mbox series

[GIT,PULL,5/7] i.MX arm64 device tree changes for 5.1

Message ID 20190212112126.572-5-shawnguo@kernel.org (mailing list archive)
State Mainlined, archived
Commit ca04fed4706dfb13cb964be2dc294054ed0efb6b
Headers show
Series [GIT,PULL,1/7] i.MX drivers update for 5.1 | expand

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.1

Message

Shawn Guo Feb. 12, 2019, 11:21 a.m. UTC 
The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:

  Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.1

for you to fetch changes up to ca04fed4706dfb13cb964be2dc294054ed0efb6b:

  arm64: dts: imx8mq: specify dma-ranges (2019-02-11 13:44:12 +0800)

----------------------------------------------------------------
i.MX arm64 device tree changes for 5.1:
 - Add initial i.MX8QXP SoC and MEK board support.
 - Various device additions to i.MX8MQ SoC and EVK board support:
   RTC, QuadSPI, PMU, ECSPI, PWM, GPC power domain, USB etc.
 - Use generic node name for m25p80 flash on layerscape devices.
 - Add num-viewport property for layerscape PCIe devices, and
   incr-burst-type-adjustment for USB3 devices.
 - Add LS1012AX based Oxalis board support.
 - Add fsl-mc, FlexSPI device and dma-ranges property for LX2160A SoC.
 - Add SMMU device and missing dma-coherent property in fsl-mc for
   LS1088 SoC.

----------------------------------------------------------------
Abel Vesa (1):
      arm64: dts: imx8mq: Add RTC support

Aisheng Dong (2):
      arm64: dts: imx: add imx8qxp support
      arm64: dts: imx: add imx8qxp mek support

Alexandre Belloni (3):
      arm64: dts: fsl: use a generic node name for m25p80 flashes
      arm64: dts: fsl: ls1046a: disable the flash controller by default
      arm64: dts: fsl: ls1046a: disable uarts by default

Anson Huang (1):
      arm64: dts: imx: add i.MX8QXP system controller RTC support

Carlo Caione (5):
      arm64: dts: imx8mq-evk: add missing MDIO / PHY nodes
      arm64: dts: imx8mq-evk: Add fsl,magic-packet property
      arm64: dts: imx8mq: Add QuadSPI controller
      arm64: dts: imx8mq-evk: Enable the QuadSPI controller
      arm64: dts: imx8mq: Add ARM PMU node

Daniel Baluta (1):
      arm64: dts: imx8qxp: Fix MU4_INT number

Fabio Estevam (1):
      arm64: dts: imx8mq: Add ECSPI support

Guido Günther (1):
      arm64: dts: imx8mq: Add pwm device nodes

Hou Zhiqiang (1):
      arm64: dts: layerscape: add num-viewport property for PCIe DT nodes

Ioana Ciocoi Radulescu (2):
      arm64: dts: lx2160a: Add fsl-mc node
      arm64: dts: lx2160a: Add dma-ranges property

Lucas Stach (6):
      arm64: dts: imx8mq: move watchdog nodes to correct location
      arm64: dts: imx8mq: add GPC power domains
      arm64: dts: imx8mq: properly describe IRQ hierarchy
      arm64: dts: imx8mq: add USB nodes
      arm64: dts: imx8mq-evk: enable USB nodes for USB3 host
      arm64: dts: imx8mq: specify dma-ranges

Manivannan Sadhasivam (1):
      arm64: dts: freescale: Add devicetree for Oxalis

Nipun Gupta (2):
      arm64: dts: ls1088: add smmu device node
      arm64: dts: ls1088: add missing dma-coherent property in fsl-mc

Ran Wang (1):
      arm64: dts: layerscape: Add incr-burst-type-adjustment property to USB3 node

Yogesh Narayan Gaur (2):
      arm64: dts: lx2160a: add FlexSPI node property
      arm64: dts: lx2160a: update fspi node

 arch/arm64/boot/dts/freescale/Makefile             |   2 +
 .../boot/dts/freescale/fsl-ls1012a-oxalis.dts      |  96 +++++
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi     |   2 +
 arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts  |   2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi     |   6 +
 arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts  |   2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts  |   4 +-
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi     |  11 +
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi     |  97 ++++-
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     |   6 +
 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts  |  26 ++
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi     | 133 ++++++
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts       |  47 +++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi          | 304 ++++++++++++--
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts      | 137 +++++++
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi         | 446 +++++++++++++++++++++
 16 files changed, 1292 insertions(+), 29 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp.dtsi

Comments

Arnd Bergmann Feb. 15, 2019, 3:11 p.m. UTC | #1 
On Tue, Feb 12, 2019 at 12:22 PM Shawn Guo <shawnguo@kernel.org> wrote:
>
> The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:
>
>   Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)
>
> are available in the Git repository at:
>
>   git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.1
>
> for you to fetch changes up to ca04fed4706dfb13cb964be2dc294054ed0efb6b:
>
>   arm64: dts: imx8mq: specify dma-ranges (2019-02-11 13:44:12 +0800)
>
> ----------------------------------------------------------------
> i.MX arm64 device tree changes for 5.1:
>  - Add initial i.MX8QXP SoC and MEK board support.
>  - Various device additions to i.MX8MQ SoC and EVK board support:
>    RTC, QuadSPI, PMU, ECSPI, PWM, GPC power domain, USB etc.
>  - Use generic node name for m25p80 flash on layerscape devices.
>  - Add num-viewport property for layerscape PCIe devices, and
>    incr-burst-type-adjustment for USB3 devices.
>  - Add LS1012AX based Oxalis board support.
>  - Add fsl-mc, FlexSPI device and dma-ranges property for LX2160A SoC.
>  - Add SMMU device and missing dma-coherent property in fsl-mc for
>    LS1088 SoC.

Pulled into arm/dt, thanks!

      Arnd