git a/drivers/cpufreq/tegra124-cpufreq.c b/drivers/cpufreq/tegra124-cpufreq.c
> index 43530254201a..448d00763d00 100644
> --- a/drivers/cpufreq/tegra124-cpufreq.c
> +++ b/drivers/cpufreq/tegra124-cpufreq.c
> @@ -22,11 +22,9 @@
>  #include <linux/of.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_opp.h>
> -#include <linux/regulator/consumer.h>
>  #include <linux/types.h>
>  
>  struct tegra124_cpufreq_priv {
> -	struct regulator *vdd_cpu_reg;
>  	struct clk *cpu_clk;
>  	struct clk *pllp_clk;
>  	struct clk *pllx_clk;
> @@ -60,14 +58,6 @@ static int tegra124_cpu_switch_to_dfll(struct tegra124_cpufreq_priv *priv)
>  	return ret;
>  }
>  
> -static void tegra124_cpu_switch_to_pllx(struct tegra124_cpufreq_priv *priv)
> -{
> -	clk_set_parent(priv->cpu_clk, priv->pllp_clk);
> -	clk_disable_unprepare(priv->dfll_clk);
> -	regulator_sync_voltage(priv->vdd_cpu_reg);
> -	clk_set_parent(priv->cpu_clk, priv->pllx_clk);
> -}
> -
>  static int tegra124_cpufreq_probe(struct platform_device *pdev)
>  {
>  	struct tegra124_cpufreq_priv *priv;
> @@ -88,16 +78,10 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev)
>  	if (!np)
>  		return -ENODEV;
>  
> -	priv->vdd_cpu_reg = regulator_get(cpu_dev, "vdd-cpu");
> -	if (IS_ERR(priv->vdd_cpu_reg)) {
> -		ret = PTR_ERR(priv->vdd_cpu_reg);
> -		goto out_put_np;
> -	}
> -
>  	priv->cpu_clk = of_clk_get_by_name(np, "cpu_g");
>  	if (IS_ERR(priv->cpu_clk)) {
>  		ret = PTR_ERR(priv->cpu_clk);
> -		goto out_put_vdd_cpu_reg;
> +		goto out_put_np;
>  	}
>  
>  	priv->dfll_clk = of_clk_get_by_name(np, "dfll");
> @@ -129,15 +113,13 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev)
>  		platform_device_register_full(&cpufreq_dt_devinfo);
>  	if (IS_ERR(priv->cpufreq_dt_pdev)) {
>  		ret = PTR_ERR(priv->cpufreq_dt_pdev);
> -		goto out_switch_to_pllx;
> +		goto out_put_pllp_clk;
>  	}
>  
>  	platform_set_drvdata(pdev, priv);
>  
>  	return 0;
>  
> -out_switch_to_pllx:
> -	tegra124_cpu_switch_to_pllx(priv);
>  out_put_pllp_clk:
>  	clk_put(priv->pllp_clk);
>  out_put_pllx_clk:
> @@ -146,8 +128,6 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev)
>  	clk_put(priv->dfll_clk);
>  out_put_cpu_clk:
>  	clk_put(priv->cpu_clk);
> -out_put_vdd_cpu_reg:
> -	regulator_put(priv->vdd_cpu_reg);
>  out_put_np:
>  	of_node_put(np);
>  
> @@ -159,13 +139,11 @@ static int tegra124_cpufreq_remove(struct platform_device *pdev)
>  	struct tegra124_cpufreq_priv *priv = platform_get_drvdata(pdev);
>  
>  	platform_device_unregister(priv->cpufreq_dt_pdev);
> -	tegra124_cpu_switch_to_pllx(priv);
>  
>  	clk_put(priv->pllp_clk);
>  	clk_put(priv->pllx_clk);
>  	clk_put(priv->dfll_clk);
>  	clk_put(priv->cpu_clk);
> -	regulator_put(priv->vdd_cpu_reg);

I see what you are saying and while this does appear to be broken, it
also does not seem right that if we load and unload this driver the CPU
clock parent will remain as the DFLL clock. Can't we query the voltage
of the vdd-cpu regulator before we switch and then restore it before we
switch back?

