diff mbox series

[3/6] ARM: dts: s5pv210: fascinate4g: Remove hardcoded bootargs

Message ID 20181228161819.18931-4-pawel.mikolaj.chmiel@gmail.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: s5pv210: aries: Enable more drivers present on Samsung Aries based devices | expand

Commit Message

Paweł Chmiel Dec. 28, 2018, 4:18 p.m. UTC
Since we have uboot (flashed in place of stock kernel),
it's not needed anymore to hardcode bootargs.

Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
---
 arch/arm/boot/dts/s5pv210-fascinate4g.dts | 7 -------
 1 file changed, 7 deletions(-)

Comments

Krzysztof Kozlowski Jan. 7, 2019, 7:20 p.m. UTC | #1
On Fri, Dec 28, 2018 at 05:18:16PM +0100, Paweł Chmiel wrote:
> Since we have uboot (flashed in place of stock kernel),
> it's not needed anymore to hardcode bootargs.
> 
> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
> ---
>  arch/arm/boot/dts/s5pv210-fascinate4g.dts | 7 -------

Thanks, applied (squashed with previous one).

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index ccf761b1babf..07a8d9bbe5b8 100644
--- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -11,13 +11,6 @@ 
 
 	chosen {
 		stdout-path = &uart2;
-		/*
-		 * It's hard to change those parameters in stock bootloader,
-		 * since it requires special hardware/cable.
-		 * Let's hardocde bootargs for now, till u-boot port is finished,
-		 * with which it should be easier.
-		 */
-		bootargs = "root=/dev/mmcblk1p1 rw rootwait ignore_loglevel earlyprintk";
 	};
 
 	gpio-keys {