@@ -183,6 +183,37 @@
clock-output-names = "osc32k";
};
+ /*
+ * The following two are dummy clocks, placeholders
+ * used in the gmac_tx clock. The gmac driver will
+ * choose one parent depending on the PHY interface
+ * mode, using clk_set_rate auto-reparenting.
+ *
+ * The actual TX clock rate is not controlled by the
+ * gmac_tx clock.
+ */
+ mii_phy_tx_clk: mii_phy_tx_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ clock-output-names = "mii_phy_tx";
+ };
+
+ gmac_int_tx_clk: gmac_int_tx_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_int_tx";
+ };
+
+ gmac_tx_clk: clk@800030 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-gmac-clk";
+ reg = <0x00800030 0x4>;
+ clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+ clock-output-names = "gmac_tx";
+ };
+
cpus_clk: clk@8001410 {
compatible = "allwinner,sun9i-a80-cpus-clk";
reg = <0x08001410 0x4>;
The A80 has the same DWMAC hardware as on earlier Allwinner SoCs. The accompanying GMAC clock register has been moved into the "System Control" area. Add a clock node for it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- arch/arm/boot/dts/sun9i-a80.dtsi | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)