[v2,4/4] ARM: defconfig: s5pv210: Enable more drivers present on Samsung Aries

Commit Message

Paweł Chmiel Jan. 8, 2019, 4:56 p.m. UTC

This commit enables following drivers:
- i2c support (using s3c2410 driver)
- s5p-jpeg
- s5p-mfc
- exynos drm rotator
- pwm support
- pwm vibrator
- fixed regulator
- syscon poweroff
- Atmel maXTouch touchscreen
- Broadcom BCM4329 bluetooth over uart0
- dma devices (so we can use pl330 dma driver)

Disable DEBUG_LL. It's currently set to uart1, but if we want to use it
on Aries, we would need to switch it to uart2, to get any logs.

Signed-off-by: Paweł Chmiel <[e-mail]>
Signed-off-by: Jonathan Bakker <[e-mail]>
---
 arch/arm/configs/s5pv210_defconfig | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

Patch

diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
index 0159636d4c0d..951196bdf008 100644
--- a/arch/arm/configs/s5pv210_defconfig
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -27,6 +27,11 @@  CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_BCM=y
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -44,21 +49,35 @@  CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PWM_VIBRA=m
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_SAMSUNG=y
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
 CONFIG_HW_RANDOM=y
 CONFIG_I2C_GPIO=y
+CONFIG_I2C_S3C2410=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_BATTERY_MAX17040=y
 # CONFIG_HWMON is not set
 CONFIG_MFD_MAX8998=y
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_MAX8998=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
+CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
 CONFIG_DRM=y
 CONFIG_DRM_EXYNOS=y
 CONFIG_DRM_EXYNOS_FIMD=y
 CONFIG_DRM_EXYNOS_DPI=y
+CONFIG_DRM_EXYNOS_ROTATOR=y
 CONFIG_USB=y
 CONFIG_USB_OTG=y
 CONFIG_USB_EHCI_HCD=y
@@ -72,6 +91,9 @@  CONFIG_MMC_SDHCI_S3C=y
 CONFIG_MMC_SDHCI_S3C_DMA=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MAX8998=m
+CONFIG_DMADEVICES=y
+CONFIG_PWM=y
+CONFIG_PWM_SAMSUNG=y
 CONFIG_PHY_SAMSUNG_USB2=m
 CONFIG_PHY_S5PV210_USB2=y
 CONFIG_EXT2_FS=y
@@ -97,6 +119,3 @@  CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_ATOMIC_SLEEP=y
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_S3C_UART1=y
-CONFIG_EARLY_PRINTK=y