diff mbox series

[v3,3/5] arm64: dts: imx8mq: Combine PCIE power domains

Message ID 20190220015857.7136-4-andrew.smirnov@gmail.com (mailing list archive)
State New, archived
Headers show
Series PCIE support for i.MX8MQ (DT changes) | expand

Commit Message

Andrey Smirnov Feb. 20, 2019, 1:58 a.m. UTC 
According to NXP's FAE feedback and a comment in ATF firmware, PCIE1
and PCIE2 power domains can't really be used independently. Due to
shared reset line both power domains have to be turned on at the same
time. Account for that quirk by combining PCIE power domains into a
single 'pgc_pcie' power domain.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 50436bd393ed..fca9b71de94f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -273,9 +273,25 @@ 
 						reg = <IMX8M_POWER_DOMAIN_MIPI>;
 					};
 
-					pgc_pcie1: power-domain@1 {
+					/*
+					 * As per comment in ATF source code:
+					 *
+					 * PCIE1 and PCIE2 share the
+					 * same reset signal, if we
+					 * power down PCIE2, PCIE1
+					 * will be held in reset too.
+					 *
+					 * So instead of creating two
+					 * separate power domains for
+					 * PCIE1 and PCIE2 we create a
+					 * link between both and use
+					 * it as a shared PCIE power
+					 * domain.
+					 */
+					pgc_pcie: power-domain@1 {
 						#power-domain-cells = <0>;
 						reg = <IMX8M_POWER_DOMAIN_PCIE1>;
+						power-domains = <&pgc_pcie2>;
 					};
 
 					pgc_otg1: power-domain@2 {