@@ -4,6 +4,20 @@ menu "Intel IXP4xx Implementation Options"
comment "IXP4xx Platforms"
+config MACH_IXP4XX_OF
+ bool
+ prompt "Devce Tree IXP4xx boards"
+ default y
+ select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
+ select I2C
+ select I2C_IOP3XX
+ select PCI
+ select SERIAL_OF_PLATFORM
+ select TIMER_OF
+ select USE_OF
+ help
+ Say 'Y' here to support Device Tree-based IXP4xx platforms.
+
config MACH_NSLU2
bool
prompt "Linksys NSLU2"
@@ -6,6 +6,9 @@
obj-pci-y :=
obj-pci-n :=
+# Device tree platform
+obj-pci-$(CONFIG_MACH_IXP4XX_OF) += ixp4xx-of.o
+
obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
new file mode 100644
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IXP4xx Device Tree boot support
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+
+#ifdef CONFIG_DEBUG_UART_8250
+/* This is needed for LL-debug/earlyprintk/debug-macro.S */
+static struct map_desc ixp4xx_of_io_desc[] __initdata = {
+ {
+ .virtual = CONFIG_DEBUG_UART_VIRT,
+ .pfn = __phys_to_pfn(CONFIG_DEBUG_UART_PHYS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init ixp4xx_of_map_io(void)
+{
+ iotable_init(ixp4xx_of_io_desc, ARRAY_SIZE(ixp4xx_of_io_desc));
+}
+#else
+#define ixp4xx_of_map_io NULL
+#endif
+
+/*
+ * We handle 4 differen SoC families. These compatible strings are enough
+ * to provide the core so that different boards can add their more detailed
+ * specifics.
+ */
+static const char *ixp4xx_of_board_compat[] = {
+ "intel,ixp42x",
+ "intel,ixp43x",
+ "intel,ixp45x",
+ "intel,ixp46x",
+ NULL,
+};
+
+DT_MACHINE_START(IXP4XX_DT, "IXP4xx (Device Tree)")
+ .map_io = ixp4xx_of_map_io,
+ .dt_compat = ixp4xx_of_board_compat,
+MACHINE_END
@@ -20,6 +20,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <mach/npe.h>
#define DEBUG_MSG 0
@@ -688,6 +689,10 @@ static int __init npe_init_module(void)
int i, found = 0;
+ /* This driver does not work with device tree */
+ if (of_have_populated_dt())
+ return -ENODEV;
+
for (i = 0; i < NPE_COUNT; i++) {
struct npe *npe = &npe_tab[i];
if (!(ixp4xx_read_feature_bits() &
@@ -12,6 +12,7 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <mach/qmgr.h>
#include "irqs.h"
@@ -289,6 +290,10 @@ static int qmgr_init(void)
int i, err;
irq_handler_t handler1, handler2;
+ /* This driver does not work with device tree */
+ if (of_have_populated_dt())
+ return -ENODEV;
+
mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
IXP4XX_QMGR_REGION_SIZE,
"IXP4xx Queue Manager");
@@ -31,6 +31,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/net_tstamp.h>
+#include <linux/of.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <linux/ptp_classify.h>
@@ -1497,6 +1498,15 @@ static struct platform_driver ixp4xx_eth_driver = {
static int __init eth_init_module(void)
{
int err;
+
+ /*
+ * FIXME: we bail out on device tree boot but this really needs
+ * to be fixed in a nicer way: this registers the MDIO bus before
+ * even matching the driver infrastructure, we should only probe
+ * detected hardware.
+ */
+ if (of_have_populated_dt())
+ return -ENODEV;
if ((err = ixp4xx_mdio_register()))
return err;
return platform_driver_register(&ixp4xx_eth_driver);
@@ -21,6 +21,7 @@
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/miscdevice.h>
+#include <linux/of.h>
#include <linux/watchdog.h>
#include <linux/init.h>
#include <linux/bitops.h>
@@ -176,6 +177,14 @@ static int __init ixp4xx_wdt_init(void)
{
int ret;
+ /*
+ * FIXME: we bail out on device tree boot but this really needs
+ * to be fixed in a nicer way: this registers the MDIO bus before
+ * even matching the driver infrastructure, we should only probe
+ * detected hardware.
+ */
+ if (of_have_populated_dt())
+ return -ENODEV;
if (!(read_cpuid_id() & 0xf) && !cpu_is_ixp46x()) {
pr_err("Rev. A0 IXP42x CPU detected - watchdog disabled\n");
This adds a minimal support for booting IXP4xx systems from device tree. We have to add hacks to the QMGR, NPE and notably also ethernet and watchdog drivers so that they don't crash the platform: these drivers are unconditionally starting to grab regions of statically remapped IO space with no concern of the device model or other platforms. We will go in and properly fix these drivers as we go along but for now this hack gets us to a place where we can start working on proper device tree support for these platforms. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/mach-ixp4xx/Kconfig | 14 +++++++ arch/arm/mach-ixp4xx/Makefile | 3 ++ arch/arm/mach-ixp4xx/ixp4xx-of.c | 49 ++++++++++++++++++++++++ arch/arm/mach-ixp4xx/ixp4xx_npe.c | 5 +++ arch/arm/mach-ixp4xx/ixp4xx_qmgr.c | 5 +++ drivers/net/ethernet/xscale/ixp4xx_eth.c | 10 +++++ drivers/watchdog/ixp4xx_wdt.c | 9 +++++ 7 files changed, 95 insertions(+) create mode 100644 arch/arm/mach-ixp4xx/ixp4xx-of.c