I am just trying to understand if there is no way to switch back? If not
then maybe we should not allow this driver to be built as a module and
remove the removal function altogether.

Cheers
Jon
Joseph Lo Dec. 11, 2018, 8:48 a.m. UTC | #2
On 12/7/18 10:49 PM, Jon Hunter wrote:
> 
> On 04/12/2018 09:25, Joseph Lo wrote:
>> The Tegra124 cpufreq driver has no information to handle the Vdd-CPU
>> rail. So the driver shouldn't handle for the CPU clock switching from
>> DFLL to other PLL clocks. It was designed to work on DFLL clock only,
>> which handle the frequency/voltage scaling in the background. This
>> patch removes the driver dependency of the CPU rail.
>>
>> Cc: Viresh Kumar <viresh.kumar@linaro.org>
>> Cc: linux-pm@vger.kernel.org
>> Signed-off-by: Joseph Lo <josephl@nvidia.com>
>> ---
>>   drivers/cpufreq/Kconfig.arm        |  2 +-
>>   drivers/cpufreq/tegra124-cpufreq.c | 26 ++------------------------
>>   2 files changed, 3 insertions(+), 25 deletions(-)
>>
>> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
>> index 4e1131ef85ae..a609f8820c47 100644
>> --- a/drivers/cpufreq/Kconfig.arm
>> +++ b/drivers/cpufreq/Kconfig.arm
>> @@ -262,7 +262,7 @@ config ARM_TEGRA20_CPUFREQ
>>   
>>   config ARM_TEGRA124_CPUFREQ
>>   	tristate "Tegra124 CPUFreq support"
>> -	depends on ARCH_TEGRA && CPUFREQ_DT && REGULATOR
>> +	depends on ARCH_TEGRA && CPUFREQ_DT
>>   	default y
>>   	help
>>   	  This adds the CPUFreq driver support for Tegra124 SOCs.
>> diff --git a/drivers/cpufreq/tegra124-cpufreq.c b/drivers/cpufreq/tegra124-cpufreq.c
>> index 43530254201a..448d00763d00 100644
>> --- a/drivers/cpufreq/tegra124-cpufreq.c
>> +++ b/drivers/cpufreq/tegra124-cpufreq.c
>> @@ -22,11 +22,9 @@
>>   #include <linux/of.h>
>>   #include <linux/platform_device.h>
>>   #include <linux/pm_opp.h>
>> -#include <linux/regulator/consumer.h>
>>   #include <linux/types.h>
>>   
>>   struct tegra124_cpufreq_priv {
>> -	struct regulator *vdd_cpu_reg;
>>   	struct clk *cpu_clk;
>>   	struct clk *pllp_clk;
>>   	struct clk *pllx_clk;
>> @@ -60,14 +58,6 @@ static int tegra124_cpu_switch_to_dfll(struct tegra124_cpufreq_priv *priv)
>>   	return ret;
>>   }
>>   
>> -static void tegra124_cpu_switch_to_pllx(struct tegra124_cpufreq_priv *priv)
>> -{
>> -	clk_set_parent(priv->cpu_clk, priv->pllp_clk);
>> -	clk_disable_unprepare(priv->dfll_clk);
>> -	regulator_sync_voltage(priv->vdd_cpu_reg);
