@@ -290,7 +290,6 @@
&spdif {
pinctrl-0 = <&spdifm0_tx>;
status = "okay";
- #sound-dai-cells = <0>;
spdif_p0: port {
spdif_p0_0: endpoint {
@@ -184,6 +184,7 @@
clock-names = "i2s_clk", "i2s_hclk";
dmas = <&dmac 11>, <&dmac 12>;
dma-names = "tx", "rx";
+ #sound-dai-cells = <0>;
status = "disabled";
};
@@ -195,6 +196,7 @@
clock-names = "i2s_clk", "i2s_hclk";
dmas = <&dmac 14>, <&dmac 15>;
dma-names = "tx", "rx";
+ #sound-dai-cells = <0>;
status = "disabled";
};
@@ -206,6 +208,7 @@
clock-names = "i2s_clk", "i2s_hclk";
dmas = <&dmac 0>, <&dmac 1>;
dma-names = "tx", "rx";
+ #sound-dai-cells = <0>;
status = "disabled";
};
@@ -219,6 +222,7 @@
dma-names = "tx";
pinctrl-names = "default";
pinctrl-0 = <&spdifm2_tx>;
+ #sound-dai-cells = <0>;
status = "disabled";
};
The rk3328 i2s and spdif controllers only ever have one output connection, so as with all implementations of the rk3066 i2s controllers we can keep the #sound-dai-cells in the main dtsi instead of having it repeated in each board. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 1 - arch/arm64/boot/dts/rockchip/rk3328.dtsi | 4 ++++ 2 files changed, 4 insertions(+), 1 deletion(-)