>> -	clk_set_parent(priv->cpu_clk, priv->pllx_clk);
>> -}
>> -
>>   static int tegra124_cpufreq_probe(struct platform_device *pdev)
>>   {
>>   	struct tegra124_cpufreq_priv *priv;
>> @@ -88,16 +78,10 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev)
>>   	if (!np)
>>   		return -ENODEV;
>>   
>> -	priv->vdd_cpu_reg = regulator_get(cpu_dev, "vdd-cpu");
>> -	if (IS_ERR(priv->vdd_cpu_reg)) {
>> -		ret = PTR_ERR(priv->vdd_cpu_reg);
>> -		goto out_put_np;
>> -	}
>> -
>>   	priv->cpu_clk = of_clk_get_by_name(np, "cpu_g");
>>   	if (IS_ERR(priv->cpu_clk)) {
>>   		ret = PTR_ERR(priv->cpu_clk);
>> -		goto out_put_vdd_cpu_reg;
>> +		goto out_put_np;
>>   	}
>>   
>>   	priv->dfll_clk = of_clk_get_by_name(np, "dfll");
>> @@ -129,15 +113,13 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev)
>>   		platform_device_register_full(&cpufreq_dt_devinfo);
>>   	if (IS_ERR(priv->cpufreq_dt_pdev)) {
>>   		ret = PTR_ERR(priv->cpufreq_dt_pdev);
>> -		goto out_switch_to_pllx;
>> +		goto out_put_pllp_clk;
>>   	}
>>   
>>   	platform_set_drvdata(pdev, priv);
>>   
>>   	return 0;
>>   
>> -out_switch_to_pllx:
>> -	tegra124_cpu_switch_to_pllx(priv);
>>   out_put_pllp_clk:
>>   	clk_put(priv->pllp_clk);
>>   out_put_pllx_clk:
>> @@ -146,8 +128,6 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev)
>>   	clk_put(priv->dfll_clk);
>>   out_put_cpu_clk:
>>   	clk_put(priv->cpu_clk);
>> -out_put_vdd_cpu_reg:
>> -	regulator_put(priv->vdd_cpu_reg);
>>   out_put_np:
>>   	of_node_put(np);
>>   
>> @@ -159,13 +139,11 @@ static int tegra124_cpufreq_remove(struct platform_device *pdev)
>>   	struct tegra124_cpufreq_priv *priv = platform_get_drvdata(pdev);
>>   
>>   	platform_device_unregister(priv->cpufreq_dt_pdev);
>> -	tegra124_cpu_switch_to_pllx(priv);
>>   
>>   	clk_put(priv->pllp_clk);
>>   	clk_put(priv->pllx_clk);
>>   	clk_put(priv->dfll_clk);
>>   	clk_put(priv->cpu_clk);
>> -	regulator_put(priv->vdd_cpu_reg);
> 
> I see what you are saying and while this does appear to be broken, it
> also does not seem right that if we load and unload this driver the CPU
> clock parent will remain as the DFLL clock. Can't we query the voltage
> of the vdd-cpu regulator before we switch and then restore it before we
> switch back? >
> I am just trying to understand if there is no way to switch back? If not
> then maybe we should not allow this driver to be built as a module and
> remove the removal function altogether.

No, we shouldn't switch back to PLL clock once we switched to DFLL 
clock. The reason is that the PLL clock applies to different 
voltage/freq table. That may not match the table, we are using for DFLL 
clock. The cclkg is designed to work on DFLL only.The safest way here is 
remaining the cclkg on DFLL closed-loop mode or switching to open-loop 
mode. Make it always work on DFLL closed-loop mode is better.

By default the configuration is built-in now. Sounds good to me to fix 
the configuration option and remove the removal function.

Thanks,
Joseph
diff mbox series

Patch

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 4e1131ef85ae..a609f8820c47 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -262,7 +262,7 @@  config ARM_TEGRA20_CPUFREQ
 
 config ARM_TEGRA124_CPUFREQ
 	tristate "Tegra124 CPUFreq support"
-	depends on ARCH_TEGRA && CPUFREQ_DT && REGULATOR
+	depends on ARCH_TEGRA && CPUFREQ_DT
 	default y
 	help
 	  This adds the CPUFreq driver support for Tegra124 SOCs.
diff --git a/drivers/cpufreq/tegra124-cpufreq.c b/drivers/cpufreq/tegra124-cpufreq.c
index 43530254201a..448d00763d00 100644
--- a/drivers/cpufreq/tegra124-cpufreq.c
+++ b/drivers/cpufreq/tegra124-cpufreq.c
@@ -22,11 +22,9 @@ 
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm_opp.h>
-#include <linux/regulator/consumer.h>
 #include <linux/types.h>
 
 struct tegra124_cpufreq_priv {
-	struct regulator *vdd_cpu_reg;
 	struct clk *cpu_clk;
 	struct clk *pllp_clk;
 	struct clk *pllx_clk;
@@ -60,14 +58,6 @@  static int tegra124_cpu_switch_to_dfll(struct tegra124_cpufreq_priv *priv)
 	return ret;
 }
 
-static void tegra124_cpu_switch_to_pllx(struct tegra124_cpufreq_priv *priv)
-{
-	clk_set_parent(priv->cpu_clk, priv->pllp_clk);
-	clk_disable_unprepare(priv->dfll_clk);
-	regulator_sync_voltage(priv->vdd_cpu_reg);
-	clk_set_parent(priv->cpu_clk, priv->pllx_clk);
-}
-
 static int tegra124_cpufreq_probe(struct platform_device *pdev)
 {
 	struct tegra124_cpufreq_priv *priv;
@@ -88,16 +78,10 @@  static int tegra124_cpufreq_probe(struct platform_device *pdev)
 	if (!np)
 		return -ENODEV;
 
-	priv->vdd_cpu_reg = regulator_get(cpu_dev, "vdd-cpu");
-	if (IS_ERR(priv->vdd_cpu_reg)) {
-		ret = PTR_ERR(priv->vdd_cpu_reg);
-		goto out_put_np;
-	}
-
 	priv->cpu_clk = of_clk_get_by_name(np, "cpu_g");
 	if (IS_ERR(priv->cpu_clk)) {
 		ret = PTR_ERR(priv->cpu_clk);
-		goto out_put_vdd_cpu_reg;
+		goto out_put_np;
 	}
 
 	priv->dfll_clk = of_clk_get_by_name(np, "dfll");
@@ -129,15 +113,13 @@  static int tegra124_cpufreq_probe(struct platform_device *pdev)
 		platform_device_register_full(&cpufreq_dt_devinfo);
 	if (IS_ERR(priv->cpufreq_dt_pdev)) {
 		ret = PTR_ERR(priv->cpufreq_dt_pdev);
-		goto out_switch_to_pllx;
+		goto out_put_pllp_clk;
 	}
 
 	platform_set_drvdata(pdev, priv);
 
 	return 0;
 
-out_switch_to_pllx:
-	tegra124_cpu_switch_to_pllx(priv);
 out_put_pllp_clk:
 	clk_put(priv->pllp_clk);
 out_put_pllx_clk:
@@ -146,8 +128,6 @@  static int tegra124_cpufreq_probe(struct platform_device *pdev)
 	clk_put(priv->dfll_clk);
 out_put_cpu_clk:
 	clk_put(priv->cpu_clk);
-out_put_vdd_cpu_reg:
-	regulator_put(priv->vdd_cpu_reg);
 out_put_np:
 	of_node_put(np);
 
@@ -159,13 +139,11 @@  static int tegra124_cpufreq_remove(struct platform_device *pdev)
 	struct tegra124_cpufreq_priv *priv = platform_get_drvdata(pdev);
 
 	platform_device_unregister(priv->cpufreq_dt_pdev);
-	tegra124_cpu_switch_to_pllx(priv);
 
 	clk_put(priv->pllp_clk);
 	clk_put(priv->pllx_clk);
 	clk_put(priv->dfll_clk);
 	clk_put(priv->cpu_clk);
-	regulator_put(priv->vdd_cpu_reg);
 
 	return 0;
 }